Submittal Sheet

2 of 13
Viega... The global leader in plumbing, heating and pipe joining systems
301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: [phone] • www.viega.com
©2011, ProPress
®
, FostaPEX
®
, Seapress
®
, MegaPress
®
, MegaPressG
®
and Viega
®
are registered trademarks of Viega GmbH & Co. PureFlow
®
, Smart Connect
®
, Climate Panel
®
, Climate Mat
®
, Climate
Trak
®
, MANABLOC
®
, Radiant Wizard
®
, S-no-Ice
®
, Snap Panel
®
, XL
®
and XL-C
®
are registered trademarks of Viega LLC. MiniBloc
™
, ProRadiant
™
, PolyAlloy
™
, Poly PEX Press
™
, SmartLoop
™
and Zero
Lead
™
are trademarks of Viega LLC; GeoFusion
™
, ProPressG
™
and ViegaPEX
™
are trademarks of Viega GmbH & Co. KG.
SM-PFNG-1111
Submittal
Package
Viega PEX Press Zero Lead Fittings with Attached Sleeves
For Use with Viega PureFlow Tubing
Technical Data
Materials:
Fittings Zero Lead Bronze alloy
Press Sleeves 304 Stainless Steel
MANABLOC Manifolds Zero Lead Bronze alloy Fittings
ViegaPEX, ViegaPEX Ultra Tubing PEX (crosslinked polyethylene)
FostaPEX Tubing PEX base tubing with aluminum and PE outer layers
Applications
Zero Lead Bronze alloy ttings are intended
for use in potable water systems, heating or
snow melting applications and residential
re sprinkler systems meeting the NFPA
13D.* Zero Lead Bronze is dezincication
resistant, resists aggressive water
conditions and can be directly buried in soil
(ttings used for repairs in concrete should
be wrapped). These ttings with attached
sleeves incorporate a color-coded tool
locator ring that matches Viega’s hand PEX
Press tool colors. Fittings are manufactured
with PureFlow PEX Press barbs for use
with ViegaPEX, ViegaPEX Ultra, FostaPEX,
ViegaPEX Barrier tubing and tools.
Installation
• Use only PureFlow tubing and approved
tools to make connections
• Keep ame and excessive heat away
from tubing and connections.
• Refer to the PureFlow Installation Manual
for additional information.
ZERO LEAD identies Viega products
meeting the lead free requirements of
California and Vermont law, effective
January 1, 2010, as tested and listed
against NSF- 61, Annex G
* ViegaPEX Ultra Black in 3/4” through 2” sizes only.
THREE SIMPLE STEPS TO A SECURE PEX PRESS PUREFLOW
FITTING CONNECTION.
1 INSERT PEX PRESS FITTING WITH ATTACHED SLEEVE INTO
TUBING AND ENGAGE FULLY. TUBING SHOULD BE VISIBLE
THROUGH VIEW HOLES.
2 POSITION PRESS TOOL PERPENDICULAR OVER PRESS
SLEEVE AND CLOSE TOOL JAWS TO ENGAGE RATCHET.
3 CLOSE HANDLES, USING TRIGGER TO REDUCE GRIP SPAN
IF DESIRED.
Note: Use of a Viega power tool is required for making 1-1/4” and
larger connections, refer to the current PureFlow water systems
installation manual for additional pressing information.
UL 1821*
cNSF® us-pw-G
CSA B137.5
U.P. Code
ASTM F876 / F877
ICC ES-PMG™ 1015/1038
Codes Approvals & Standards
90°