Install Instructions

67
IM-PR 566442 1114 (Design Manual)
1.13 Minimum required design
information
(TECA 2009, Clause 2.9)
Room Identication and Room Heat Loss
(Btu / hr)
Floor Area and Total Usable Floor Area (ft
2
)
Btu / hr / ft
2
of Panel Area
Floor Covering R-Value or Adjustment
Factor *(See Note below)
System Design Temperature Drop
Radiant Floor Heating Supply Water
Temperature
Boiler Supply Water Temperature
Pipe Size, Maximum Spacing and Total
Length of Piping per Room
Minimum Number of Loops
Auxiliary Heat Required per Room
Active Element Length per Room
(Baseboard Systems)
Btu / LF Used to Calculate Baseboard
Active Length
Size and Output of Other Heat Emitters
Supply Water Temperature of all Heat
Emitter Systems
15
15. ©TECA. 2009. “Hydronic & Combo Guidelines” Clause 2.9