Install Instructions

183

IM-PR 566442 1114 (Design Manual)

C.4 Installation

Before you start the installation, ensure that you have the proper tools for the job.

1. Staple gun with swivel connected hose (staples

⁄

" to ½" crown by ¾" to 1")

2. Compressor (1.5-2 hp)

3. Radial arm chop saw - for cutting Traks

4. Right-angle drill with bit kit (1¼") - for drilling joists

5. Palm hammer (medium plastic hammer tip)

6. Screw gun (¾" to 1" tech screws)

7. Nail grinder (4½")

• Installation (Power Tools) •

1. Tape measure (recommended 1 per person)

2. Heavy-duty nail cutter - for cleaning joists

3. Rubber mallet - for snapping tubing into Climate Traks

4. Decoiler

5. Hammer - for bending nails, miscellaneous

6. Chalk line - for chalking joists for hole or plate placement

7. Wrench - for manifold connections

8. Tubing cutter

9. Utility knives - for deburring and opening boxes

10. Caulking gun

• Installation (Hand Tools) •

1. Safety glasses (highly recommended)

2. Earplugs

3. Rolling scaffolding or sheet-rocker stilts or ladders

4. Lights (especially in basement applications)

5. Broom

• Miscellaneous •