Install Instructions

Handling Instructions
32 of 56
IM-PP 599834 0320 ProPress Stainless
All Viega ProPress Stainless components and associated tubing shall be free
from dirt, debris, or items that may interfere with the sealing element and
the press connection. Viega ProPress Stainless sealing elements, separator
rings, and grip rings are to be visually inspected prior to installation to ensure
the seal is intact and properly located within the 󶈵tting.
3 Handling Instructions
3.1 Transport
When transporting 󶈵ttings:
■ Do not pull or drag the 󶈵ttings or system components along other
surfaces.
■ Secure 󶈵ttings, tube, and system components during transportation to
keep them from shifting.
■ Do not damage the protective cap on the components or tube ends.
■ Do not remove protective caps until immediately before installing.
3.2 Storage
When storing materials:
■ Store 󶈵ttings, tube, and system components in a clean and dry place.
■ Fittings must be clean and free of debris when pressing.
Use only water when cleaning.
■ Do not store components directly on the 󶈶oor.
■ Provide at least three points of support for the storage of tube.
■ Where possible, store di󶈴erent sizes separately.
■ Store small sizes on top of larger sizes if separate storage is not
possible.
■ Store 󶈵ttings, tube, and system components of di󶈴erent materials
separately to prevent contact corrosion.