Install Instructions
Table Of Contents
- ProPress stainless approved fluids
- ProPress stainless approved gases
- Dimensional data
- ½" Stainless Steel, ASTM A312 flow rate, velocity, loss
- ¾" Stainless Steel, ASTM A312 flow rate, velocity, loss
- 1" Stainless Steel, ASTM A312 flow rate, velocity, loss
- 1¼" Stainless Steel, ASTM A312 flow rate, velocity, loss
- 1½" Stainless Steel, ASTM A312 flow rate, velocity, loss
- 2" Stainless Steel, ASTM A312 flow rate, velocity, loss
- 2½" Stainless Steel, ASTM A554 flow rate, velocity, loss
- 3" Stainless Steel, ASTM A554 flow rate, velocity, loss
- 4" Stainless Steel, ASTM A554 flow rate, velocity, loss
- Fitting friction loss equivalent length of tube (feet)
- MSS SP-58 or the maximum spacing and minimum rod sizes
- Minimum distance between press fittings
- ProPress standard jaws clearance requirements
- ProPress standard jaws clearance requirements between tube, wall, and floor
- ProPress compact jaws clearance requirements
- ProPress compact jaws clearance requirements between tube, wall, and floor
- ProPress rings dimensions
- ProPress rings with V1 actuator clearance requirements
- ProPress rings with V2 actuator clearance requirements
- ProPress rings with V1 actuator clearance requirements between tube, wall, and floor
- ProPress rings with V2 actuator clearance requirements between tube, wall, and floor
- ProPress rings with C1 actuator clearance requirements between tube, wall, and floor
- ProPress XL-C rings dimensions
- ProPress XL-C rings clearance requirements
- ProPress XL-C rings clearance requirements between tube, wall, and floor
- Minimum distance between existing soldered or brazed fitting and ProPress fitting
- Minimum distance between soldered fitting and ProPress fitting
- Minimum insertion depths for ProPress Stainless ½" to 2"
- Insertion depths for ProPress Stainless ½" to 2" no-stop couplings
- Minimum insertion depths ProPress Stainless 2½" to 4"
- Insertion depths for ProPress Stainless 2½" to 4" no-stop couplings
- About this Document
- Disclaimer
- Product Information
- Handling Instructions
- Installation Instructions
- Limited warranty
Product Information
31 of 56
IM-PP 599834 0320 ProPress Stainless
2.6.2 Fitting Friction Loss
Fitting Size
(inches)
90° elbow
(long radius)
45° elbow
tee (straight
ow)
tee (branch
outlet)
ball valve
(full port)
½ 0.66 0.66 0.82 2.46 6.15
¾ 0.99 0.99 1.24 3.72 9.30
1 1.33 1.33 1.66 4.98 12.45
1¼ 1.65 1.65 2.06 6.18 15.45
1½ 1.98 1.98 2.48 7.44 18.60
2 2.66 2.66 3.32 9.96 24.90
2½ 3.30 3.30 4.12 12.36 NA
3 3.97 3.97 4.96 14.88 NA
4 5.30 5.30 6.62 19.86 NA
Table 13: Fitting friction loss equivalent length of tube (feet)
2.6.3 Maximum Span/Minimum Rod Diameter
Nominal Tube Size
(inches)
Stainless Steel Pipe
Maximum Span (feet)
Minimum Rod Diameter
(inches)
½ 10 ⅜
¾ 10 ⅜
1 10 ⅜
1¼ 10 ⅜
1½ 10 ⅜
2 10 ⅜
2½ 11 ½
3 12 ½
4 14 ⅝
Table 14: MSS SP-58 or the maximum spacing and minimum rod sizes