Press Polymer Submittal

3 of 11
Submittal
Package
SM-PF 1116 (PEX Press Polymer)
Viega LLC, 12303 Airport Way, Ste. 395 • Broomfield, CO 80021 • Ph: 800-976-9819 • Fax: [phone]
ViegaPEX Ultra Tubing
Material.......................................PEX crosslinked polyethylene
Temperature/Pressure Ratings... 200°F at 80 psi
180°F at 100 psi
73.4°F at 160 psi
Linear Expansion Rate................1.1 in./100 ft./10°F
Nominal Size Inner Diameter Outer Diameter Wall Thickness
⅜" 0.350 0.500±.003 0.070±.010
½" 0.475 0.625±.004 0.070±.010
¾" 0.671 0.875±.004 0.097±.010
1" 0.863 1.125±.005 0.125±.013
1¼" 1.053 1.375±.005 0.153±.015
1½" 1.243 1.625±.006 0.181±.019
2" 1.629 2.125±.006 0.236±.024
FostaPEX Tubing
Material.......................................PEX crosslinked polyethylene with aluminum and PE outer layers
Temperature/Pressure Ratings... 200°F at 80 psi
180°F at 100 psi
73.4°F at 160 psi
Linear Expansion Rate................0.16 in./100 ft./10°F
ID OD
Nominal Size Inner Diameter Outer Diameter Wall Thickness
½" 0.475 0.625±.004 0.070±.010
¾" 0.671 0.875±.004 0.097±.010
1" 0.863 1.125±.005 0.125±.013
NOTE: Dimensions are in English units. Tolerences shown are ASTM requirements.
FostaPEX is manufactures within these specications. (These dimensions do not reect
the outer aluminum and PE layers.)
Viega
®
PEX Press Polymer
Fittings for Use with Viega PEX Tubing