Install Instructions

171
IM-PR 566442 1114 (Design Manual)
Installation
Step 1. Snap Panel can be installed in any orientation. The illustrations above show Snap Panels
being installed in two different manners; either is correct. Snap Panel should be run in the direction
that creates less cutting waste.
Step 2. Offset Snap Panel seams to help lock the oor together and prevent shifting while installing the
ViegaPEX Barrier tubing. Use a utility knife to cut panels.
Step 3. Overlap the Snap Panel edges to use as a vapor barrier. Snap Panel buttons are used to lock the
panels together.