Install Instructions
Table Of Contents
- About this Document
- Disclaimers
- Product Information
- Viega Manifolds
- Viega PureFlow Tubing
- Viega PureFlow Fittings
- Viega PureFlow System Design Considerations
- Water Service Installation
- Installing the ManaBloc
- Mounting the ManaBloc
- Installing Manifold Distribution Lines
- Installing the Viega PureFlow PEX Tubing System
- Fastening the Viega PureFlow System
- Installing Viega PureFlow Fittings
- Pressure Testing Viega PureFlow Systems
- System Disinfection
- Installer Checklist
- Limited Warranty
Product Information
12 of 88
IM-PF 724596 1021 PureFlow Water System (EN)
Please read and understand the instructions before beginning installation
to eliminate safety concerns and reduce risks associated with use and
handling of Viega products.
2.5 Safety
Viega oers many tools to assist the specifying engineer, engineer, contractor,
and installer to ensure Viega PureFlow systems are properly designed and
installed. This can be done by referring to one of the resources listed below:
■ Engineering Specications are available at www.viega.us.
■ Viega guide specications in Master Spec format are available upon
request at 1(800) 976-9819.
■ Contact your local Viega eld sales representative.
Consult Viega’s Technical Services Department for information on applications
not listed or applications outside listed temperature and pressure ranges.
■ Viega Technical Services Department: Techsupport@viega.us
■ Design Service: For more information on re protection system design,
radiant system design, and plumbing design services: Design@viega.us
2.6 Design Services