Manual

Viega IM-PFMB 1007
18
7. When attaching the distribution line
tubing to the 2 x 4 supports, be
sure to use appropriately-sized
Viega tubing clamps (For example,
use stock code 52 000 for 3/8"
tubing and stock code 52 020
for 1/2" tubing).
Use one clamp per tube to ensure
that the tubing is held securely.
Clamps shall be positioned NO
FURTHER than six (6) inches from
the end of the port. DO NOT pull
tubing tight. Leave at least 7" of
slack per 50' of tubing run.