Submittal Sheet

3 of 13
Viega... The global leader in plumbing, heating and pipe joining systems
301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: [phone] • www.viega.com
©2011, ProPress
®
, FostaPEX
®
, Seapress
®
, MegaPress
®
, MegaPressG
®
and Viega
®
are registered trademarks of Viega GmbH & Co. PureFlow
®
, Smart Connect
®
, Climate Panel
®
, Climate Mat
®
, Climate
Trak
®
, MANABLOC
®
, Radiant Wizard
®
, S-no-Ice
®
, Snap Panel
®
, XL
®
and XL-C
®
are registered trademarks of Viega LLC. MiniBloc
™
, ProRadiant
™
, PolyAlloy
™
, Poly PEX Press
™
, SmartLoop
™
and Zero
Lead
™
are trademarks of Viega LLC; GeoFusion
™
, ProPressG
™
and ViegaPEX
™
are trademarks of Viega GmbH & Co. KG.
SM-PFNG-1111
Submittal
Package
Viega PEX Press Zero Lead Fittings with Attached Sleeves
For Use with Viega PureFlow Tubing
ViegaPEX and ViegaPEX UltraTubing
Material.......................................PEX crosslinked polyethylene
Temperature/Pressure Ratings... 200°F at 80 psi
180°F at 100 psi
73.4°F at 160 psi
Linear Expansion Rate................1.1 in./100 ft./10°F
Nominal Size Inner Diameter Outer Diameter Wall Thickness
3/8" 0.350 0.500±.003 0.070±.010
1/2" 0.475 0.625±.004 0.070±.010
3/4" 0.671 0.875±.004 0.097±.010
1" 0.863 1.125±.005 0.125±.013
1-1/4" 1.053 1.375±.005 0.153±.015
1-1/2" 1.243 1.625±.006 0.181±.019
2" 1.629 2.125±.006 0.236±.024
NOTE: Dimensions are in English units. Tolerences shown are ASTM requirements.
ViegaPEX and ViegaPEX Ultra are manufactures within these specications.
FostaPEX Tubing
Material.......................................PEX crosslinked polyethylene with aluminum and PE outer layers
Temperature/Pressure Ratings... 200°F at 80 psi
180°F at 100 psi
73.4°F at 160 psi
Linear Expansion Rate................0.16 in./100 ft./10°F
Nominal Size Inner Diameter Outer Diameter Wall Thickness
1/2” 0.475 0.625±.004 0.070±.010
3/4” 0.671 0.875±.004 0.097±.010
1” 0.863 1.125±.005 0.125±.013
NOTE: Dimensions are in English units. Tolerences shown are ASTM requirements.
FostaPEX is manufactures within these specications. (These dimensions do not
reect the outer aluminum and PE layers.)