Install Instructions
Table Of Contents
- About this Document
- Disclaimers
- Product Information
- Viega Manifolds
- Viega PureFlow Tubing
- Viega PureFlow Fittings
- Viega PureFlow System Design Considerations
- Water Service Installation
- Installing the ManaBloc
- Mounting the ManaBloc
- Installing Manifold Distribution Lines
- Installing the Viega PureFlow PEX Tubing System
- Fastening the Viega PureFlow System
- Installing Viega PureFlow Fittings
- Pressure Testing Viega PureFlow Systems
- System Disinfection
- Installer Checklist
- Limited Warranty
About this Document
8 of 88
IM-PF 724596 1021 PureFlow Water System (EN)
DANGER!
This symbol warns of possible life-threatening injury.
WARNING!
This symbol warns of possible serious injury.
CAUTION!
This symbol warns of possible injury.
NOTICE!
This symbol warns of possible damage to property.
Notes give additional helpful tips.
1.2 Symbols Used
The following symbols may be used within this document:
Do not expose Viega products to any foreign substance that
includes but is not limited to VOC (Volatile Organic Chemical)
compounds, paints, solvents, glues, cleaners, and disinfectants.
Viega products that are exposed to these types of substances
are at risk of having failures (leaks).
Limit direct UV exposure (sunlight) to products that have this
warning symbol present. Maximum UV exposure durations may
vary based on the type of product being installed. Review the
warning and/or limitation listed with the product being installed.
Hand-tighten only. Damage may result if over-tightened.