Technical data

106
Service scanning – Vitotronic 100, GC1
Scanning operating conditions
1. Press .
2. Select the required operating
condition scan with or .
3. Press .
The following values can be scanned subject to the actual system layout:
Display
indication
Explanation Notes
0__01
LON participant number ––
3__65
˚C Boiler temperature ––
6__55
˚C Temperature at sensor “17A” Only with Therm-Control temperature sensor or
with temperature sensor T1
8_190
˚C Flue gas temperature Only with flue gas temperature sensor
9__60
˚C Temperature at sensor “17B” Only with temperature sensor T2
|
063572
h
Burner run hours
Stage 1
The run hours can be reset to 0 with D. The run
hours displayed are only approximate values
||
009572
h
Burner run hours
Stage 2
|||
030417
Burner starts The burner starts can be reset to 0 with D
||||
030585
Consumption When set via coding address 26 or 29 (only with
two-stage burner) the burner starts can be reset to
0 with D
|||||
001417
h
Solar pump run hours Only in connection with a solar system
||||||
002850
Solar energy in kWh Only in connection with a solar system
5351 340 v1.4
1 2 3 4 5 6 7