Brochure

Viega LLC 1-800-976-9819 www.viega.us
19
Megapress Viega Limited Warranty
Subject to the conditions and limitations in this
Limited Warranty, Viega LLC (Viega) warrants
to end users, installers, and distribution houses
that its Viega MEGAPRESS metal press fittings
(Viega Product) with application appropriate
sealing element when properly installed shall
be free from failure caused by manufacturing
defects for a period of ten (10) years from date
of installation in Viega MEGAPRESS Approved
Applications for fluids/water, oil and lubricant,
and gases under Viega specified system
operating conditions.
Under this Limited Warranty, you only have a
right to a remedy if the failure or leak resulted
from a manufacturing defect in the Viega
Product and the failure or leak occurs during
the warranty period. You do not have a remedy
under this warranty and the warranty remedy
does not apply if the failure or any resulting
damage is caused by (1) components other
than those manufactured or sold by Viega,
such as black iron pipe; (2) not designing,
installing, inspecting, testing, or maintaining
the Viega Product in accordance with Viega’s
installation and product instructions in
effect at the time of installation and other
specifications and approvals applicable to the
installation; (3) use of Viega Product under non
recommended system operating conditions,
improper handling and protection of the Viega
Product prior to, during and after installation,
inadequate freeze protection, or exposure to
environmental conditions not recommended for
the application; or (4) acts of nature, such as,
but not limited to, earthquakes, fire, or weather
damage. In the event of a leak or other failure
of the Viega Product covered by this warranty,
it is the responsibility of the end user to take
appropriate measures to mitigate any damage,
to include making timely repairs. Only if the
warranty applies will Viega be responsible for
the remedy under this warranty. The part or
parts which you claim failed should be kept and
Viega contacted by writing to the address below
or telephoning 1-877-843-4362 within thirty
(30) calendar days after the leak or other failure
and identifying yourself as having a warranty
claim. You should be prepared to ship, at your
expense, the product which you claim failed
due to a manufacturing defect, document the
date of installation, and the amount of the repair
or replacement if performed by you. Within a
reasonable time after receiving the product,
Viega will investigate the reasons for the failure,
which includes the right to inspect the product
at a Viega location and reasonable access to the
site of damage. Viega will notify you in writing
as to the results of its review.
In the event that Viega determines that the
failure or leak was the result of a manufacturing
defect in the Viega Product covered by this
warranty and this warranty applies, the
EXCLUSIVE AND ONLY REMEDY under this
warranty shall be the reimbursement for
reasonable charges for repair or replacement
of the Viega Product itself. VIEGA SHALL NOT
BE LIABLE FOR ANY CONSEQUENTIAL OR
OTHER DAMAGE (FOR EXAMPLE, ECONOMIC
LOSS, WATER OR PROPERTY OR MOLD
REMEDIATION) UNDER ANY LEGAL THEORY AND
WHETHER ASSERTED BY DIRECT ACTION, FOR
CONTRIBUTION OR INDEMNITY OR OTHERWISE.
THE ABOVE WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE OR ANY
STATUTE OF LIMITATIONS RELATING TO SUCH
WARRANTIES. Other than this Limited Warranty,
Viega does not authorize any person or firm to
create for it any other obligation or liability in
connection with its products.
This Limited Warranty gives you specific legal
rights and you also may have other rights which
may vary from state to state. This warranty shall
be interpreted and applied under the law of the
state in which the product is installed and is
intended as a COMMERCIAL WARRANTY.
Viega MegaPress Systems