Install Instructions
Table Of Contents
- About this Document
- Disclaimers
- Product Information
- Viega Manifolds
- Viega PureFlow Tubing
- Viega PureFlow Fittings
- Viega PureFlow System Design Considerations
- Water Service Installation
- Installing the ManaBloc
- Mounting the ManaBloc
- Installing Manifold Distribution Lines
- Installing the Viega PureFlow PEX Tubing System
- Fastening the Viega PureFlow System
- Installing Viega PureFlow Fittings
- Pressure Testing Viega PureFlow Systems
- System Disinfection
- Installer Checklist
- Limited Warranty
Limited Warranty
86 of 88
IM-PF 724596 1021 PureFlow Water System (EN)
systems sold by Viega are not Viega Pureow PEX tubing or approved
connections sold by Viega.
Connection to non-Viega plumbing products intended for riser and/or water
service applications does not void the system warranty provided all pipe,
ttings, valves, and manifolds are sold by Viega after the transition location.
Termination connections to non-Viega end-use devices or equipment
such as ltration, water softeners, shower valves, faucets, stops, and
other such devices, when utilizing Viega PureFlow PEX does not void the
system warranty as described.
Under this limited warranty, you only have a right to reimbursement if the
failure or leak or resulting damage resulted from a manufacturing defect in
the products covered by this warranty and the failure or leak or resulting
damage occurred during the warranty period. You do not have a remedy
or right of reimbursement under this warranty and the warranty does not
apply if the failure or leak or resulting damage is caused by (1) components
in the plumbing system other than those manufactured or sold by Viega;
(2) not designing, installing, inspecting, testing, or operating the system
in accordance with Viega’s installation instructions at the time of the
installation, applicable code requirements, and good plumbing practices;
(3) improper handling and protection of the product prior to and during
installation, exposure to ultra violet light, inadequate freeze protection,
exposure to water pressures or temperatures in excess of the limitations on
the tubing, or application of unauthorized or harmful solvents or chemicals;
(4) chemically corrosive or aggressive water conditions; or (5) acts of nature
such as earthquakes, re, ood, or lightning.
In the event of a failure or leak in the system, it is the responsibility of the
property owner to obtain and pay for repairs. Only if the warranty applies
will Viega be responsible for reimbursement under this warranty. The
part or parts which you claim failed should be kept and Viega contacted
at the address below or by telephoning 800-976-9819 within thirty (30)
days after the failure or leak and identifying yourself as having a warranty
claim. You should be prepared to ship, at your expense, the product
which you claim failed due to a manufacturing defect, document the date
of installation, and the amount of any claimed bills for which you seek
reimbursement. Within a reasonable time after receiving the product,
Viega will investigate the reasons for the failure, which includes the right
to inspect the product at Viega and reasonable access to the site of
damage in order to determine whether the warranty applies. Viega will
notify you of the results of this review.
In the event that Viega determines that the failure or leak and any
resulting damages were the result of a manufacturing defect in the
products covered by the 10-year or 25-year limited warranties and
occurred during the rst ten (10) years covered by this warranty, Viega
will reimburse the property owner for reasonable repair or replacement
charges to include drywall, ooring, and painting costs, as well as
damages to personal property, resulting from the failure or leak. The
remaining 15-year limited warranty for products covered by the 25-year