Technical data

Triggering System for external drive [Art. No. ECO-A10]
Function:
Starttec motor starter for optimized connection of an external conveyor drive or rotary valve without reversal. A CAN bus
is used to directly connect the motors to the gentle start-up system via the Ecotronic. Temperature-monitored and
protected against overloading. Its electronic circuit breakers are wear-free, even at high switching frequencies.
Comes with:
- Starttec completely integrated in control cabinet
- Parameter assignment for the drive function
- Input in the control cabinet for safety end switch on the maintenance cover
- Output in the control cabinet for external conveyor drive
To be carried out by the customer:
- Delivery and/or installation of safety end switch for the external conveyor drive
-
Note: Only for PYROT. Starttec is built into the control cabinet for the boiler plant.
Only possible with defined, limited material feed facility (upstream conveyor auger)
Triggering System for external drive with light barrier [Art. No. ECO-A11]
Function:
Starttec motor starter for optimized connection of an external conveyor drive without reversal. A CAN bus is used to
directly connect the motors to the gentle start-up system via the Ecotronic. Temperature-monitored and protected against
overloading. Its electronic circuit breakers are wear-free, even at high switching frequencies. Additional protection of the
external drive through level-monitoring system of the further feed system by means of light barrier. The light barrier
connects directly to the Starttec for the continuing feed system, affecting the extraction system.
Comes with:
- Starttec completely integrated in control cabinet
- Parameter assignment for the drive function
- Input in the control cabinet for safety end switch on the maintenance cover
- Output in the control cabinet for external conveyor drive
- Infrared light barrier, level-monitoring system for fuel
To be carried out by the customer:
- Delivery and/or installation of safety end switch for the external conveyor drive
Note: Only for PYROT. Starttec is built into the control cabinet for the boiler plant.
Spec Sheet
Pyrot Rotation Heating System
Pyrot - Vitocontrol
vIESmAnn
6800-3