Technical data

Spec Sheet
PYROT Rotation Firing System
Mastercontrol
KÖB Holzfeuerungen GmbH, Flotzbachstr. 33, A-6922 Wolfurt, Tel. [phone], Fax 65707, E-Mail: [e-mail]
Subject to technical changes
6850-1
2007-08-13_E
Mastercontrol [Art. No. ECO-M1]
Mastercontrol improves the overall generation of heat by two biomass boilers (PYROT double-unit system), incl. the
control of a bivalent boiler (oil-fired boiler, gas-fired boiler or electric boiler) as a redundant unit and/or as a peak-load
boiler.
Function:
- Heat management system: optimum breakdown of the necessary heating capacity among the two biomass boilers
with the main load on the primary boiler and the remaining load on the secondary boiler, this being done by means of
output specification. The output specification is carried out in weather-guided fashion, depending on the desired
temperature set in a joint hydraulic switcher. Automatic change between the two boilers to guarantee even loading of
the boilers over a long operating period. (Example: weekly changeover)
- Loader system: If the fuel for the two biomass boilers is taken from a joint fuel storage unit, then the loader system is
controlled by the Mastercontrol system up to the fuel distribution.
- Data management system:
A complete package for transferring all the data to an external customer-provided IT-workplace for visualisation,
remote maintenance and archiving of operational data for the PYROT boiler system. Hardware, incl. modem and
software, are integrated in the Mastercontrol system. All the adjustable parameters can be changed from the external
IT-workplace.
Operation:
Operation is carried out either by means of a touch screen built into the control cabinet (extra charge for touch screen) or
by the monitor, keyboard and PC-mouse provided by the customer.
Includes:
- Switch cabinet, uninstalled; surface powder-coated in RAL 7035 (grey) texture
Designed in accordance with ÖVE/VDE guidelines, ready-wired on series terminals
Feed: 3 x 400V 50 Hz; control voltage 230V or 24V
- Freely programmable control system, CE-tested; battery-buffered programme and real-time clock
- Industrial PC
- Starttec for all loader system drives (3 x 400V) in accordance with the separate price items
- DVI-interface for a TFT monitor and USB-interface for keyboard, mouse and printer built into the cable lead-
through bar on the control cabinet.
- Floating output (error report)
In the door:
- 4-pin master switch
- Documentation, including bound circuit diagram, terminal connection plan with cable identification in document
sleeve
- Accumulator management system, 5 sensors (QA)
- 5 PT100 sensors, with dipping shell 1/2" x 280 mm
- Output specifications for both biomass boilers
- Output specifications for both biomass boilers for further processing in the lower-level boiler control systems via
serial interface
- Visualisation per modem
- Analogue modem in switch cabinet
- Windows operating system, pc-Anywhere remote-maintenance software and visualization/archiving software
installed and tested on an industrial PC
Screen images:
- Three-dimensional boiler cross-section with display fields
- Installation diagram, heat generation, with display fields
- Parameter table (with editing feature)
To be carried out by the customer:
- Electric connection from telephone line to modem
Touch Screen [Art. No. ECO-TSC]
The touch screen (15") is built into the door of the control cabinet and can be used to call up and change all the relevant
boiler and loader system parameters.