Instructions

6
4. Anschluss
Vorsicht:
Widerstand und Diode an den Enden der Anschlussdrähte
sind für die Funktion erforderlich. Keinesfalls entfernen! Wi-
derstand und Diode nicht mit Isolationsmaterial umhüllen, da
sonst keine ausreichende Kühlung möglich ist!
Schließen Sie die Weichenlaterne an den Lichtausgang ei-
nes Modellbahntransformators (z. B. Art. 5200) an (Abb. 5).
Zum Anschluss des Universalantriebs Art. 4560 beachten
Sie bitte dessen Anleitung.
Zum einfachen Ein- und Ausschalten der Weichenlaterne,
verwenden Sie einen Schalter (z. B. Art. 5550).
Gleichspannung: Verbinden Sie die Diode mit dem Plus-Pol
des Netzteils, den Widerstand mit dem Minus-Pol.
Wechselspannung: Bei Betrieb mit Wechselspannung
kann es zu leichtem Flackern kommen. Daher empfeh-
len wir den Betrieb mit dem Viessmann Powermodul
Art. 5215 (Abb. 6). Ein Powermodul ist ausreichend für
ca. 100 LED-Leuchten oder -Strahler. Verbinden Sie das
Anschlusskabel mit der Diode mit der braunen Anschluss-
buchse, das Anschlusskabel mit dem Widerstand mit der
roten Anschlussbuchse.
4. Connection
Caution:
Resistor and diode at the cables are needed for proper
function of the lamp. Never cut them off! Never cover
resistor or diode with insulation material, because they
have to be cooled by surrounding air!
Connect the switchpoint light to the AC output of your
model train transformer (e. g. item 5200 – g. 5).
Please refer to the manual of item 4560 regarding the
connection.
Simply use an ordinary switch such as item 5550 for
switching the lighting of the switchpoint light.
DC voltage: Connect the diode with the positive pole of
the transformer and the resistor with the negative pole.
AC voltage: During operation with AC voltage it may
icker slightly. We recommend to use the Viessmann
power module item 5215 (g. 6) which is sucient
for ca. 100 LEDs or reectors. Connect the cable with the
diode to the brown output socket and the resistor to the
red output socket.
Fig. 5
Abb. 5
Sekundär
0-10-16 V~
16 V
Primär
230 V~
Gefertigt nach
VDE 0570
EN 61558
Lichttransformator
5200
Nur für trockene Räume
Primär 230 V 50 - 60 Hz
Sekundär max. 3,25 A52 VA
ta 25°CIP 40
10 V
0 V
z. B. / e. g. 5200
z. B. / e. g. 5550
viessmann
5550
Universal Ein-Aus-Umschalter
gelb / yellow
braun
braun
grün / green
brown
brown
Sekundär
0-10-16 V~
16 V
Primär
230 V~
Gefertigt nach
VDE 0570
EN 61558
Lichttransformator
5200
Nur für trockene Räume
Primär 230 V 50 - 60 Hz
Sekundär max. 3,25 A52 VA
ta 25°CIP 40
10 V
0 V
z. B. / e. g. 5200
z. B. / e. g. 5550
viessmann
5550
Universal Ein-Aus-Umschalter
gelb / yellow
braun
braun
grün / green
brown
brown
Fig. 6
Abb. 6
Sekundär
0-10-16 V~
16 V
Primär
230 V~
Gefertigt nach
VDE 0570
EN 61558
Lichttransformator
5200
Nur für trockene Räume
Primär 230 V 50 - 60 Hz
Sekundär max. 3,25 A52 VA
ta 25°CIP 40
10 V
0 V
z. B. / e. g. 5200
viessmann
5550
Universal Ein-Aus-Umschalter
gelb / yellow
braun
braun
viessmann
Powermodul
5215
T
E
ge bn
Braune Massebuchsen
nicht koppeln !
max. 24 V~
rt bn
zu den Decodern
grün / green
brown
brown
z. B. / e. g. 5550
z. B. / e. g. 5215