Operating instructions

54
5603 882 - 01
Pyrotec Installation & Operating
Pyrocontrol Control System (continued)
Screen 3, Managing the user status
Touching the soft touch key “Status Level 0”, …1, 2 or 4
(at the top right of the Screen), the user level can be changed
and thus the access rights for entering settings stipulated.
To change the user level, no user name needs to be entered,
but all four possible levels are provided as buttons.
When the user level desired (0-4) is selected, a password
in the form of a 4-digit code will be asked for, which has
to be entered and confirmed with ENTER by touching the
white input cell using the pop-up number keypad. The
password will then appear in four asterisks (****) and
has to be confirmed again with OK.
Area of Screen 3 Description
Screen
Top
Centre
Bottom
Screen title “User Status”
Soft touch key for selecting
the user level desired
Password query window:
Always confirm with OK.
Input number keypad: Enter
the 4-digit code here and
confirm with

.
Display: current level
Back button (back to Screen1)
By introducing these user levels, Viessmann is making an effort to maintain the parameters essential for quality-assured
businesses. This guarantees good operational practice, as certain parameter changes are reserved only for Viessmann
technicians. This gives the user greater certainty that one cannot accidentally make any changes that would be
technically less favorable.
After making these entries, the newly selected status applies with the following user rights associated with it:
User level Password Rights
Standard Level 0
No password (

automatic
jump back to standard after
standstill period > 5 minutes).
No rights, no changing (only display)
Customer Level 1 1111 No selection of parameters with the trend display (Point 5.1)
Customer Level 2 2222 Parameter selection is possible
Administrator Level 4 No specification Administrator, access to Win CE Desktop as well as software
updating possible
Operation