Technical data

Spec Sheet
ECOTRONIC Heating Control Unit
Module Extension, Data Transmission Lines
KÖB Holzfeuerungen GmbH, Flotzbachstr. 33, A-6922 Wolfurt, Tel. +43/5574/6770-0, Fax 65707, E-Mail: office@kob.cc
Subject to technical changes
4020-1
2008-02-01_E
Control Module with Extended Control System [Art. No. ECO-BM-00]
The ECOTRONIC is a decentralised microprocessor system in which various modules are connected to a data
transmission line (CAN-bus). A limited number of controllers (2-3 units) can be integrated in the control module cost-
effectively.
Includes:
- Control module in compact design instead of standard design
- Weather sensor QAC 31, uninstalled
Control System Module [Art. No. ECO-RM-00]
A control system module to accommodate external controllers (for heat consumers/additional heat generators). The
control buttons are integrated in the control module.
Includes:
- Control System Module in plastic casing (length: 325 mm; height: 195 mm; depth 75 mm)
- Weather sensor QAC 31, uninstalled
Control Module with Extended Keyboard [Art. No. ECO-13]
A control module with an additional row of buttons to operate a maximum of: 12 controllers (Pyromat-DYN)
13 controllers (Pyromat-ECO)
Data transmission line with plug, 10.0 m standard [Art. No. ECO-ZL-10,0]
Data transmission line with plug, 2.0 m [Art. No. ECO-ZL-2,0]
Data transmission line with plug, 5.0 m [Art. No. ECO-ZL-5,0]
Data transmission line with plug, 20.0 m [Art. No. ECO-ZL-20,0]
Data transmission line with plug, 40.0 m [Art. No. ECO-ZL-40,0]
Data transmission line with plug, 80.0 m [Art. No. ECO-ZL-80,0]
Data line with Y distributor [Art.-Nr. ECO-ZY-0,5]
The data transmission line connects the various modules (burner module, control module & control system module) to
the overall facility control system. The data transmission lines can be connected to one another (maximum of two lines).
The maximum overall length of the data transmission line must not exceed 100 m.
Note:
The sum of all CAN bus lines must not exceed 200 m.
Example of how to connect the CAN-BUS cables for the PYROMAT-ECO:
Operating
module
PC
Control
Module 1
Control
Module 2
>
F2F1 F4F3
<
>
F5 F6
KÖB
>
F7
-
OK
F8
+
Boiler module on
the
PYROMAT-ECO
Control Module 1-3 possible
Visualization with PC – for extra cost, please refer to Data
Sheet 4090