Install Instructions
Table Of Contents
- ProPress stainless approved fluids
- ProPress stainless approved gases
- Dimensional data
- ½" Stainless Steel, ASTM A312 flow rate, velocity, loss
- ¾" Stainless Steel, ASTM A312 flow rate, velocity, loss
- 1" Stainless Steel, ASTM A312 flow rate, velocity, loss
- 1¼" Stainless Steel, ASTM A312 flow rate, velocity, loss
- 1½" Stainless Steel, ASTM A312 flow rate, velocity, loss
- 2" Stainless Steel, ASTM A312 flow rate, velocity, loss
- 2½" Stainless Steel, ASTM A554 flow rate, velocity, loss
- 3" Stainless Steel, ASTM A554 flow rate, velocity, loss
- 4" Stainless Steel, ASTM A554 flow rate, velocity, loss
- Fitting friction loss equivalent length of tube (feet)
- MSS SP-58 or the maximum spacing and minimum rod sizes
- Minimum distance between press fittings
- ProPress standard jaws clearance requirements
- ProPress standard jaws clearance requirements between tube, wall, and floor
- ProPress compact jaws clearance requirements
- ProPress compact jaws clearance requirements between tube, wall, and floor
- ProPress rings dimensions
- ProPress rings with V1 actuator clearance requirements
- ProPress rings with V2 actuator clearance requirements
- ProPress rings with V1 actuator clearance requirements between tube, wall, and floor
- ProPress rings with V2 actuator clearance requirements between tube, wall, and floor
- ProPress rings with C1 actuator clearance requirements between tube, wall, and floor
- ProPress XL-C rings dimensions
- ProPress XL-C rings clearance requirements
- ProPress XL-C rings clearance requirements between tube, wall, and floor
- Minimum distance between existing soldered or brazed fitting and ProPress fitting
- Minimum distance between soldered fitting and ProPress fitting
- Minimum insertion depths for ProPress Stainless ½" to 2"
- Insertion depths for ProPress Stainless ½" to 2" no-stop couplings
- Minimum insertion depths ProPress Stainless 2½" to 4"
- Insertion depths for ProPress Stainless 2½" to 4" no-stop couplings
- About this Document
- Disclaimer
- Product Information
- Handling Instructions
- Installation Instructions
- Limited warranty
Product Information
8 of 56
IM-PP 599834 0320 ProPress Stainless
Please read and understand the instructions before beginning installation
to eliminate safety concerns and reduce risks associated with use and
handling of Viega products.
Viega ProPress systems are state-of-the-art press tting systems
that provide economical and reliable installations for the commercial,
industrial, and residential markets.
Viega ProPress 304 FKM and ProPress 316 are stainless steel tube,
ttings, and valves in copper tube size (CTS) ranging from ½ inch to 4
inches. The ttings require no brazing, threading, or welding and are
installed with electro-hydraulic press tools (battery-powered or corded
press tools).
Viega ProPress 304 FKM ttings feature a white dot representing Smart
Connect
®
technology with an FKM sealing element. Viega ProPress 316
ttings feature a green dot that represents Smart Connect technology
with an EPDM sealing element. Viega’s unique Smart Connect technology
helps installers ensure that they have pressed all connections.
Viega ProPress 304 FKM and ProPress 316 2½" to 4" ttings feature a
stainless steel grip ring and PBT separator ring.
Stainless tubing is thicker than Schedule 5 inert gas
welded pipes, meeting ASTM A312, A554 wall thickness
requirements.
All tube diameters are delivered in nominal 20 foot lengths, with a metallic
bare exterior and interior surface. The tubes are free from annealing color
and corrosion-promoting substances.
Only ProPress stainless steel tubing is approved for
installation with ProPress stainless ttings. This ensures
reliability and conformity with the stainless steel system.
2 Product Information
2.1 ProPress 304 FKM and 316 Systems
2.2 Safety