Install Instructions

IM-PR 566442 1114 (Design Manual)
154
3 2 1
Always install Climate
Panels for one circuit
at a time.
VERY IMPORTANT:
After Climate Panels and U-Turn
strips are installed, vacuum
grooves out thoroughly! One
loose chip of wood, screw or
nail can damage the tubing or
impede level installation.
Track for tubing
Pex tubing
Track for tubing
Cut Corner
with utility knife (vaccum out of groove)
Climate Panel
Turnaround
Slightly misaligned Panels need to be
trimmed to minimize chance of tubing
damage when being installed.
Climate Panel
Step 7:
Install the Climate Panels one circuit at a time.
To minimize the chance of damaging the tubing while installing, use a utility knife to nip any corners at
turnarounds that did not line up perfectly.
VERY IMPORTANT:
After Climate Panels and U-Turn
Strips are installed, vacuum
grooves out thoroughly! One loose
chip of wood, screw or nail can
damage the tubing or impede level
installation.