Technical data

75
Installation – Vitocontrol-S, VD2/CT3/CM2
Mounting of the control unit
1.Fasten metal backplate onto
mounting surface with four
fasteners.
2.Position midplate between backplate
and connection enclosure.
3.Install midplate and connection
enclosure onto backplate.
4.Fasten connection enclosure and
midplate onto backplate with two
fasteners.
5.Install control rear section onto
connection enclosure housing. Hook
control onto backplate tabs and
pivot downwards.
6.Fasten control rear section onto
connection enclosure with two
fasteners.
5351 340 v1.4
2.
3.
1.
4.
5.
6.