Install Instructions

Product Instructions
MANABLOC
®
Access Panel Installation
Viega... The global leader of plumbing and heating systems.
301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: [phone] • E-Mail: [e-mail] • www.viega.com
PI-PF-50718-0909
The MANABLOC access panel is ideal for use with many plumbing applications like the MANABLOC® Manifold
control unit or easy access to tub and shower valves, re sprinkler valves or radiant heating manifolds.
The MANABLOC access panel access door installs in minutes. Attractive center panel removes to ensure full
access. MANABLOC access panel is designed to t between 16” on center framing.
Assembly instructions:
Use model # and chart below to determine proper size cut out.1.
At desired location, cut and remove section of dry wall (Fig. 1).2.
With panel removed, place frame into opening with small slots at bottom and frame resting on bottom 3.
of opening.
Lift frame up 1/4" and use provided hardware to secure frame to studs being careful not to overtighten (Fig. 2).4.
Insert top edge of removable panel into the upper frame slot, then while pushing the panel in, lower into bottom 5.
slots of frame. (Reverse sequence for removal.)
NOTE: If other than 16" on-center framing, appropriate anchors will be needed.
FIG. 1
FIG. 2
• Panel
insertion
slots
Stock Code Old Part No. Dimensions Cut out Outside
50718 (MPD-18) 14" x 18" 14-3/8" x 19-3/4" 16-1/2" x 21-1/4"
50726 (MPD-26) 14" x 26" 14-3/8" x 27-3/4" 16-1/2" x 29-1/4"
50730 (MPD-30) 14" x 30" 14-3/8" x 31-3/4" 16-1/2" x 33-1/4"
50739 (MPD-39) 14" x 39" 14-3/8" x 40-3/4" 16-1/2" x 42-1/4"