Submittal Sheet

P.O. Box 130140, Ann Arbor, MI 48113-0140 USA
NSF International
December 16, 2009
VIEGA LLC.
301 NORTH MAIN STREET File: 72320/72321/72322
SUITE 900 WICHITA, KS 67202
ATTN: MR. ANDREW GRANZOW
Subject: Annex G Certification
Dear Mr. Granzow,
It is my pleasure to inform you that the potable water products identified under the following
Authorized Registered Formulations (ARFs) DCC #’s: PM10121 (Lead Free Pureflow PEX
Press Fittings – Continuous Cast) produced at your Grossheringen facility, PM10152 (Lead
Free ProPress Bronze Fittings – Continuous Cast) produced at your Grossheringen facility,
PM10241 (Lead Free ProPress Bronze Fittings – Sand Cast) produced at your Ennest facility,
and PM10242 (Lead Free Pureflow PEX Press Fittings – Sand Cast; Forged) produced at your
Ennest facility have successfully completed chemical extraction testing under the following job
#’s:
¾ J-00080134 – this authorized PM10121 and PM10152
¾ J-00080135 – this authorized PM10241
¾ J-00080133 – this authorized PM10242
The above mentioned product lines will be placed into Official Listing by next week and they
will also contain the following Annex G footnote:
[G] Product also Certified to NSF/ANSI Standard 61, Annex G (weighted average lead
content of <=0.25%) and is in compliance with California's Health & Safety Code Section
116875 (commonly known as AB1953) and Vermont Act 193.
If you should have any questions in the meantime, please do not hesitate to contact me directly.
Sincerely,
Suzan Somo
Certification Project Manager Phone: [phone]
Plastic Piping System Components Fax: [phone]
Water Distribution Systems E-mail: [e-mail]
734-769-8010 | 1-800-NSF-MARK | Fax : [phone]
E-Mail : [e-mail] | Web : http://www.nsf.org
Page 1 of 1