Install Instructions

PI-PR-560400 0412 (Basic Digital Setpoint Control II)
1 of 4
Viega... The global leader in plumbing, heating and pipe joining systems
301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: [phone] • www.viega.com
©2012, ProPress
®
, FostaPEX
®
, GeoFusion
®
, Seapress
®
MegaPress
®
, MegaPressG
®
, and Viega
®
are registered trademarks of Viega GmbH & Co. PureFlow
®
, Smart Connect
®
, Climate Panel
®
, Climate Mat
®
, Climate
Trak
®
, MANABLOC
®
, Radiant Wizard
®
, S-no-Ice
®
, Snap Panel
®
, XL
®
and XL-C
®
are registered trademarks of Viega LLC. MiniBloc
™
, Rapid Grid
™
, ProRadiant
™
, PolyAlloy
™
, SmartLoop
™
and Zero Lead
™
are trademarks
of Viega LLC; ProPressG
™
and ViegaPEX
™
are trademarks of Viega GmbH & Co. KG. RIDGID
®
is a registered trademark of RIDGID, Inc.
Product
Instructions
Applications
The Viega Basic Digital Setpoint Control II is a
general purpose temperature control with a wide
range of applications in the HVAC industry. This
control provides two isolated SPDT relay contacts.
The two relays are controlled by a watertight sensor,
included with the Basic Digital Setpoint Control.
This control is commonly used as basic heating
and/ or cooling system control for commercial
and residential slab applications.
Features
• Setpoint Control for Heating and Cooling
• Simple installation and programming
• Large digital LCD display
• Reliable, economical
• Two relay outputs with individual
Setpoint capability
• Watertight Sensor included
Specications
Digital Setpoint Control II (17029)
Watertight Sensor (17031)
Digital Setpoint Control II
Input: 24V, 120V, 240V
Output: 2 SPDT dry contacts,
1/2 hp @ 120 VAC
9.8 FLA, 58.8 LRA
Sensor: 6' Resistor, extendable up 100'
Setpoint: -40 - 248°F range
Differential: 1 - 150°F range
Accuracy: +/- 1°F
Environment: -40 - 140°F, 5 - 95% rH,
non-condensing
Power draw: 8 VA
Dimensions: 4.91 x 8.16 x 2.37 in.
Digital Setpoint Control II
Basic Digital Setpoint Control II