Operating instructions

56
5603 882 - 01
Pyrotec Installation & Operating
Pyrocontrol Control System (continued)
Screen 7, Overview, wood-powered boiler
Touching the KÖB Boiler soft touch key (photo in Screen 1)
opens Screen 7 (sectional view of the boiler).
Here the most important process parameters, activity modes
and operating hours are displayed. The operating mode
display is located in the centre upper left of the screen.
(For explanation on the text display, see “Operating modes”).
Measurement operation, emergency operation and the
activity of the de-ashing assembly with ash container as
well as that of the underfeed auger can all be operated
manually here.
Area of Screen 7, overview, wood-powered boiler Description
Screen
Top
Centre
Bottom
Screen title, e.g.
“Overview, Wood-powered Boiler”
Alarm line (bottom left, red)
User status (top right)
Date/Time (bottom right)
Back button (back to Screen 1)
A Display of operating mode
(top left, grey), e.g. “Load”
(heating operation)
B Display of supply/return
flow temperature (grey)
C Display of flue gas
parameters (right, grey)
D Display of furnace-firing
parameters (grey)
E Display of supply air blower
(left, grey)
F Object indicator light
(green/grey)
G Displays of operational
statistics
Soft touch key, left bottom:
Navigation (orange) for
Screens 2, 3 & 4:
Settings, Analysis, Archive
Soft touch key, bottom right:
Boiler ON (green)
Boiler OFF (red)
Lock screen (yellow)
Flue gas parameters, centre of screen:
Flue gas exhaust blower power (top), residual oxygen
(centre),
flue gas temperature (bottom).
Object indicator light (centre of screen, green or grey
squares):
Light barriers for embers and metering container:
If the object indicator light, lights up green, then there
is no blockage of the light barrier. If the object indicator
light is grey, the light barrier has been blocked (maximum
height of embers reached or metering container full).
The object indicator light gives no information about the
presence of any malfunction.
Operational statistics:
Here the respective sum of operating periods are listed
for load, maintenance and standby.
Soft touch key (Screen 7, centre):
-Measurement operation (see ‘Operating Mode’ section)
- Emergency operation (see ‘Operating Mode’ section)
- Ash, manual: When the soft touch key is touched,
the color of the field changes (dark/light). The
de-ashing auger runs until the soft touch key is
touched again or until a change is made to another
screen.
- Underfeed Stop: When the soft touch key is touched,
the color of the field changes (dark/light). The supply
of material into the combustion chamber door is
interrupted until the soft touch key is touched again
or until a change is made to another screen.
- Underfeed ON: When the soft touch key is touched
and held, the color of the field changes (dark/light).
Material is supplied into the combustion chamber door
until the soft touch key is released again.
A
B
C
D
E
F
G
F
Operation