Operating instructions

50
5603 882 - 01
Pyrotec Installation & Operating
Pyrocontrol Control System
The control system for the Pyrotec boiler firing process
(Pyrocontrol) is controlled by a Programmable Logic
Controller (PLC), which visualizes the system on a touch
screen and provides an interface for navigation and
entering settings.
Export of operational data via Mod-bus Pyrocontrol
As an option, the Pyrocontrol boiler control unit can be
extended with the Mod-bus (PYR-SED) extension module.
This extension module enables the exchange of operating
data between the higher control unit (Modbus master) and
the Pyrocontrol control unit (Modbus slave) via a serial
interface (RS232).
Note: This module is optional and must be ordered
separately. Please refer to the export of Operational
data via Mod-bus Pyro control for details.
Switch on boiler
When touched, the color changes
(from light to dark)
Switch off boiler
When touched, a confirmation is
requested, and then the color
changes (from light to dark).
Lock screen / Unlock screen
When touched, a confirmation
is requested.
Open settings
Touching it opens Screen 4 to
enter settings.
Overview, wood-fired boiler
Touching it opens Screen 7.
Overview, additional boilers
Touching it opens Screen 8.
Important: Screen 8 is only available
with optional multiple-boiler systems.
An additional boiler can be manually
switched on or off, and automatic
operation can be selected. The
operating hours counter is located
in the centre left of the screen.
Soft touch key 1
Soft touch key 2
Soft touch key 3
Soft touch key 4
Soft touch key 7
Screen for Kob boiler
Soft touch key 8
Symbol
The soft touch keys in Screen 1
Operation