Install Instructions
IM-MP 724992 0117
19
4 Warranty
VIEGA MEGAPRESS LIMITED WARRANTY
Subject to the conditions and limitations in this
Limited Warranty, Viega LLC (Viega) warrants to
end users, installers, and distribution houses that
its Viega MegaPress metal press ttings (Viega
Product) with application appropriate sealing
element when properly installed in non-industrial
and non-marine applications and under normal
conditions of use shall be free from failure caused
by manufacturing defects for a period of ten (10)
years from date of installation in Viega MegaPress
Approved Applications for uids/water, oil and
lubricant, and gases under Viega specied system
operating conditions.
Under this Limited Warranty, you only have a right
to a remedy if the failure or leak resulted from a
manufacturing defect in the Viega Product and the
failure or leak occurs during the warranty period.
You do not have a remedy under this warranty and
the warranty remedy does not apply if the failure or
any resulting damage is caused by (1) components
other than those manufactured or sold by Viega,
such as black iron pipe; (2) not designing,
installing, inspecting, testing, or maintaining
the Viega Product in accordance with Viega’s
installation and product instructions in effect at
the time of installation and other specications
and approvals applicable to the installation; (3)
use of Viega Product under non recommended
system operating conditions, improper handling
and protection of the Viega Product prior to, during
and after installation, inadequate freeze protection,
or exposure to environmental conditions not
recommended for the application; or (4) acts of
nature, such as, but not limited to, earthquakes,
re, or weather damage. In the event of a leak
or other failure of the Viega Product covered by
this warranty, it is the responsibility of the end
user to take appropriate measures to mitigate any
damage, to include making timely repairs. Only if
the warranty applies will Viega be responsible for
the remedy under this warranty. The part or parts
which you claim failed should be kept and Viega
contacted by writing to the address on the back
cover of this installation manual or telephoning
1-800-976-9819 within thirty (30) calendar days
after the leak or other failure and identifying
yourself as having a warranty claim. You should
be prepared to ship, at your expense, the product
which you claim failed due to a manufacturing
defect, document the date of installation, and the
amount of the repair or replacement if performed
by you. Within a reasonable time after receiving
the product, Viega will investigate the reasons for
the failure, which includes the right to inspect the
product at a Viega location and reasonable access
to the site of damage.
Viega will notify you in writing
as to the results of its review.
In the event that Viega determines that the failure
or leak was the result of a manufacturing defect
in the Viega Product covered by this warranty
and this warranty applies, the EXCLUSIVE
AND ONLY REMEDY under this warranty shall
be the reimbursement for reasonable charges
for repair or replacement of the Viega Product
itself. VIEGA SHALL NOT BE LIABLE FOR ANY
CONSEQUENTIAL OR OTHER DAMAGE (FOR
EXAMPLE, ECONOMIC LOSS, WATER OR
PROPERTY OR MOLD REMEDIATION) UNDER
ANY LEGAL THEORY AND WHETHER ASSERTED
BY DIRECT ACTION, FOR CONTRIBUTION OR
INDEMNITY OR OTHERWISE.
THE ABOVE WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE OR ANY
STATUTE OF LIMITATIONS RELATING TO SUCH
WARRANTIES. Other than this Limited Warranty,
Viega does not authorize any person or rm to
create for it any other obligation or liability in
connection with its products.
This Limited Warranty gives you specic legal
rights and you also may have other rights which
may vary from state to state. This warranty shall be
interpreted and applied under the law of the state
in which the product is installed and is intended as
a COMMERCIAL WARRANTY.