Technical data

Spec Sheet

PYROT Rotation Heating System

PYROT - Ecotronic

6800-3

2007-08-13_E

KÖB Holzfeuerungen GmbH, Flotzbachstr. 33, A-6922 Wolfurt, Tel. +43/5574/6770-0, Fax 65707, E-Mail: office@kob.cc

Subject to technical changes

Triggering System for external drive [Art. No. ECO-A10]

Function:

Starttec motor starter for optimised connection of an external conveyor drive or rotary valve without reversal. A CAN bus

is used to directly connect the motors to the gentle start-up system via the Ecotronic. Temperature-monitored and

protected against overloading. Its electronic circuit breakers are wear-free, even at high switching frequencies.

Comes with:

- Starttec completely integrated in control cabinet

- Parameter assignment for the drive function

- Input in the control cabinet for safety end switch on the maintenance cover

- Output in the control cabinet for external conveyor drive

To be carried out by the customer:

- Delivery and/or installation of safety end switch for the external conveyor drive

Note: Only for PYROT. Starttec is built into the control cabinet for the boiler plant.

Only possible with defined, limited material feed facility (upstream conveyor auger)

Triggering System for external drive with light barrier [Art. No. ECO-A11]

Function:

Starttec motor starter for optimised connection of an external conveyor drive without reversal. A CAN bus is used to

directly connect the motors to the gentle start-up system via the Ecotronic. Temperature-monitored and protected against

overloading. Its electronic circuit breakers are wear-free, even at high switching frequencies. Additional protection of the

external drive through level-monitoring system of the further feed system by means of light barrier. The light barrier

connects directly to the Starttec for the continuing feed system, affecting the extraction system.