2.
MegaPress Press-In Branch Connector 2.8 The MegaPress Press-In Branch Connector is an innovative way to create branches from main runs or install instrumentation onto existing piping. The branch connector installs onto carbon steel pipe in sizes 1½" through 4", as well as 6", and has a ¾" FPT outlet. As with other MegaPress products, it can be installed on partially drained systems, further reducing downtime during installation.
MegaPress Press-In Branch Connector Index 148 148 2.
2.8 Branch connectors iega MegaPress P V ress-In Branch Connector -- For use with Sch.10 carbon steel pipe only -- Carbon steel -- Press connection, female pipe thread Components FKM sealing element Model 4812.2 for d 1½ 2 2½ 3 4 6 FPT ¾ ¾ ¾ ¾ ¾ ¾ Wt [lb] 0.454 0.452 0.458 0.452 0.445 0.441 Quantity 1 1 1 1 1 1 Part No 26800 26805 26810 26815 26820 26825 DG 12 12 12 12 12 12 iega MegaPress P V ress-In Branch Connector -- For use with Sch.
Press-In B ranch Connector adapter HEX -- For use with drill chuck without SDS-plus handle -- Spare part for Press-In Branch Connector tool kit Model 4878.5 -- Steel Components Hex chuck Model 4812.28 Press-In B ranch Connector positioning guide -- Spare part for Press-In Branch Connector tool kit M odel 4878.5 -- Use with V iega MegaPress Press-In Branch Connector Model 4812.2 -- Stainless steel Model 4278.