Install Instructions

153
IM-PR 566442 1114 (Design Manual)
Step 6:
Install the Climate Panels then
the U-turns.
Installation of U-Turn Strips
You can also cut U-Turn strips
into sections and customize
the use of the strips
Drill supply and return holes 1" x 2"
long. After the holes are drilled, use a
chisel (if needed) to create a smooth
ramp-like surface in which the plastic
elbow sleeve with clip (stock code
15104) is to be inserted.
Cut turnaround pieces in area shown at the
same angle as the wall to maximize heated
area while minimizing the area that needs to
be filled in, especially along the exterior walls.