Crimp PolyAlloy Submittal

SM-PF 1015 (PolyAlloy Crimp)
2 of 8
Submittal
Package
Viega LLC, 100 N. Broadway, 6
th
Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: [phone]
ANSI/NSF 61-G
cNSF
®
us pw-G
CSA B137.5
U.P. Code
UPC
®
ASTM F876 / F877
ASTM F1807 / F2159
ICC ES-PMG™ 1038
Technical Data
Materials:
Fittings................................................................. PolyAlloy (Acudel
®
and Radel-R
®
)
Crimp Rings......................................................... Copper (black)
MANABLOC Manifolds...................................... Polysulfone (plastic) PolyAlloy ttings
PEX Crimp Poly Manifolds................................... PolyAlloy crimp connections
Valves................................................................... PolyAlloy
ViegaPEX, ViegaPEX Ultra Tubing........................PEX (crosslinked polyethylene)
Applications
Viega PEX Crimp zero lead brass
and Polyalloy PEX Crimp ttings are
intended for use in potable water
systems. They can be directly buried
in soil but shall be wrapped (ttings
used in concrete shall also be
wrapped). Fittings are manufactured
with Viega PEX Crimp barbs for
use with ViegaPEX, ViegaPEX Ultra
tubing, crimp rings and tools.
Installation
• Use only ASTM F1807 crimp rings
and approved full circle crimp
tools to make connections.
• Keep ame and excessive heat
away from tubing and connections.
• Refer to the Viega PEX Installation
Manual for additional information.
“Zero Lead” identies Viega
®
products meeting the lead free
requirements of NSF 61-G through
testing under NSF/ANSI 372 (0.25%
or less maximum weighted average
lead content).
THREE SIMPLE STEPS TO A SECURE VIEGA
PEX CRIMP FITTING CONNECTION.
1. SLIDE CRIMP RING OVER END OF SQUARED OFF TUBING,
FULLY INSERT FITTING INTO TUBING AND POSITION THE
RING ⅛" TO ¼" FROM THE END OF TUBING.
2. KEEP THE TOOL AT 90° AND CLOSE THE HANDLES
COMPLETELTY. DO NOT CRIMP TWICE.
3. CHECK CRIMP WITH GO/ NO GO GAUGE.
Codes Approvals & Standards
90°
1
/
8
” to ¼”
Viega
®
PEX Crimp PolyAlloy
™
Fittings