Install Instructions

IM-PR 566442 1114 (Design Manual)
178
Figure C-1j
Joist space section — heat transfer plate
Floor Joist
Foil Face or Radiant Barrier:
Keep a 1" to 2" air gap.
¾" Plywood Subfloor
8" Spacing (per design)
Heat Transfer Plate
R-19: Refer to local code for
insulation requirements.
Figure C-1k
Section through heat transfer plate installation with hardwood finish floor
Hardwood Flooring
NOTE:
Stop Heat Transfer Plate
12" to 16" before bend.
¾" Plywood Subfloor:
The thickness of the plywood
subfloor should always be
installed in accordance with the
local building code.
Floor Joist:
Be sure to check with local building
codes to ensure no structural damage
will occur due to drilling joists.
Tubing Spacing
(per design)
Heat Transfer Plate: 5"W x 19" L have a 1" gap
between Climate Traks, install 1½" off the joist
R-19 Insulation:
Use a Foil Face
or Radiant
Barrier to keep a
1" to 2" air gap
between the insulation
and the Traks. Refer to
local code for insulation
requirements.