Submittal Sheet

Table Of Contents

Engineering Speci󶈵cations

7 of 24SM-PP 0520 ProPress Stainless

3 Engineering Speci󶈵cations

Part1:General

1.1Summary

Stainless steel pipe and fitting system using cold press connection technology. The system is assembled when the

pipe is fully inserted into the fitting, then pressed on both sides of the fitting seal, creating a mechanical joint.

1.2De󶈵nitions

ASME: American Society of Mechanical Engineers

ASTM: American Society for Testing and Materials

AWWA: American Water Works Association

EPDM: Ethylene Propylene Diene Monomer

FKM: Fluoroelastomer

IAPMO: International Association of Plumbing & Mechanical Officials

ICC: International Code Council

MSS: Manufacturers Standardization Society

NFPA: National Fire Protection Association

NSF: National Sanitation Foundation

1.3References

ASME A13.1: Scheme for the Identification of Piping Systems

ASME B1.20 Pipe Threads, General Purpose (Inch)

ASME B31.1 Power Piping

ASME B31.3 Process Piping

ASME B31.9 Building Services Piping

ASTM A312 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

ASTM A554 Standard Specification For Welded Stainless Steel Mechanical Tubing

AWWA C651 Standard for Disinfecting Water Mains

IAPMO Uniform Mechanical Code

IAPMO Uniform Plumbing Code

ICC International Plumbing Code

ICC International Mechanical Code

MSS-SP-58 Pipe Hangers and Supports - Materials, Design and Manufacture

NFPA 13 Standard for the Installation of Sprinkler Systems (Approval Pending)

NFPA 13D Standard for the Installation of Sprinkler Systems in One- and Two-family Dwellings and Manufactured

Homes (Approval Pending)

NFPA 13R Standard for the Installation of Sprinkler Systems in Residential Occupancies Up to and Including Four

Stories in Height (Approval Pending)

NSF 61 Drinking Water System Components – Health Effects

1.4QualityAssurance

A. Installer shall be a qualified installer, licensed within the jurisdiction, and familiar with the installation of stainless

steel pipe.

B. The installation of stainless steel pipe for hot and cold water distribution systems shall conform to the

requirements of the ICC International Plumbing Code or IAPMO Uniform Plumbing Code. The installation of

stainless steel pipe in hydronic systems shall conform to the requirements of the ICC International Mechanical

Code or the IAPMO Uniform Mechanical Code.

ProPressStainless