Brochure

ManualsBrandsViega ManualsHeating SuppliesReturn Shut-Off Cap for Stainless Steel Shut-Off/Balancing/Flow Meter Manifold (Plastic)

Viega Product Guide

Catalog 2020

Summary of content (284 pages)

PAGE 1
Viega Product Guide Catalog 2020
PAGE 2
Shaping the future of press technology Engineered for you Viega pioneered press technology in North America in 1999 with Viega ProPress. Now more than 20 years later, Viega press technology makes consistent, secure connections possible on copper, stainless, carbon steel, copper nickel and PEX. No other manufacturer can offer the same press technology across multiple materials.
PAGE 3
Registered Trademark: Superior Performance with Viega System Solutions Viega introduced press technology to North America in 1999 with Viega ProPress. Now more than 20 years later, Viega press technology has made consistent, secure connections possible on copper, stainless, carbon steel, copper nickel and PEX. No other manufacturer can offer the same press technology across multiple piping systems.
PAGE 4
Table of Contents 2
PAGE 5
pg. 51 Viega SeaPress Copper nickel press fitting system can be used in a variety of applications from potable water to fuel to fire sprinkler pg. 63 Viega MegaPress Carbon steel press fitting system for a wide variety of applications, including water, excluding gas pg. 73 Viega MegaPressG Carbon steel press fitting system for gas applications pg. 81 Viega MegaPress FKM Carbon steel press fittings with an FKM sealing element, now in more sizes, for a variety of applications pg.
PAGE 6
4
PAGE 7
Viega Heating and Cooling Complete heating and cooling systems for residential, commercial and industrial applications pg. 197 Viega GeoFusion Geothermal heating and cooling systems for residential, commercial and industrial applications pg. 229 Flushing System Technology A wide range of flushing systems that utilize multiple materials and finishes pg. 235 Tools Battery-powered and hand tools, plus jaws and rings, to securely press Viega fittings pg.
PAGE 8
Legend Abbreviation Definition Insulated Hydronic Mixing Equipment Outlet Connection Abbreviation Definition Lbs Pounds BP Bolt Pattern LDPE Low density polyethylene BPd Bolt Pattern Diameter MNT Male Nominal Thread BSP British Standard Pipe MPT Male Pipe Thread BW (IPS) Butt Weld (Iron Pipe Size) NPT National Pipe Thread for Imperial connections C Female Copper Tube Size OC On Center Closet Closet Connection OD Outside Diameter Comp Compression P Press Connection Crimp PE
PAGE 9
How to Read Dimensions of a Fitting or a Product P3 P1 iega ProPress tee V Smart Connect feature - For use with ASTM B88 tubing - Copper - Press connection P2 Components FPT P1 Viega PEX Press wall tee FPT2 Smart Connect feature, Zero Lead - For fire sprinkler systems - Polymer - Female pipe thread, press connection Note For use with black ViegaPEX Ultra only.
PAGE 10
How to Read Dimensions of a Fitting or a Product, continued P2 SeaPress tee - CuNi 90/10 - Press connection P1 P3 Components EPDM sealing elements Applies to SeaPress only. NPT P1 SeaPress tee - CuNi 90/10 - Press connection, male pipe thread P2 P1 15 22 28 35 P2 15 22 28 35 P3 15 22 28 35 Wt [lb] Quantity Part No 0.178 10 453 473 0.347 10 453 480 0.422 4 453 497 0.590 4 453 503 DG 7 7 7 7 P1 35 42 54 NPT ¾ ¾ ¾ P2 35 42 54 Wt [lb] Quantity Part No 0.410 1 461 072 0.
PAGE 11
New New products from Viega 9
PAGE 12
New New products from Viega We pride ourselves on leading the industry while remaining connected to our customers. Every day, we open our doors and create products that change the way engineers and mechanical contractors do business. It’s our job to engineer forward-thinking products. That’s our commitment to the trades: understanding what is needed for the future. Industry connection and product innovation is as important today as it was for our founders more than 120 years ago.
PAGE 13
Index 1.1 ProPress 2.1 MegaPress 2.2 MegaPressG 2.3 MegaPress FKM 2.4 MegaPress 304 FKM 2.5 MegaPress 316 2.6 MegaPress 316 FKM 2.7 MegaPress CuNi 2.8 MegaPress Press-In B ranch Connector 4.1 Heating and Cooling Solutions 6.
PAGE 14
New 1.1 ProPress New New iega ProPress a V utomatic recirculation balancing valve Zero Lead -- For automatic balancing of hot water recirculation -- Suitable for Viega PureFlow Press tailpiece Model 2893ZL, Viega ProPress tailpiece Model 2957ZL -- Bronze -- Male BSP Components Stainless steel ball Technical Data Operating pressure 150 psi Operating temperature 180° F Note Integrated isolation Adjustable setpoint Adjustable bypass Model 2981.3ZL BSP Thread 1x1 Wt [lb] 1.
PAGE 15
iega ProPress b V imetallic thermometer Note Only for use with Viega ProPress drain valve and temperature port Model 2876.8US Wt [lb] 0.056 Quantity Part No 1 23460 DG 8 Wt [lb] 0.047 Quantity Part No 1 23450 DG 8 New iega ProPress valve insulation shell V -- Use with V iega ProPress automatic recirculation balancing valve Model 2981.3ZL -- Expanded polypropylene Model 2910.50 New 2.
PAGE 16
New New New iega MegaPressG t ee V Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection Components HNBR sealing elements Note Must be installed with MegaPress XL rings and PressBooster/Z3 actuator Model 6618XL iega MegaPressG 90° elbow V Smart Connect technology -- For use with Sch.5 to Sch.
PAGE 17
New iega MegaPress 3 V -piece ball valve Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- 316 stainless steel valve/Carbon steel press ends -- Press connection Components FKM sealing elements Model 5975.8 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 2.085 3.570 4.919 5.715 8.441 8.739 Quantity 1 1 1 1 1 1 Part No 86400 86405 86410 86415 86420 86425 DG 12 12 12 12 12 12 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 2.711 3.557 3.857 7.159 9.698 10.
PAGE 18
New New New iega MegaPress t ee V Smart Connect technology -- For use with Sch. 5 to Sch. 40 stainless steel pipe -- 316 stainless steel -- Press connection Components FKM sealing elements Model 6818 iega MegaPress 90° elbow V Smart Connect technology -- For use with Sch. 5 to Sch.
PAGE 19
New iega MegaPress 90° elbow V Smart Connect technology -- For use in installations of Class 200 or Schedule 40 IPS copper nickel pipe -- CuNiFe 90/10 -- Press connection Components FKM sealing elements Note Must be installed with MegaPress XL rings and PressBooster/Z3 actuator Model 0516XL P1 2½ 3 4 P2 2½ 3 4 Wt [lb] 3.707 5.338 8.734 Quantity 1 1 1 Part No 88030 88035 88040 DG 17 17 17 iega MegaPress P V ress-In Branch Connector -- For use with Sch.
PAGE 20
New New ressgun Picco 6 pressing tool P -- For Viega PureFlow Press connections ⅜" to 1½", Viega ProPress connections ½" to 1¼", Viega MegaPress connections ½" and ¾" -- Not for use with MegaPress XL PressBooster and Viega MegaPress Z3 Actuator Components Battery charger, Pressgun Picco 6, battery Model 2989.
PAGE 21
1.
PAGE 22
ProPress 1.1 iega ProPress is the trusted copper press joining solution. Since its V introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a patented technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections.
PAGE 23
ProPress Elbows Tees Adapters Flanges Caps Unions Couplings Reducers Venturi Valves Cross-Overs Stub-Outs Sealing Elements and Gaskets Tools Accessories 22 25 27 28 29 29 30 31 32 32 35 35 35 36 36 21 1.
PAGE 24
1.1 Elbows iega ProPress 90° elbow V Smart Connect technology -- For use with ASTM B88 tubing -- Copper -- Press connection Components EPDM sealing elements Model 2916 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.116 0.173 0.278 0.364 0.667 1.
PAGE 25
iega ProPress 90° elbow V Smart Connect technology, Zero Lead -- For use with ASTM B88 tubing -- Bronze -- Press connection, female pipe thread Components EPDM sealing element Model 2914.2ZL iega ProPress v V ent elbow Smart Connect technology, Zero Lead -- For use with ASTM B88 tubing -- Bronze -- Press connection, female pipe thread Components EPDM sealing elements Model 2917.3ZL P ½ ½ ½ ¾ ¾ 1 1 1¼ 1½ 2 P1 ½ ¾ FPT ⅜ ½ ¾ ½ ¾ ½ 1 1¼ 1½ 2 P2 ½ ¾ FPT ⅛ ⅛ Wt [lb] 0.136 0.181 0.231 0.
PAGE 26
1.1 iega ProPress 45° elbow V Smart Connect technology -- For use with ASTM B88 tubing -- Copper -- Press connection Components EPDM sealing elements Note Must be installed with V iega ProPress X L-C rings and V2 actuator. Model 0926XL 24 P1 2½ 3 4 P2 2½ 3 4 Wt [lb] 1.609 2.336 4.
PAGE 27
ProPress Tees P1 ½ ½ ½ ¾ ¾ ¾ ¾ ¾ 1 1 1 1 1 1 1 1 1 1¼ 1¼ 1¼ 1¼ 1¼ 1¼ 1¼ 1¼ 1¼ 1¼ 1¼ 1¼ 1½ 1½ 1½ 1½ 1½ 1½ 1½ 1½ 1½ 1½ 1½ 2 2 2 2 2 2 2 2 2 2 2 2 P2 ½ ½ ½ ½ ½ ¾ ¾ ¾ ½ ½ ¾ ¾ ¾ 1 1 1 1 ½ ¾ ¾ ¾ ¾ 1 1 1 1¼ 1¼ 1¼ 1¼ 1 1 1 1¼ 1¼ 1¼ 1½ 1½ 1½ 1½ 1½ 1¼ 1½ 1½ 1½ 1½ 1½ 2 2 2 2 2 2 P3 ½ ¾ 1 ½ ¾ ½ ¾ 1 ¾ 1 ½ ¾ 1 ½ ¾ 1 1¼ 1¼ ½ ¾ 1 1¼ ½ ¾ 1 ½ ¾ 1 1¼ ¾ 1 1½ ¾ 1 1¼ ½ ¾ 1 1¼ 1½ 1¼ ¾ 1 1¼ 1½ 2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.202 0.289 0.310 0.277 0.326 0.282 0.333 0.400 0.400 0.449 0.367 0.399 0.457 0.378 0.400 0.443 0.580 0.600 0.
PAGE 28
1.1 26 iega ProPress t ee V Smart Connect technology -- For use with ASTM B88 tubing -- Copper -- Press connection Components EPDM sealing elements Note Must be installed with V iega ProPress X L-C rings and V2 actuator.
PAGE 29
ProPress iega ProPress a V dapter Smart Connect technology, Zero Lead -- For use with ASTM B88 tubing -- Bronze -- Press connection, male pipe thread Components EPDM sealing element Model 2911ZL P ½ ½ ½ ¾ ¾ ¾ 1 1 1 1¼ 1¼ 1¼ 1½ 1½ 1½ 2 2 MPT ⅜ ½ ¾ ½ ¾ 1 ¾ 1 1¼ 1 1¼ 1½ 1¼ 1½ 2 1½ 2 Wt [lb] 0.091 0.107 0.150 0.146 0.155 0.237 0.234 0.256 0.458 0.322 0.452 0.522 0.597 0.549 0.934 0.858 0.
PAGE 30
1.1 iega ProPress a V dapter Smart Connect technology -- For use with ASTM B88 tubing -- Copper -- Press connection, female pipe thread Components EPDM sealing element Note Must be installed with V iega ProPress X L-C rings and V2 actuator. Model 0912XL iega ProPress adapter V Zero Lead -- For use with V iega ProPress fittings -- Bronze -- Street, female pipe thread Model 2912.
PAGE 31
ProPress iega ProPress c V ap Smart Connect technology -- For use with ASTM B88 tubing -- Copper -- Press connection Components EPDM sealing element Model 2956 P ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.057 0.088 0.122 0.175 0.326 0.
PAGE 32
1.1 iega ProPress t ailpiece V Smart Connect technology, Zero Lead -- For use with ASTM B88 tubing -- Bronze -- Press connection, female union BSP Components EPDM sealing element, EPDM flat gasket Model 2957ZL P ½ ¾ 1 1 F BSP 1 1 1 1¼ Wt [lb] 0.220 0.248 0.304 0.
PAGE 33
ProPress iega ProPress r educer V Smart Connect technology -- For use with ASTM B88 tubing -- Copper -- Press connection Components EPDM sealing elements Model 2915.2 P1 ¾ 1 1 1¼ 1¼ 1½ 1½ 1½ 2 2 2 2 P2 ½ ½ ¾ ¾ 1 ¾ 1 1¼ ¾ 1 1¼ 1½ Wt [lb] 0.122 0.170 0.175 0.248 0.250 0.426 0.410 0.402 0.595 0.557 0.549 0.
PAGE 34
Venturi 1.1 iega ProPress venturi insert V Zero Lead -- For use with V iega ProPress tees -- Bronze -- Street Model 2911.5ZL FTG1 1¼ 1½ 2 FTG2 1¼ 1½ 2 Wt [lb] 0.300 0.468 0.671 Quantity 1 1 1 Part No 78810 78811 78812 DG 8 8 8 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.463 0.659 0.992 1.512 2.587 3.910 Quantity 1 1 1 1 1 1 Part No 79920 79925 79930 79935 799401 799501 DG 8 8 8 8 8 8 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.458 0.648 1.014 1.508 2.204 3.
PAGE 35
ProPress New New P ½ ¾ 1 FPT ½ ¾ 1 Wt [lb] 0.580 0.910 1.430 Quantity 1 1 1 Part No 24030 24035 24040 DG 8 8 8 iega ProPress b V all valve Smart Connect technology -- For non-potable application -- Bronze/brass -- Press connection, hose connection -- Full port Components EPDM sealing element Note NH threads (garden hose) Model 2973.3 P ½ ¾ Hose ¾ ¾ Wt [lb] 0.695 0.
PAGE 36
1.1 iega ProPress powerhead cartridge V Zero Lead -- Suitable for powerhead Model2877.7, 2877.8 -- Use with V iega ProPress automatic recirculation balancing valve M odel2981.3ZL -- Bronze Model 2913.8ZL Wt [lb] 0.220 Quantity Part No 1 79903 DG 8 Wt [lb] 0.203 Quantity Part No 1 23470 DG 8 Wt [lb] 0.056 Quantity Part No 1 23460 DG 8 Wt [lb] 0.047 Quantity Part No 1 23450 DG 8 Wt [lb] 8.283 8.803 16.
PAGE 37
ProPress iega ProPress c V ross-over Smart Connect technology -- For use with ASTM B88 tubing -- Copper -- Press connection Components EPDM sealing elements Model 2928 P1 ½ ¾ 1) P2 ½ ¾ Wt [lb] 0.237 0.413 Quantity Part No 10 777421 10 777471 DG 8 8 Wt [lb] 0.279 0.453 Quantity Part No 10 19786 10 19791 DG 8 8 1.
PAGE 38
Tools 1.1 RP 241 compact press tool kit, ProPress or Pureflow -- For Viega P roPress connections ½" to 1¼", Viega PureFlow Press connections ⅜" to 1½" Components Ridgid RP 241, ProPress jaw sizes ½" to 1¼" OR PureFlow jaw sizes ⅜ to 1½, battery, battery charger, branded soft-sided case Model 2880.7US Press Jaws ProPress New for d ½, ¾, 1, 1¼ Wt [lb] 19.
PAGE 39
ProPress L [in] 1½ 1⅝ 1¾ W [in] ⅝ ⅝ ⅝ Bolts 4 4 8 1.1 iega ProPress b V olt set -- For butterfly valve -- Suitable for V iega P roPress butterfly valve Model2873.81 -- Galvanized steel Components Bolt, washer Model 2873.89 Valve Size 2½ 3 4 Wt [lb] 0.830 1.035 1.799 Quantity 1 1 1 Part No 197681 197732 197783 DG 8 8 8 Wt [lb] 0.871 1.572 3.
PAGE 40
iega ProPress s V tem extension -- For Viega P roPress Zero Lead ball valves -- Bronze Model 2971.96 Valve Size ½, ¾ 1, 1¼ 1½, 2 Wt [lb] 0.207 0.245 Quantity 1 1 1 Part No 234431 234452 234473 DG 8 8 8 1.
PAGE 41
1.
PAGE 42
ProPress 304 FKM 1.2 iega ProPress 304 FKM is engineered for commercial and industrial V environments, such as breweries and other facilities. With applications ranging from fire protection systems to compressed air, Viega ProPress 304 FKM is a complete solution with pipe, valves and fittings. Viega ProPress fittings offer patented Smart Connect technology, providing installers added confidence in their ability to ensure the integrity of connections.
PAGE 43
ProPress 304 FKM Pipe Elbows Tees Adapters Flanges Caps Unions Couplings Reducers Valves Sealing Elements and Gaskets Tools Accessories 42 42 44 45 45 46 46 46 47 48 48 48 49 41 1.
PAGE 44
1.2 Pipe iega ProPress p V ipe -- For use with V iega ProPress stainless fittings -- 304 stainless steel Note All Viega P roPress stainless pipe is copper tube size (CTS). ASTM A312 Model 0103 d ½ ¾ 1 1¼ 1½ 2 L [ft] 20 20 20 20 20 20 Wt [lb] 7.480 10.800 14.120 17.460 20.740 27.
PAGE 45
iega ProPress 90° street elbow V Smart Connect technology -- For use with V iega ProPress stainless pipe -- 304 stainless steel -- Press connection, street Components FKM sealing element Model 6016.1 P ½ ¾ 1 1½ 2 FTG (CTS) ½ ¾ 1 1½ 2 Wt [lb] 0.115 0.219 0.315 0.782 0.
PAGE 46
Tees P1 ½ ¾ ¾ 1 1 1 1¼ 1¼ 1¼ 1¼ 1½ 1½ 1½ 1½ 2 2 2 2 2 P2 ½ ¾ ¾ 1 1 1 1¼ 1¼ 1¼ 1¼ 1½ 1½ 1½ 1½ 2 2 2 2 2 P3 ½ ½ ¾ ½ ¾ 1 ½ ¾ 1 1¼ ½ ¾ 1 1½ ½ ¾ 1 1½ 2 Wt [lb] 0.165 0.242 0.264 0.316 0.340 0.364 0.359 0.403 0.445 0.452 0.641 0.655 0.683 0.842 0.753 0.755 0.804 0.998 1.
PAGE 47
ProPress 304 FKM Adapters P ½ ½ ¾ ¾ ¾ 1 1 1¼ 1½ 2 MPT ½ ¾ ½ ¾ 1 ¾ 1 1¼ 1½ 2 Wt [lb] 0.117 0.171 0.152 0.179 0.434 0.203 0.308 0.584 0.733 1.
PAGE 48
1.2 Caps iega ProPress c V ap Smart Connect technology -- For use with V iega ProPress stainless pipe -- 304 stainless steel -- Press connection Components FKM sealing element Model 6056 P ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.038 0.079 0.105 0.161 0.258 0.
PAGE 49
iega ProPress c V oupling No stop Smart Connect technology -- For use with V iega ProPress stainless pipe -- 304 stainless steel -- Press connection Components FKM sealing elements Model 6015.5 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.076 0.130 0.166 0.242 0.390 0.
PAGE 50
Valves iega ProPress 3 V -piece ball valve Smart Connect technology -- For use with V iega ProPress stainless pipe -- 316 stainless steel -- Press connection Components FKM sealing elements Model 4370.8 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 1.433 2.085 2.799 3.714 5.298 7.780 Quantity 1 1 1 1 1 1 Part No 85132 85133 85134 85136 85137 85138 DG 9 9 9 9 9 9 1.
PAGE 51
ProPress 304 FKM New for d ½–2 Wt [lb] 56.684 Quantity Part No 1 56023 DG 16 XL-C ProPress ring kit -- For Ridgid standard tools, Viega ProPress connections 2½" to 4" -- Phosphated steel Components V2 actuator, ProPress XL-C rings sizes 2½" to 4", hard case Model 2999.4XL for d 2½–4 Wt [lb] Quantity Part No 1 570761 DG 16 Wt [lb] 0.871 1.572 3.141 Quantity 1 1 1 DG 8 8 8 1) 1.
PAGE 52
PAGE 53
1.
PAGE 54
ProPress 316 1.3 iega ProPress 316 is engineered for commercial and industrial V environments, such as breweries and other facilities. With applications ranging from industrial gases to caustic chemicals, Viega ProPress 316 is a complete solution with pipe, valves and fittings. Viega ProPress fittings offer Smart Connect, a patented technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections.
PAGE 55
ProPress 316 Index 54 54 55 57 58 58 58 59 59 60 60 61 61 1.
PAGE 56
1.3 Pipe iega ProPress p V ipe -- For use with V iega ProPress stainless fittings -- 316 stainless steel Note All Viega P roPress stainless pipe is copper tube size (CTS). ASTM A312 Model 4003 d ½ ¾ 1 1¼ 1½ 2 L [ft] 20 20 20 20 20 20 Wt [lb] 7.480 10.800 14.120 17.460 20.740 27.
PAGE 57
ProPress 316 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.091 0.190 0.234 0.353 0.527 0.738 Quantity 10 10 5 1 1 1 Part No 80445 80450 80455 80460 80465 80470 DG 9 9 9 9 9 9 iega ProPress 45° elbow V Smart Connect technology -- For use with V iega ProPress stainless pipe -- 316 stainless steel -- Press connection Components EPDM sealing elements Note Must be installed with V iega ProPress X L-C rings and V2 actuator. Model 4026XL P1 2½ 3 4 P2 2½ 3 4 Wt [lb] 1.428 1.917 3.
PAGE 58
1.3 iega ProPress t ee V Smart Connect technology -- For use with V iega ProPress stainless pipe -- 316 stainless steel -- Press connection Components EPDM sealing elements Note Must be installed with V iega ProPress X L-C rings and V2 actuator. Model 4018XL P1 2½ 2½ 2½ 2½ 2½ 3 3 3 3 3 4 4 4 4 4 P2 2 2 2½ 2½ 2½ 3 3 3 3 3 4 4 4 4 4 P3 1½ 2 1½ 2 2½ 1¼ 1½ 2 2½ 3 1½ 2 2½ 3 4 Wt [lb] 1.554 1.737 1.573 1.739 2.056 1.836 1.955 2.151 2.471 2.722 2.733 3.019 3.366 3.659 4.
PAGE 59
ProPress 316 Adapters P ½ ½ ¾ ¾ ¾ 1 1 1¼ 1½ 2 MPT ½ ¾ ½ ¾ 1 ¾ 1 1¼ 1½ 2 Wt [lb] 0.117 0.170 0.152 0.185 0.441 0.200 0.317 0.588 0.723 1.
PAGE 60
Flanges iega ProPress a V dapter flange Smart Connect technology -- For use with V iega ProPress stainless pipe -- 316 stainless steel -- Press connection Components EPDM sealing element Model 4059 1.3 iega ProPress a V dapter flange Smart Connect technology -- For use with V iega ProPress stainless pipe -- 316 stainless steel -- Press connection Components EPDM sealing element Note Must be installed with V iega ProPress X L-C rings and V2 actuator.
PAGE 61
ProPress 316 Couplings P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.081 0.131 0.165 0.253 0.414 0.564 Quantity 10 10 5 1 1 1 Part No 80265 80270 80275 80280 80285 80290 DG 9 9 9 9 9 9 iega ProPress c V oupling With stop Smart Connect technology -- For use with V iega ProPress stainless pipe -- 316 stainless steel -- Press connection Components EPDM sealing elements Note Must be installed with V iega ProPress X L-C rings and V2 actuator.
PAGE 62
iega ProPress r educer V Smart Connect technology -- For use with V iega ProPress stainless pipe -- 316 stainless steel -- Street, press connection Components EPDM sealing element Note Must be installed with V iega ProPress X L-C rings and V2 actuator. Model 4015.1XL FTG (CTS) 2½ 3 3 4 4 4 P 2 2 2½ 2 2½ 3 Wt [lb] 0.780 0.981 1.159 1.455 1.609 1.719 Quantity 1 1 1 1 1 1 Part No 80235 80240 80245 80250 80255 80260 DG 9 9 9 9 9 9 Wt [lb] 0.714 0.943 1.322 2.244 3.496 5.
PAGE 63
ProPress 316 Tools RP 241 compact press tool kit, ProPress or Pureflow -- For Viega P roPress connections ½" to 1¼", Viega PureFlow Press connections ⅜" to 1½" Components Ridgid RP 241, ProPress jaw sizes ½" to 1¼" OR PureFlow jaw sizes ⅜ to 1½, battery, battery charger, branded soft-sided case Model 2880.7US Press Jaws ProPress New for d ½, ¾, 1, 1¼ Wt [lb] 19.195 Quantity Part No 1 56021 DG 16 for d Jaws not included Wt [lb] 22.
PAGE 64
Flange bolt set -- For adapter flange -- Galvanized carbon steel Components Bolt, nut, washer Model 2959.7 L [in] 2½ 2¾ 2¾ W [in] ½ ⅝ ⅝ Bolts 4 4 8 Flange ½, ¾, 1, 1¼, 1½ 2, 2½, 3 4 Wt [lb] 0.871 1.572 3.
PAGE 65
1.
PAGE 66
SeaPress Viega LLC offers the Viega SeaPress system for marine and industrial pipe joining applications. The Viega SeaPress system, in metric sizes, can be used in a variety of applications from potable water to fuel to fire sprinkler. The Viega SeaPress system is a 90/10 copper nickel alloy that is specifically designed to stand up to the harsh environments of the sea.
PAGE 67
SeaPress Index 66 67 68 68 69 69 70 70 71 1.
PAGE 68
Elbows SeaPress 90° elbow -- CuNiFe 90/10 -- Press connections Components EPDM sealing elements Model 0316 SeaPress XL 90° elbow -- Use with Z2 actuator press ring set (3) Model 2497.3XL -- CuNiFe 90/10 -- Press connections Components EPDM sealing elements Model 0316XL 1.4 SeaPress 90° elbow -- CuNiFe 90/10 -- Press connection, street Components EPDM sealing element Model 0316.1 SeaPress XL 90° elbow -- Use with Z2 actuator press ring set (3) Model 2497.
PAGE 69
SeaPress SeaPress XL 45° elbow -- Use with Z2 actuator press ring set (3) Model 2497.3XL -- CuNiFe 90/10 -- Press connection, street Components EPDM sealing element Model 0326.1XL P 76.1 88.9 108.0 FTG 76.1 88.9 108.0 Wt [lb] 1.962 2.124 4.011 Quantity 1 1 1 Part No 556 587 556 594 556 600 DG 7 7 7 Wt [lb] 0.178 0.357 0.422 0.611 0.904 1.136 1.206 1.385 1.
PAGE 70
1.4 Adapters SeaPress a dapter -- CuNiFe 90/10 -- Press connection, R-thread Components EPDM sealing element Model 0311 P 15 22 28 35 42 54 R ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.112 0.204 0.284 0.436 0.644 1.067 Quantity 4 4 4 2 2 2 Part No 452 971 452 995 452 988 453 008 453 015 453 022 DG 7 7 7 7 7 7 SeaPress a dapter -- CuNiFe 90/10 -- Press connection, male pipe thread Components EPDM sealing element Model 0311.5 P 15 22 28 35 42 54 NPT ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.120 0.208 0.296 0.445 0.
PAGE 71
SeaPress SeaPress X L flange -- Use with P2 actuator press jaw set Model 2297.3XL -- Bronze -- Press connection -- ANSI 150lb drilled flange x metric press Components EPDM sealing element Model 2259.5XU P 76.1 88.9 108.0 Wt [lb] 8.463 10.207 14.147 Quantity 1 1 1 Part No 592 059 592 066 592 073 DG 7 7 7 SeaPress u nion -- CuNiFe 90/10 -- Press connection, R-thread Components EPDM flat gasket, EPDM sealing element Model 0365 P 15 22 22 28 35 42 R ½ ½ ¾ 1 1¼ 1½ Wt [lb] 0.293 0.430 0.
PAGE 72
SeaPress XL c oupling No stop -- Use with Z2 actuator press ring set (3) Model 2497.3XL -- CuNiFe 90/10 -- Press connections Components EPDM sealing elements Model 0315.5XL P1 76.1 88.9 108.0 P2 76.1 88.9 108.0 Wt [lb] 1.508 1.740 2.806 Quantity 1 1 1 Part No 453 411 453 428 453 435 DG 7 7 7 FTG 22 28 35 35 42 42 54 54 P 15 22 22 28 28 35 35 42 Wt [lb] 0.087 0.134 0.175 0.185 0.287 0.301 0.392 0.
PAGE 73
SeaPress Z1 actuator press ring set -- Not suitable for compact tool (24 kN) -- Phosphated steel -- Metric size Components Z1 actuator, (6) press rings sizes 12 mm to 35 mm, case Model 2496.5 for d 12–35 Wt [lb] 11.794 Quantity Part No 1 639 495 DG 8 Wt [lb] 14.108 Quantity Part No 1 472 764 DG 7 Wt [lb] 44.300 Quantity Part No 1 362 959 DG 7 Wt [lb] 38.283 Quantity Part No 1 562 854 DG 7 Wt [lb] 0.001 0.001 0.001 0.001 0.001 0.002 0.002 0.003 0.005 0.
PAGE 74
Sealing element EPDM -- For Sanpress XL, drinking water installation, heating installation -- Temperature stability up to 250° F Model 2289XL for d 76.1 88.9 108.0 i.d. 77 90 109 s 5 5 5 Wt [lb] 0.014 0.016 0.019 Quantity 10 10 10 Part No 364 816 364 823 364 830 DG 7 7 7 Wt [lb] 0.007 0.007 0.007 0.010 0.011 0.011 0.014 0.014 Quantity 5 5 5 5 5 5 5 5 Part No 348 571 348 588 348 595 348 601 348 618 348 625 348 632 348 649 DG 7 7 7 7 7 7 7 7 i.d.
PAGE 75
2.
PAGE 76
MegaPress 2.1 iega MegaPress is the first clean, secure and efficient choice for V joining carbon steel pipe. It is suitable for renovations, repairs or installation of new carbon steel pipe systems. Viega MegaPress can even be installed on noncombustible/flammable lines that are not completely shut down, eliminating the need to fully drain a system, and shortening repair and installation time.
PAGE 77
MegaPress Index 76 76 77 77 78 78 78 79 79 79 80 2.
PAGE 78
Elbows iega MegaPress 90° elbow V Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection Components EPDM sealing elements Model 4816 iega MegaPress 90° street elbow V Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection, street Components EPDM sealing element Model 4816.1 iega MegaPress 45° elbow V Smart Connect technology -- For use with Sch.5 to Sch.
PAGE 79
MegaPress iega MegaPress t ee V Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection, female pipe thread Components EPDM sealing elements Model 4817.2 P1 ¾ ¾ 1 1 1¼ 1¼ 1¼ 1½ 1½ 1½ 1½ 2 2 2 2 2 P2 ¾ ¾ 1 1 1¼ 1¼ 1¼ 1½ 1½ 1½ 1½ 2 2 2 2 2 FPT ½ ¾ ½ ¾ ½ ¾ 1 ½ ¾ 1 1¼ ½ ¾ 1 1¼ 1½ Wt [lb] 0.611 0.639 0.884 0.915 1.344 1.349 1.492 1.715 1.741 1.929 1.829 2.358 2.400 2.535 2.446 2.
PAGE 80
Caps iega MegaPress c V ap Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection Components EPDM sealing element Model 4856 P ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.203 0.264 0.397 0.617 0.804 1.080 Quantity 10 10 5 1 1 1 Part No 25730 25735 25740 25745 25750 25755 DG 12 12 12 12 12 12 Unions iega MegaPress u V nion Smart Connect technology -- For use with Sch.5 to Sch.
PAGE 81
MegaPress iega MegaPress e V xtended coupling No stop Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection Components EPDM sealing elements Model 4815.3 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.348 0.443 0.672 1.001 1.278 1.693 Quantity 10 10 5 1 1 1 Part No 25070 25075 25080 25085 25090 25095 DG 12 12 12 12 12 12 Wt [lb] 0.276 0.364 0.397 0.661 0.710 0.793 0.926 1.047 1.168 1.
PAGE 82
V2 Actuator press jaw set -- For Ridgid standard tools, Viega MegaPress connections ½" to 2" Components V2 actuator, MegaPress jaw sizes ½" to 1", MegaPress rings sizes 1 ¼" to 2", branded soft-sided case Model 2880.71 RP 340 standard press tool -- For Viega PureFlow Press connections ½" to 2", Viega P roPress connections ½" to 4", Viega M egaPress connections ½" to 4" Components Ridgid 340 tool, battery, battery charger, hard case Model 2980.71 for d ½–2 Wt [lb] 48.
PAGE 83
2.
PAGE 84
MegaPressG 2.2 iega MegaPressG with an HNBR sealing element is the first V press fitting system for carbon steel pipe approved for use in gas and fuel oil applications. Viega MegaPressG is ideal for industrial, commercial and residential applications and performs well in both new installations and retrofit projects. Tested to the strictest standards in North America, Viega MegaPressG joins carbon steel pipe reliably through the engineered design of the fittings and a battery-powered press tool.
PAGE 85
MegaPressG Index 84 85 86 87 88 88 89 90 90 91 2.
PAGE 86
Elbows 2.2 New New iega MegaPressG 90° elbow V Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection Components HNBR sealing elements Model 6616 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.370 0.503 0.811 1.278 1.708 2.541 Quantity 10 10 5 1 1 1 Part No 25201 25206 25211 25216 25221 25226 DG 12 12 12 12 12 12 iega MegaPressG 90° elbow V Smart Connect technology -- For use with Sch.5 to Sch.
PAGE 87
MegaPressG iega MegaPressG 45° elbow V Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection Components HNBR sealing elements Note Must be installed with MegaPress XL rings and PressBooster/Z3 actuator Model 6626XL P1 2½ 3 4 P2 2½ 3 4 Wt [lb] 2.482 3.471 5.686 Quantity 1 1 1 Part No 28630 28635 28640 DG 12 12 12 New iega MegaPressG 45° street elbow V Smart Connect technology -- For use with Sch.5 to Sch.
PAGE 88
New 2.2 New iega MegaPressG t ee V Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection Components HNBR sealing elements Note Must be installed with MegaPress XL rings and PressBooster/Z3 actuator Model 6618XL P1 2½ 2½ 2½ 2½ 2½ 3 3 3 3 3 4 4 4 4 4 P2 2½ 2½ 2½ 2½ 2½ 3 3 3 3 3 4 4 4 4 4 P3 1 1¼ 1½ 2 2½ 1¼ 1½ 2 2½ 3 1½ 2 2½ 3 4 Wt [lb] 2.358 2.729 2.821 3.246 3.369 3.577 3.753 4.077 4.256 4.796 5.539 5.953 6.325 6.727 7.
PAGE 89
MegaPressG New P 2½ 3 4 MPT 2½ 3 4 Wt [lb] 1.719 2.338 4.119 Quantity 1 1 1 Part No 28740 28745 28750 DG 12 12 12 iega MegaPressG a V dapter Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection, female pipe thread Components HNBR sealing element Model 6612 P ½ ¾ ¾ 1 1 1 1¼ 1¼ 1¼ 1¼ 1½ 1½ 1½ 1½ 1½ 2 2 2 2 2 2 FPT ½ ½ ¾ ½ ¾ 1 ½ ¾ 1 1¼ ½ ¾ 1 1¼ 1½ ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.246 0.291 0.315 0.441 0.441 0.538 0.660 0.670 0.749 0.
PAGE 90
New iega MegaPressG fl V ange Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection Components HNBR sealing element Note Must be installed with MegaPress XL rings and PressBooster/Z3 actuator Model 6659.5XL P 2½ 3 4 BP 4 4 8 BPd 5½ 6 7½ Wt [lb] 8.426 9.881 13.
PAGE 91
MegaPressG New New iega MegaPressG c V oupling With stop Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection Components HNBR sealing elements Model 6615 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.260 0.353 0.514 0.860 1.124 1.433 Quantity 10 10 5 1 1 1 Part No 25001 22009 25011 25016 25021 25026 DG 12 12 12 12 12 12 iega MegaPressG c V oupling With stop Smart Connect technology -- For use with Sch.5 to Sch.
PAGE 92
Reducers New iega MegaPressG r educer V Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Street, press connection Components HNBR sealing element Model 6615.1 FTG (IPS) ¾ 1 1 1¼ 1½ 1½ 1½ 2 2 2 P ½ ½ ¾ 1 ¾ 1 1¼ 1 1¼ 1½ Wt [lb] 0.276 0.364 0.397 0.688 0.710 0.793 0.926 1.047 1.168 1.
PAGE 93
MegaPressG iega MegaPress X V L PressBooster -- For Viega M egaPress connections 2½", 3", 4" Components XL PressBooster, 2½" press ring, shoulder strap, hard case Note Capable of pressing 3" and 4" connections with the purchase of additional press rings Model 4896.2XL for d 2½–4 Wt [lb] 37.
PAGE 94
PAGE 95
2.
PAGE 96
MegaPress FKM 2.3 iega MegaPress FKM is the first and only clean, secure and V efficient choice for joining ½" to 4" carbon steel pipe with an FKM sealing element (formerly known as MegaPress XL for sizes 2½" to 4"). Meticulously engineered, it is suitable for renovations, repairs or installation of new carbon steel pipe systems.
PAGE 97
MegaPress FKM Index 96 97 98 99 100 100 100 101 101 102 103 2.
PAGE 98
Elbows New 2.3 New New 96 iega MegaPress 90° elbow V Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection Components FKM sealing elements Model 5916 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.381 0.520 0.829 1.303 1.772 2.557 Quantity 10 10 5 1 1 1 Part No 84305 84310 84315 84320 84325 84330 DG 12 12 12 12 12 12 iega MegaPress 90° elbow V Smart Connect technology -- For use with Sch.5 to Sch.
PAGE 99
MegaPress FKM iega MegaPress 45° elbow V Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection Components FKM sealing elements Note Must be installed with MegaPress XL rings and PressBooster/Z3 actuator Model 4826XL New P1 2½ 3 4 P2 2½ 3 4 Wt [lb] 2.830 3.418 5.338 Quantity 1 1 1 Part No 26530 26535 26540 DG 12 12 12 iega MegaPress 45° street elbow V Smart Connect technology -- For use with Sch.5 to Sch.
PAGE 100
New iega MegaPress t ee V Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection Components FKM sealing elements Note Must be installed with MegaPress XL rings and PressBooster/Z3 actuator Model 4818XL P1 2½ 2½ 2½ 3 3 3 3 3 4 4 4 4 4 P2 2½ 2½ 2½ 3 3 3 3 3 4 4 4 4 4 P3 1½ 2 2½ 1¼ 1½ 2 2½ 3 1½ 2 2½ 3 4 Wt [lb] 2.755 3.570 3.672 3.498 3.747 4.576 4.247 4.739 5.413 5.453 5.640 6.198 7.
PAGE 101
MegaPress FKM New iega MegaPress a V dapter Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection, female pipe thread Components FKM sealing element Model 5912 P ½ ¾ ¾ 1 1 1 1¼ 1¼ 1¼ 1¼ 1½ 1½ 1½ 1½ 1½ 2 2 2 2 FPT ½ ½ ¾ ½ ¾ 1 ½ ¾ 1 1¼ ½ ¾ 1 1¼ 1½ ¾ 1 1½ 2 Wt [lb] 0.251 0.306 0.322 0.450 0.441 0.541 0.679 0.703 0.789 0.705 0.864 0.882 0.976 0.886 0.967 1.168 1.254 1.217 1.
PAGE 102
Caps iega MegaPress c V ap Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection Components FKM sealing element Model 5956 P ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.207 0.271 0.406 0.635 0.838 1.113 Quantity 10 10 5 1 1 1 Part No 84100 84105 84110 84115 84120 84125 DG 12 12 12 12 12 12 iega MegaPress c V ap Smart Connect technology -- For use with Sch.5 to Sch.
PAGE 103
MegaPress FKM New iega MegaPress c V oupling No stop Smart Connect technology -- For use with Sch.5 to Sch.40 carbon steel pipe -- Carbon steel -- Press connection Components FKM sealing elements Model 5915.5 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.261 0.344 0.533 0.873 1.155 1.471 Quantity 10 10 5 1 1 1 Part No 84130 84135 84140 84145 84150 84155 DG 12 12 12 12 12 12 iega MegaPress c V oupling No stop Smart Connect technology -- For use with Sch.5 to Sch.
PAGE 104
2.3 Tools 102 RP 340 standard press tool kit, MegaPress -- For Viega PureFlow Press connections ½" to 2", Viega P roPress connections ½" to 4", Viega M egaPress connections ½" to 4" Components Ridgid 340 tool, MegaPress jaw sizes ½" to 1", battery, battery charger, branded soft-sided case Model 2880.7 for d ½, ¾, 1 Wt [lb] 28.
PAGE 105
MegaPress FKM Accessories Flange bolt set -- For adapter flange -- Galvanized carbon steel Components Bolt, nut, washer Model 2959.7 L [in] 2½ 2¾ 2¾ W [in] ½ ⅝ ⅝ Bolts 4 4 8 Flange ½, ¾, 1, 1¼, 1½ 2, 2½, 3 4 Wt [lb] 0.871 1.572 3.
PAGE 106
PAGE 107
2.
PAGE 108
MegaPress 304 FKM 2.4 iega MegaPress 304 FKM fittings are the industry's first V stainless fittings for Schedule 5 to 40 piping systems. Save labor cost and system downtime with press fittings in a wide variety of configurations, available in sizes ½" to 4". MegaPress 304 with an FKM sealing element is suitable for chemical and higher temperature applications.
PAGE 109
MegaPress 304 FKM Index 108 109 110 111 111 111 112 112 113 113 114 2.
PAGE 110
2.4 Elbows 108 iega MegaPress 90° elbow V Smart Connect technology -- 304 stainless steel -- Press connection Components FKM sealing elements Model 4116 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.324 0.423 0.789 1.258 1.510 2.
PAGE 111
MegaPress 304 FKM iega MegaPress 45° street elbow V Smart Connect technology -- 304 stainless steel -- Press connection, street Components FKM sealing element Model 4126.1 P ½ ¾ 1 1¼ 1½ 2 FTG (IPS) ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.276 0.355 0.648 1.003 1.188 1.
PAGE 112
iega MegaPress t ee V Smart Connect technology -- 304 stainless steel -- Press connection, female pipe thread Components FKM sealing element Note Must be installed with MegaPress XL rings and PressBooster/Z3 actuator Model 4117.2XL P1 2½ 3 4 P2 2½ 3 4 FPT ¾ ¾ ¾ Wt [lb] 2.484 3.090 5.
PAGE 113
MegaPress 304 FKM iega ProPress transition coupling V -- For transitioning between IPS and CTS systems -- 304 stainless steel -- Butt weld - iron pipe size, street Model 0113.1XL FTG (IPS) 2½ 3 4 FTG (CTS) 2½ 3 4 Wt [lb] 1.031 1.300 1.887 Quantity 1 1 1 Part No 85135 85145 85155 DG 9 9 9 BPd 2⅜ 2¾ 3⅛ 3⅞ 3½ 4¾ Wt [lb] 1.051 1.488 2.133 2.658 3.650 5.030 Quantity 1 1 1 1 1 1 Part No 95440 95445 95450 95870 95455 95460 DG 14 14 14 14 14 14 Wt [lb] 8.276 9.881 13.
PAGE 114
Couplings New iega MegaPress c V oupling With stop Smart Connect technology -- 304 stainless steel -- Press connection Components FKM sealing elements Model 4115 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.227 0.289 0.505 0.849 1.069 1.
PAGE 115
MegaPress 304 FKM iega MegaPress r educer V Smart Connect technology -- 304 stainless steel -- Press connection Components FKM sealing elements Model 4115.2 P1 ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1 1½ Wt [lb] 0.320 0.480 0.787 0.849 1.
PAGE 116
iega MegaPress press ring set, 3" and 4" V -- For use with MegaPress XL PressBooster and Viega M egaPress Z3 Actuator Components 3" and 4" MegaPress rings, hard case Model 4896.5XL for d 3‑4 Wt [lb] 21.599 Quantity Part No 1 26201 DG 16 Wt [lb] 0.871 1.572 3.141 Quantity 1 1 1 DG 8 8 8 Accessories Flange bolt set -- For adapter flange -- Galvanized carbon steel Components Bolt, nut, washer Model 2959.
PAGE 117
2.
PAGE 118
MegaPress 316 MegaPress press fittings in 316 stainless steel are the industry’s first press fittings for Schedule 5 to 40 piping systems. Save labor cost and system downtime with press fittings in a wide variety of configurations, available in sizes ½" to 4". iega MegaPress 316 with an EPDM sealing element is suitable for V use with chilled water, compressed air, potable water, marine applications and more. Not for use with gas applications.
PAGE 119
MegaPress 316 Index 118 119 120 120 121 121 121 122 122 123 124 2.
PAGE 120
2.5 Elbows 118 iega MegaPress 90° elbow V Smart Connect technology -- 316 stainless steel -- Press connection Components EPDM sealing elements Model 5116 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.315 0.422 0.785 1.247 1.527 2.
PAGE 121
MegaPress 316 iega MegaPress 45° street elbow V Smart Connect technology -- 316 stainless steel -- Press connection, street Components EPDM sealing element Model 5126.1 P ½ ¾ 1 1¼ 1½ 2 FTG (IPS) ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.271 0.353 0.648 1.007 1.232 1.
PAGE 122
iega MegaPress t ee V Smart Connect technology -- 316 stainless steel -- Press connection, female pipe thread Components EPDM sealing element Note Must be installed with MegaPress XL rings and PressBooster/Z3 actuator Model 5117.2XL P1 2½ 3 4 P2 2½ 3 4 FPT ¾ ¾ ¾ Wt [lb] 2.477 3.066 4.
PAGE 123
MegaPress 316 iega MegaPress fl V ange Smart Connect technology -- 316 stainless steel -- Press connection Components EPDM sealing element Note Must be installed with MegaPress XL rings and PressBooster/Z3 actuator Model 5159XL P 2½ 3 4 BP 4 4 8 BPd 5½ 6 7½ Wt [lb] 8.342 9.709 13.
PAGE 124
iega MegaPress c V oupling No stop Smart Connect technology -- 316 stainless steel -- Press connection Components EPDM sealing elements Model 5115.5 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.224 0.291 0.502 0.846 1.001 1.
PAGE 125
MegaPress 316 Tools for d ½, ¾, 1 Wt [lb] 28.992 Quantity Part No 1 56012 DG 16 V2 Actuator press jaw set -- For Ridgid standard tools, Viega MegaPress connections ½" to 2" Components V2 actuator, MegaPress jaw sizes ½" to 1", MegaPress rings sizes 1 ¼" to 2", branded soft-sided case Model 2880.71 for d ½–2 Wt [lb] 48.
PAGE 126
Accessories Flange bolt set -- For adapter flange -- Galvanized carbon steel Components Bolt, nut, washer Model 2959.7 L [in] 2½ 2¾ 2¾ W [in] ½ ⅝ ⅝ Bolts 4 4 8 Flange ½, ¾, 1, 1¼, 1½ 2, 2½, 3 4 Wt [lb] 0.871 1.572 3.
PAGE 127
2.
PAGE 128
2.6 MegaPress 316 FKM iega MegaPress 316 FKM fittings are the industry's first stainless V fittings for Schedule 5 to 40 piping systems. Save on labor cost and system downtime with press fittings in a wide variety of configurations, available in sizes ½" to 4". Viega MegaPress 316 with an FKM sealing element is suitable for use with hydronic applications, compressed air, industrial gases, marine applications and more.
PAGE 129
Index Elbows Tees Adapters Flanges Caps Unions Couplings Reducers Tools 128 129 130 131 131 132 132 133 133 127 2.
PAGE 130
2.6 Elbows New New New New New 128 iega MegaPress 90° elbow V Smart Connect technology -- For use with Sch. 5 to Sch. 40 stainless steel pipe -- 316 stainless steel -- Press connection Components FKM sealing elements Model 6816 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.326 0.430 0.809 1.263 1.488 2.116 Quantity 10 10 5 1 1 1 Part No 91695 91700 91705 91710 91715 91720 DG 18 18 18 18 18 18 iega MegaPress 90° elbow V Smart Connect technology -- For use with Sch.
PAGE 131
New New New iega MegaPress 45° elbow V Smart Connect technology -- For use with Sch. 5 to Sch. 40 stainless steel pipe -- 316 stainless steel -- Press connection Components FKM sealing elements Note Must be installed with MegaPress XL rings and PressBooster/Z3 actuator Model 6826XL P1 2½ 3 4 P2 2½ 3 4 Wt [lb] 2.535 3.537 6.028 Quantity 1 1 1 Part No 98510 98515 98520 DG 18 18 18 iega MegaPress 45° street elbow V Smart Connect technology -- For use with Sch. 5 to Sch.
PAGE 132
2.6 New New New iega MegaPress t ee V Smart Connect technology -- For use with Sch. 5 to Sch. 40 stainless steel pipe -- 316 stainless steel -- Press connection Components FKM sealing elements Note Must be installed with MegaPress XL rings and PressBooster/Z3 actuator Model 6818XL P1 2½ 2½ 2½ 3 3 3 3 4 4 4 4 4 P2 2½ 2½ 2½ 3 3 3 3 4 4 4 4 4 P3 1½ 2 2½ 1½ 2 2½ 3 1½ 2 2½ 3 4 Wt [lb] 2.874 3.246 3.449 3.769 4.088 4.450 4.977 5.719 6.105 6.482 7.037 8.
PAGE 133
New New iega MegaPress a V dapter Smart Connect technology -- For use with Sch. 5 to Sch. 40 stainless steel pipe -- 316 stainless steel -- Press connection, female pipe thread Components FKM sealing element Model 6812 P ½ ¾ 1 1¼ 1½ 2 FPT ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.234 0.293 0.540 0.688 0.890 1.258 Quantity 10 10 5 1 1 1 Part No 91240 91245 91250 91255 91260 91265 DG 18 18 18 18 18 18 iega MegaPress a V dapter Smart Connect technology -- For use with Sch. 5 to Sch.
PAGE 134
2.6 New iega MegaPress c V ap Smart Connect technology -- For use with Sch. 5 to Sch. 40 stainless steel pipe -- 316 stainless steel -- Press connection Components FKM sealing element Note Must be installed with MegaPress XL rings and PressBooster/Z3 actuator Model 6856.1XL P 2½ 3 4 Wt [lb] 1.206 1.790 2.852 Quantity 1 1 1 Part No 98540 98545 98550 DG 18 18 18 Unions New iega MegaPress u V nion Smart Connect technology -- For use with Sch. 5 to Sch.
PAGE 135
New iega MegaPress c V oupling No stop Smart Connect technology -- For use with Sch. 5 to Sch. 40 stainless steel pipe -- 316 stainless steel -- Press connection Components FKM sealing elements Note Must be installed with MegaPress XL rings and PressBooster/Z3 actuator Model 6815.5XL P1 2½ 3 4 P2 2½ 3 4 Wt [lb] 1.741 2.457 3.705 Quantity 1 1 1 Part No 98360 98365 98370 DG 18 18 18 Reducers New New New iega MegaPress r educer V Smart Connect technology -- For use with Sch.
PAGE 136
2.6 V2 Actuator press jaw set -- For Ridgid standard tools, Viega MegaPress connections ½" to 2" Components V2 actuator, MegaPress jaw sizes ½" to 1", MegaPress rings sizes 1 ¼" to 2", branded soft-sided case Model 2880.71 134 for d ½–2 Wt [lb] 48.
PAGE 137
2.
PAGE 138
MegaPress CuNi 2.7 Viega offers the Viega MegaPress CuNi 90/10 IPS system for marine and industrial pipe joining applications. The Viega MegaPress CuNi system is approved for installation in a variety of applications from cooling water to fuel to fire sprinkler. It is a 90/10 copper nickel alloy that is specifically designed to stand up to the harsh environments of the sea.
PAGE 139
MegaPress CuNi Elbows Tees Adapters Flanges Unions Couplings Reducers Tools 138 139 140 140 141 141 142 143 137 2.
PAGE 140
2.7 Elbows New New iega MegaPress 90° elbow V Smart Connect technology -- For use in installations of Class 200 or Schedule 40 IPS copper nickel pipe -- CuNiFe 90/10 -- Press connection Components FKM sealing elements Model 0516 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.357 0.469 0.890 1.400 1.653 2.
PAGE 141
MegaPress CuNi New New P1 2½ 3 4 P2 2½ 3 4 Wt [lb] 2.768 3.985 6.475 Quantity 1 1 1 Part No 88120 88125 88130 DG 17 17 17 2.
PAGE 142
2.7 New iega MegaPress t ee V Smart Connect technology -- For use in installations of Class 200 or Schedule 40 IPS copper nickel pipe -- CuNiFe 90/10 -- Press connection, female pipe thread Components FKM sealing elements Model 0517.2 P1 ½ 1 1 2 2 P2 ½ 1 1 2 2 FPT ½ ½ ¾ ½ ¾ Wt [lb] 0.480 0.965 0.987 2.255 2.
PAGE 143
MegaPress CuNi P 2½ 3 4 BP 4 4 8 BPd 5½ 6 7½ Wt [lb] 9.393 10.804 15.177 Quantity 1 1 1 Part No 88700 88705 88710 DG 17 17 17 BP = bolt pattern BPd = bolt pattern diameter 2.
PAGE 144
2.7 New iega MegaPress c V oupling No stop Smart Connect technology -- For use in installations of Class 200 or Schedule 40 IPS copper nickel pipe -- CuNiFe 90/10 -- Press connection Components FKM sealing elements Model 0515.5 P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.251 0.335 0.553 0.948 1.106 1.
PAGE 145
New iega MegaPress r educer V Smart Connect technology -- For use in installations of Class 200 or Schedule 40 IPS copper nickel pipe -- CuNiFe 90/10 -- Press connection Components FKM sealing elements Note Must be installed with MegaPress XL rings and PressBooster/Z3 actuator Model 0515.2XL P1 2½ 2½ 3 3 4 4 P2 1½ 2 2 2½ 2½ 3 Wt [lb] 1.812 1.873 2.442 2.616 3.773 4.
PAGE 146
PAGE 147
2.
PAGE 148
MegaPress Press-In Branch Connector 2.8 The MegaPress Press-In Branch Connector is an innovative way to create branches from main runs or install instrumentation onto existing piping. The branch connector installs onto carbon steel pipe in sizes 1½" through 4", as well as 6", and has a ¾" FPT outlet. As with other MegaPress products, it can be installed on partially drained systems, further reducing downtime during installation.
PAGE 149
MegaPress Press-In Branch Connector Index 148 148 2.
PAGE 150
2.8 Branch connectors iega MegaPress P V ress-In Branch Connector -- For use with Sch.10 carbon steel pipe only -- Carbon steel -- Press connection, female pipe thread Components FKM sealing element Model 4812.2 for d 1½ 2 2½ 3 4 6 FPT ¾ ¾ ¾ ¾ ¾ ¾ Wt [lb] 0.454 0.452 0.458 0.452 0.445 0.441 Quantity 1 1 1 1 1 1 Part No 26800 26805 26810 26815 26820 26825 DG 12 12 12 12 12 12 iega MegaPress P V ress-In Branch Connector -- For use with Sch.
PAGE 151
Press-In B ranch Connector adapter HEX -- For use with drill chuck without SDS-plus handle -- Spare part for Press-In Branch Connector tool kit Model 4878.5 -- Steel Components Hex chuck Model 4812.28 Press-In B ranch Connector positioning guide -- Spare part for Press-In Branch Connector tool kit M odel 4878.5 -- Use with V iega MegaPress Press-In Branch Connector Model 4812.2 -- Stainless steel Model 4278.
PAGE 152
PAGE 153
3.
PAGE 154
3.1 PureFlow Press Known for forward-thinking system solutions, Viega offers complete plumbing systems for potable water. By combining the highest-rated PEX tubing on the market (according to industry standards), the revolutionary Viega ManaBloc and Viega PureFlow Press manifolds in high-performance polymer, Viega PureFlow System works together to save time, labor and cost.
PAGE 155
3.1 PureFlow Press Tubing Elbows Tees Adapters Couplings Fire sprinkler Valves Viega ManaBlocs Manifolds Stub-Outs Lav adapters Closet adapters Outlet boxes Tools Accessories 154 157 159 160 161 162 163 164 167 167 168 168 168 170 172 153 3.
PAGE 156
3.1 Tubing Viega PureFlow PEX tubing -- PEX -- Coil Technical Data PEX designation code 5306 UV resistance 6 months ASTM F876, ASTM F877 Model V5001 d ⅜ ⅜ ½ ½ ½ ½ ¾ ¾ ¾ 1 1 1 3.1 1) Version red red red red red red red red red red red red Wt [lb] 5.000 21.000 5.800 17.100 28.000 58.000 11.000 32.100 53.000 16.900 50.700 88.
PAGE 157
d ¼ ¼ ⅜ ⅜ ⅜ ½ ½ ½ ½ ¾ ¾ ¾ 1 1 1 1) L [ft] 100 500 100 500 1000 100 300 500 1000 100 300 500 100 300 500 Version white white white white white white white white white white white white white white white Wt [lb] 3.200 14.000 5.000 21.000 42.000 6.000 17.100 28.000 55.000 11.000 32.100 53.000 17.000 51.900 88.
PAGE 158
3.1 Viega PureFlow PEX tubing -- For reclaimed water -- Not suitable for potable water applications -- PEX -- Coil Technical Data PEX designation code 5006 ASTM F876, ASTM F877 Model V5009.7 3.1 Viega FostaPEX t ubing -- Only for Viega PureFlow Press fittings -- PEX/AL/PE -- Coil -- Form stable Technical Data PEX designation code 5306 UV resistance 12 months ASTM F876, ASTM F877 Model 2805US 156 d ½ ¾ 1 1) Version purple purple purple Wt [lb] 17.100 32.100 51.
PAGE 159
3.1 PureFlow Press Viega PureFlow Press 90° elbow Zero Lead -- Bronze -- Press connection Model 2816ZL P1 ½ ¾ 1 1¼ 1½ 2 P2 ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.086 0.156 0.212 0.359 0.450 1.601 Quantity 10 10 10 5 5 1 Part No 93520 93540 93560 93570 93580 93590 DG 6 6 6 6 6 6 Viega PureFlow Press 90° elbow Smart Connect technology -- Polymer -- Press connection Model V5616 P1 ⅜ ½ ¾ 1 1¼ 1½ 2 P2 ⅜ ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.023 0.029 0.047 0.080 0.171 0.220 0.
PAGE 160
3.1 P ¾ 1 Flare ¾ 1 Wt [lb] 0.543 1.002 Quantity Part No 10 97150 10 97155 DG 6 6 Viega PureFlow Press 90° tailpiece Zero Lead -- Bronze -- Press connection, female union BSP Model 2897ZL P 1½ 2 F BSP 1½ 2 Wt [lb] 0.189 3.417 Quantity Part No 1 96170 1 96172 DG 6 6 Viega PureFlow Press 90° drop ear elbow Zero Lead -- Bronze -- Press connection, female pipe thread Model 2825.5ZL P ⅜ ½ ¾ ¾ FPT ½ ½ ½ ¾ Wt [lb] 0.234 0.203 0.226 0.
PAGE 161
3.1 PureFlow Press Viega PureFlow Press tee Zero Lead -- Bronze -- Press connection Model 2818ZL P1 ½ ½ ¾ ¾ ¾ ¾ 1 1 1 1 1 1 1 1 1¼ 1¼ 1¼ 1¼ 1¼ 1½ 1½ 1½ 1½ 1½ 1½ 2 P2 ½ ½ ½ ½ ¾ ¾ ½ ½ ¾ ¾ ¾ 1 1 1 1 1 1¼ 1¼ 1¼ 1 1 1½ 1½ 1½ 1½ 2 P3 ½ ¾ ½ ¾ ½ ¾ ½ 1 ½ ¾ 1 ½ ¾ 1 ¾ 1 ¾ 1 1¼ ¾ 1 ¾ 1 1¼ 1½ 2 Wt [lb] 0.107 0.194 0.177 0.177 0.185 0.182 0.282 0.233 0.287 0.220 0.242 0.216 0.262 0.296 0.529 0.581 0.547 0.588 0.716 0.627 0.740 0.681 0.767 0.860 0.957 1.
PAGE 162
3.1 PureFlow Press tee arrestor Zero Lead -- Brass Components Water hammer arrestor Model 2894ZL P1 ½ P2 ½ Wt [lb] 0.297 Quantity Part No 10 97114 DG 6 Viega PureFlow Press adapter Zero Lead -- Bronze -- Press connection, male pipe thread Model 2811ZL P ⅜ ½ ½ ¾ ¾ ¾ ¾ 1 1 1 1¼ 1½ 2 MPT ½ ½ ¾ ½ ¾ 1 1¼ ¾ 1 1¼ 1¼ 1½ 2 Wt [lb] 0.101 0.098 0.152 0.113 0.160 0.283 0.507 0.182 0.284 0.524 0.564 0.683 1.
PAGE 163
Viega PureFlow Press adapter Zero Lead -- Bronze -- Press connection, street Note ProPress tool and jaw required Model 2813.1ZL P ½ ½ ¾ ¾ ¾ 1 1¼ 1½ 2 1) Quantity 10 10 10 10 10 10 5 5 5 Part No 97520 97525 97535 97540 97545 97560 97570 97580 975901 DG 6 6 6 6 6 6 6 6 6 Wt [lb] 0.748 Quantity Part No 5 976901 DG 6 for use with solder fittings only. P 2 1) Wt [lb] 0.064 0.094 0.079 0.101 0.154 0.175 0.305 0.436 0.696 FTG (CTS) 2 for use with V iega ProPress fittings only.
PAGE 164
3.1 Viega PureFlow Press coupling Smart Connect technology -- Polymer -- Press connection Model V5615 P1 ⅜ ½ ½ ¾ ¾ 1 1 1¼ 1¼ 1¼ 1½ 1½ 1½ 1½ 2 2 3.1 Viega PureFlow Press test plug Smart Connect technology -- Polymer -- Press connection Model V5656 P2 ⅜ ⅜ ½ ½ ¾ ¾ 1 ¾ 1 1¼ ¾ 1 1¼ 1½ 1½ 2 P ⅜ ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.022 0.024 0.027 0.034 0.040 0.055 0.068 0.101 0.112 0.151 0.118 0.133 0.165 0.190 0.270 0.
PAGE 165
Viega PureFlow Press adapter Smart Connect technology, Zero Lead -- For fire sprinkler systems -- Polymer -- Press connection, female pipe thread Components Mounting bracket Note For use with black Viega PureFlow PEX only.
PAGE 166
3.1 Viega PureFlow Press wall hydrant Zero Lead -- Chrome-plated brass -- Press connection Note Frost proof Model 2888.0ZL P ½ ¾ L [in] 10 10 Wt [lb] 1.222 1.201 Quantity Part No 5 97120 5 97121 DG 6 6 hot 6 6 8 9 12 14 cold 8 8 10 15 18 22 Wt [lb] 5.121 5.195 6.128 8.218 9.832 11.277 Quantity 1 1 1 1 1 1 Part No 49142 49143 49183 49243 49303 49363 DG 2 2 2 2 2 2 Wt [lb] 6.758 8.173 10.147 11.
PAGE 167
3.1 PureFlow Press Adapter polymer polymer polymer Port(s) 5 7 10 d ½ ½ ½ hot 2 3 4 cold 3 4 6 Wt [lb] 2.189 3.130 3.801 Quantity 1 1 1 Part No 49453 49473 49410 DG 2 2 2 Viega PureFlow Press port adapter Smart Connect technology -- For connecting distribution lines to Viega ManaBloc and Viega MiniBloc -- Polymer -- Press connection, Viega ManaBloc port connection Model V5613.1 P ⅜ ½ Port ½ ½ Wt [lb] 0.047 0.
PAGE 168
3.1 3.1 iega ManaBloc s V upply adapter Zero Lead -- For connecting FPT supply lines to Viega ManaBloc and Viega MiniBloc -- Brass -- Male pipe thread, Viega ManaBloc supply connection Model V5033ZL MPT ¾ 1 Wt [lb] 0.329 0.399 Quantity Part No 5 46646 5 46656 DG 2 2 Port cap -- For V iega ManaBloc, Viega MiniBloc -- Plastic Model V5087 d ⅜ ½ Wt [lb] 0.020 0.
PAGE 169
iega ManaBloc a V ccess panel -- Metal -- 90 minute fire rating Components (2) knurled knobs, (2) keys Note Can be mounted to open vertically or horizontally UL listed Model V5099.
PAGE 170
3.1 Lav adapters Viega PureFlow Press lav adapter Smart Connect technology -- Polymer -- Press connection, lav connection Model V5613.3 P ⅜ ½ ¾ Lav ½ ½ ¾ Wt [lb] 0.050 0.055 0.080 Quantity 10 10 5 Part No 49324 49333 49344 DG 6 6 6 Viega PureFlow Press adapter Zero Lead -- Equipped with ferrule Part No 53005 -- Bronze -- Press connection, compression Components Brass ferrule Model 2895ZL P ⅜ ½ CTS ¼ ¼ Wt [lb] 0.111 0.125 Quantity Part No 1 97112 1 97113 DG 6 6 Wt [lb] 0.
PAGE 171
Viega PureFlow Press outlet box Zero Lead -- For ice maker Components ¼ turn brass valve, water hammer arrestor Model 2872.7ZL P ½ Wt [lb] 0.980 Quantity Part No 1 97220 DG 6 Viega PureFlow Press fire-rated outlet box Zero Lead -- For ice maker Components ¼ turn brass valve, water hammer arrestor Model 2872.3 P ½ Wt [lb] 1.
PAGE 172
3.1 3.1 Box frame -- For washing machine -- Plastic Model 2885.0ZL Wt [lb] 0.160 Quantity Part No 1 97103 DG 6 Box frame -- For ice maker -- Plastic Model 2873.7ZL Wt [lb] 0.150 Quantity Part No 1 97102 DG 6 Wt [lb] 3.446 3.409 3.344 4.549 Quantity 1 1 1 1 Part No 50000 50020 50040 50060 DG 6 6 6 6 for d ½, ¾ Wt [lb] 14.
PAGE 173
3.1 PureFlow Press RP 241 compact press tool kit, ProPress or Pureflow -- For Viega ProPress connections ½" to 1¼", Viega PureFlow Press connections ⅜" to 1½" Components Ridgid RP 241, ProPress jaw sizes ½" to 1¼" OR PureFlow jaw sizes ⅜ to 1½, battery, battery charger, branded soft-sided case Model 2880.7US Press Jaws Viega PureFlow Press for d ⅜, ½, ¾, 1, 1¼, 1½ Wt [lb] 19.744 Quantity Part No 1 56022 DG 16 for d ½, ¾, 1 Wt [lb] 22.
PAGE 174
3.1 Viega PureFlow PEX tubing cutter -- For use with Viega FostaPEX tubing up to 1" -- Plastic Model 2889.2US max d 1 Wt [lb] 0.351 Quantity Part No 1 21304 DG 5 Viega PureFlow PEX tubing cutter -- For use with Viega FostaPEX tubing up to 1½" -- Plastic Model V5055 max d 1½ Wt [lb] 0.401 Quantity Part No 1 21307 DG 5 Wt [lb] 0.075 Quantity Part No 1 21317 DG 5 d ⅜ ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.009 0.012 0.015 0.025 0.053 0.065 0.
PAGE 175
CTS ⅛ ¼ ⅜ ½ O.D. ¼ ⅜ ½ ⅝ Wt [lb] 0.001 0.001 0.001 0.001 Quantity 100 100 50 100 Part No 53000 53005 53015 53020 DG 2 2 2 2 Insert stiffener -- For V iega ManaBloc compression connections, risers -- Stainless steel Model V5086 CTS ¼ ⅜ ½ ¾ O.D. ⅜ ½ ⅝ ⅞ Wt [lb] 0.003 0.003 0.005 0.010 Quantity 100 50 50 50 Part No 56100 56110 56120 56140 DG 2 2 2 2 Escutcheon Single -- Not suitable for Viega FostaPEX -- Plastic Model V5088 d ⅜ ½ Version white white Wt [lb] 0.012 0.
PAGE 176
3.1 3.1 Tubing clamp Stub-out -- Use with bracket Model 2850.4US -- Plastic Model V5041.2 for d ½ Wt [lb] 0.060 Quantity Part No 50 45770 DG 2 Bend support Snap in -- Not suitable for Viega FostaPEX -- Suitable for bracket Model 2850.4US -- Plastic Model 2850.3US for d ½ Wt [lb] 0.559 Quantity Part No 100 51021 DG 2 Bend support Drop ear -- Not suitable for Viega FostaPEX -- Plastic-coated steel Model 2850.1US for d ⅜, ½ Wt [lb] 0.
PAGE 177
Economy PEX tubing clamp -- Not suitable for Viega FostaPEX -- Plastic Model V5095 for d ⅜ ½ ¾ Wt [lb] 0.002 0.003 0.004 Quantity 100 100 50 Part No 52110 52120 52140 DG 2 2 2 Lock clip -- Plastic Model 2863US for d ⅜ ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.014 0.016 0.019 0.024 0.030 0.035 0.
PAGE 178
3.1 Zip tie -- Plastic Model V5097 Pipe support -- Not suitable for Viega FostaPEX -- Steel Model V5083 3.1 Uncoiler -- Not suitable for use with center pull coils, 1" tubing or larger Components Movable metal frame, (2) coil hubs, tube guide Note Max. coil size for ⅜" and ½" tubing is 1000 ft. Max. coil size for ¾" tubing is 500 ft. Model V5061 176 L [in] 14 d ½ ¾ 1 1¼ 1½ 2 L [ft] 10 10 10 10 10 10 Wt [lb] 0.013 Quantity Part No 100 43714 DG 2 Wt [lb] 1.300 1.999 1.869 1.825 2.
PAGE 179
3.
PAGE 180
3.2 PureFlow Crimp With the reliability and quality required for potable water, Viega PureFlow Crimp fittings are part of Viega’s complete plumbing solution. Matched with the revolutionary Viega ManaBloc water distribution system and the highest-rated PEX tubing in the industry (according to industry standards), Viega PureFlow Crimp fittings are a time-tested method for joining PEX.
PAGE 181
3.2 PureFlow Crimp Index 180 182 183 183 184 185 186 189 189 190 190 191 192 192 3.
PAGE 182
3.2 Tubing Viega PureFlow PEX tubing -- PEX -- Coil Technical Data PEX designation code 5306 UV resistance 6 months ASTM F876, ASTM F877 Model V5001 d ⅜ ⅜ ½ ½ ½ ½ ¾ ¾ ¾ 1 1 1 3.2 1) Version red red red red red red red red red red red red Wt [lb] 5.000 21.000 5.800 17.100 28.000 58.000 11.000 32.100 53.000 16.900 50.700 88.
PAGE 183
d ¼ ¼ ⅜ ⅜ ⅜ ½ ½ ½ ½ ¾ ¾ ¾ 1 1 1 1) L [ft] 100 500 100 500 1000 100 300 500 1000 100 300 500 100 300 500 Version white white white white white white white white white white white white white white white Wt [lb] 3.200 14.000 5.000 21.000 42.000 6.000 17.100 28.000 55.000 11.000 32.100 53.000 17.000 51.900 88.
PAGE 184
3.2 3.2 Viega PureFlow PEX tubing -- For reclaimed water -- Not suitable for potable water applications -- PEX -- Coil Technical Data PEX designation code 5006 ASTM F876, ASTM F877 Model V5009.7 d ½ ¾ 1 1) L [ft] 300 300 300 Version purple purple purple Wt [lb] 17.100 32.100 51.000 Quantity 1 1 1 Part No 329111 329121 329131 DG 1 1 1 center pull coil Viega PureFlow PEX tubing Sleeved -- PEX -- Coil Note HDPE sleeve ASTM F876, ASTM F877 Model V5001.
PAGE 185
Viega PEX 90° compression elbow Zero Lead -- For dishwasher, connecting ⅜" compression to ¾" hose supply connection -- Equipped with ferrule Part No 53015 -- Copper -- Hose connection Model V5053 Viega PureFlow Crimp 90° elbow -- Copper -- Crimp connection, female copper tube size Model V5021 Viega PureFlow Crimp 90° elbow -- Copper -- Crimp connection, street Model V5020 CTS ⅜ Hose ¾ Wt [lb] 0.155 Quantity Part No 1 46743 DG 2 Crimp ½ ¾ C ½ ¾ Wt [lb] 0.048 0.
PAGE 186
3.2 3.2 Viega PureFlow Crimp adapter Zero Lead -- Brass -- Crimp connection, female pipe thread Model V5012ZL Crimp ⅜ ½ ½ ¾ ¾ 1 FPT ½ ½ ¾ ¾ 1 1 Wt [lb] 0.094 0.090 0.143 0.147 1.585 0.234 Quantity 25 25 25 25 10 10 Part No 46323 46333 46334 46344 46345 46355 DG 2 2 2 2 2 2 Viega PureFlow Crimp adapter Zero Lead -- Brass -- Crimp connection, polybutylene (PB) connection Note Use Viega PureFlow Crimp ring model V5019.
PAGE 187
Viega PureFlow Crimp coupling -- PolyAlloy -- Crimp connection Model V5215 Crimp1 ⅜ ½ ½ ¾ ¾ 1 1 1 Viega PureFlow Crimp test plug -- PLS -- Crimp connection Model V5058 Crimp2 ⅜ ½ ⅜ ½ ¾ ½ ¾ 1 Crimp ⅜ ½ ¾ 1 Wt [lb] 0.004 0.006 0.006 0.010 0.012 0.019 0.021 0.024 Quantity 50 100 50 50 50 10 10 10 Part No 43402 43403 43332 43343 43404 43353 43354 43355 DG 3 3 3 3 3 3 3 3 Wt [lb] 0.003 0.004 0.007 0.
PAGE 188
3.2 Viega PureFlow Crimp stop valve Straight -- PolyAlloy -- Crimp connection, lav connection -- ¼ turn Model V5036.30 Crimp ⅜ Lav ½ Wt [lb] 0.090 Quantity Part No 10 43023 DG 3 Viega PureFlow Crimp stop valve Straight -- PolyAlloy -- Crimp connection, closet connection -- ¼ turn Model V5036.31 Crimp ⅜ ½ Closet ½ ½ Wt [lb] 0.100 0.097 Quantity Part No 10 43002 10 43003 DG 3 3 hot 6 6 6 8 8 9 9 12 12 14 14 cold 6 8 8 10 10 15 15 18 18 22 22 Wt [lb] 4.014 4.974 5.021 5.938 6.100 10.
PAGE 189
3.2 PureFlow Crimp Viega MiniBloc zoning manifold -- Crimp connection -- Blue color coded ports for cold water Components ¼ turn valves, T-handle valve key, optional red valve caps Note Does not include supply connections Model V5031.5 Adapter PolyAlloy PolyAlloy PolyAlloy PolyAlloy PolyAlloy PolyAlloy PolyAlloy Port(s) 3 4 4 6 6 8 8 d ½ ⅜ ½ ⅜ ½ ⅜ ½ Wt [lb] 1.727 1.792 1.919 2.354 2.434 3.069 3.
PAGE 190
3.2 3.2 Insert stiffener -- For V iega ManaBloc compression connections, risers -- Stainless steel Model V5086 CTS ¼ ⅜ ½ ¾ O.D. ⅜ ½ ⅝ ⅞ Wt [lb] 0.003 0.003 0.005 0.
PAGE 191
iega ManaBloc a V ccess panel -- Plastic Note Can be mounted to open vertically or horizontally Model V5099 W [in] 14 14 14 14 L [in] 18 26 30 39 max. Ports 14 16 24 36 Wt [lb] 1.350 0.050 2.434 3.249 Quantity 1 1 1 1 Part No 50718 50726 50730 50739 DG 2 2 2 2 iega ManaBloc a V ccess panel -- Metal -- 90 minute fire rating Components (2) knurled knobs, (2) keys Note Can be mounted to open vertically or horizontally UL listed Model V5099.1 W [in] 14 L [in] 40 max.
PAGE 192
3.2 Viega PureFlow Crimp 90° stub-out -- Copper -- Crimp connection, street Components Wall plate Model V5070.1 Crimp FTG (CTS) L1 [in] L2 [in] Wt [lb] ⅜ ½ 3½ 8 0.305 ½ ½ 3½ 6 0.261 ½ ½ 3½ 8 0.297 Quantity 25 25 25 Part No 44209 44227 44229 DG 2 2 2 3.2 Lav adapters Viega PureFlow Crimp lav adapter Zero Lead -- Brass -- Crimp connection, lav connection Components Plastic nut Model V5075ZL Crimp ⅜ ½ Lav ½ ½ Wt [lb] 0.059 0.
PAGE 193
Cone seal -- Spare part for Viega PureFlow Crimp closet adapter Model V5072ZL, V5257, Viega PureFlow Press closet adapter Model V5613.4 Model V5084 Viega PureFlow Crimp swivel connector -- For water heater -- Copper -- Crimp connection, female pipe thread Model V5048ZL d ½ Crimp ¾ FPT ¾ L [in] 18 Wt [lb] 0.004 Quantity Part No 100 43820 DG 2 Wt [lb] 0.554 Quantity Part No 25 46764 DG 2 3.
PAGE 194
3.2 Tools Viega PureFlow Crimp hand tool Full circle -- Soft touch Model V5082.5 for d ½ ½, ¾ ¾ 1 Wt [lb] 3.309 5.678 3.499 4.649 Quantity 1 1 1 1 Part No 41720* 41724* 41740* 41760 DG 5 5 5 5 Wt [lb] 2.439 2.459 2.559 Quantity 1 1 1 Part No 41703 41723 41744 DG 5 5 5 for d ⅜, ½, ¾ 1 Wt [lb] 0.100 0.
PAGE 195
Lav riser -- Does not include lav nut Model V5089 -- Equipped with ferrule Model V5085 -- PEX Model V5080 CTS ¼ ¼ ¼ O.D. ⅜ ⅜ ⅜ L [in] 20 30 36 Wt [lb] 0.046 0.068 0.085 Quantity 100 100 100 Part No 58120 58130 58136 DG 2 2 2 Closet riser -- Does not include ballcock nut M odel V5089.1 -- Equipped with ferrule Model V5085 -- PEX Model V5081 CTS ¼ ¼ O.D. ⅜ ⅜ L [in] 12 20 Wt [lb] 0.031 0.
PAGE 196
3.2 3.2 Bracket -- For mounting on 16" center studs -- Use with bend support snap in Model 2850.3US, tubing clamp stub-out Model V5041.2 -- Steel -- Mounting holes on 2" centers Model 2850.4US 194 d ½ L [in] 18 Wt [lb] 0.560 Quantity Part No 50 51022 DG 2 Tubing clamp Stub-out -- Use with bracket Model 2850.4US -- Plastic Model V5041.2 for d ½ Wt [lb] 0.
PAGE 197
J-clamp tubing fasteners -- Plastic Components Nail Model 2860US for d ⅜ ½ ¾ 1 Wt [lb] 0.006 0.008 0.013 0.021 Quantity 100 100 100 100 Part No 52000 52020 52040 52060 DG 2 2 2 2 Economy PEX tubing clamp -- Not suitable for Viega FostaPEX -- Plastic Model V5095 for d ⅜ ½ ¾ Wt [lb] 0.002 0.003 0.004 Quantity 100 100 50 Part No 52110 52120 52140 DG 2 2 2 Lock clip -- Plastic Model 2863US for d ⅜ ½ ¾ 1 Wt [lb] 0.014 0.016 0.019 0.
PAGE 198
3.2 3.2 Uncoiler -- Not suitable for use with center pull coils, 1" tubing or larger Components Movable metal frame, (2) coil hubs, tube guide Note Max. coil size for ⅜" and ½" tubing is 1000 ft. Max. coil size for ¾" tubing is 500 ft. Model V5061 196 Wt [lb] 70.
PAGE 199
4.
PAGE 200
Heating and Cooling Solutions Radiant heating systems have been around since 10,000 B.C., but Viega has made them more efficient, reliable and easier to install than ever. Viega offers a full line of prefabricated Climate Mats for wet installs, panels for dry installs, tubing, manifolds, mixing options and controls engineered to work together. Radiant heating and cooling solutions can reduce energy costs by up to 30% for both residential and commercial buildings.
PAGE 201
Heating and Cooling Solutions Index 200 202 203 205 206 208 212 215 217 218 219 222 223 4.
PAGE 202
Tubing Viega Barrier PEX tubing -- PEX -- Coil -- Oxygen diffusion barrier, protective outer layer Technical Data PEX designation code 5306 Chlorine resistance ratings CL5 UV resistance 6 months ASTM F876, ASTM F877, ASTM F3253, NSF 61 Model 2802US 4.
PAGE 203
Heating and Cooling Solutions Viega FostaPEX t ubing -- Only for Viega PureFlow Press fittings -- PEX/AL/PE -- Straight length -- Form stable Technical Data PEX designation code 5306 UV resistance 12 months ASTM F876, ASTM F877 Model 2806US d ½ ¾ 1 L [ft] 20 20 20 Version silver silver silver Wt [lb] 2.000 3.200 5.
PAGE 204
Lock clip -- Plastic Model 2863US for d 5/16 ⅜ ½ ¾ 1 1¼ 1½ 2 1) Wt [lb] 0.004 0.014 0.016 0.019 0.024 0.030 0.035 0.050 Quantity 100 100 100 50 50 50 25 15 Part No 58070 58071 580721 58073 58074 58075 58076 58077 DG 4 2 2 2 2 2 2 2 Suitable for Viega Barrier PEX t ubing Part No 11445, 11450 Multi-clip -- Plastic Components Mounting screw Model 2867US max d 1 2 Wt [lb] 0.029 0.090 Quantity Part No 100 52006 50 52007 DG 2 2 d ½ ⅝ Wt [lb] 0.005 0.
PAGE 205
Viega PureFlow Press 90° elbow -- Bronze -- Press connection Model 2816NG P1 ⅝ P2 ⅝ Wt [lb] 0.164 Quantity Part No 5 83530 DG 4 Viega PureFlow Press 90° elbow Smart Connect technology -- Polymer -- Press connection Model V5616 P1 ⅜ ½ ¾ 1 1¼ 1½ 2 P2 ⅜ ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.023 0.029 0.047 0.080 0.171 0.220 0.
PAGE 206
4.1 204 Viega PureFlow Press tee Zero Lead -- Bronze -- Press connection Model 2818ZL P1 ½ ½ ¾ ¾ ¾ ¾ 1 1 1 1 1 1 1 1 1¼ 1¼ 1¼ 1¼ 1¼ 1½ 1½ 1½ 1½ 1½ 1½ 2 P2 ½ ½ ½ ½ ¾ ¾ ½ ½ ¾ ¾ ¾ 1 1 1 1 1 1¼ 1¼ 1¼ 1 1 1½ 1½ 1½ 1½ 2 P3 ½ ¾ ½ ¾ ½ ¾ ½ 1 ½ ¾ 1 ½ ¾ 1 ¾ 1 ¾ 1 1¼ ¾ 1 ¾ 1 1¼ 1½ 2 Wt [lb] 0.107 0.194 0.177 0.177 0.185 0.182 0.282 0.233 0.287 0.220 0.242 0.216 0.262 0.296 0.529 0.581 0.547 0.588 0.716 0.627 0.740 0.681 0.767 0.860 0.957 1.
PAGE 207
Heating and Cooling Solutions Viega PureFlow Press adapter -- Bronze -- Press connection, male pipe thread Model 2811NG P ⅝ ⅝ MPT ½ ¾ Wt [lb] 0.119 0.165 Quantity Part No 5 80527 5 80531 DG 4 4 Viega PureFlow Press adapter Zero Lead -- Bronze -- Press connection, male pipe thread Model 2811ZL P ⅜ ½ ½ ¾ ¾ ¾ ¾ 1 1 1 1¼ 1½ 2 MPT ½ ½ ¾ ½ ¾ 1 1¼ ¾ 1 1¼ 1¼ 1½ 2 Wt [lb] 0.101 0.098 0.152 0.113 0.160 0.283 0.507 0.182 0.284 0.524 0.564 0.683 1.
PAGE 208
4.1 iega ProPress insert stiffener V -- For V iega ProPress 90° extended street elbow -- Suitable for Viega ProPress 90° extended street elbow Model 2947 -- Bronze Model 2946 d ¾ Wt [lb] 0.046 Quantity Part No 5 16423 DG 4 Viega PureFlow Press adapter -- Bronze -- Press connection, female copper tube size Model 2813.5NG P ⅝ ⅝ C ½ ¾ Wt [lb] 0.072 0.
PAGE 209
Heating and Cooling Solutions P1 ⅜ ½ ½ ¾ ¾ 1 1 1¼ 1¼ 1¼ 1½ 1½ 1½ 1½ 2 2 P2 ⅜ ⅜ ½ ½ ¾ ¾ 1 ¾ 1 1¼ ¾ 1 1¼ 1½ 1½ 2 Wt [lb] 0.041 0.048 0.052 0.070 0.073 0.113 0.131 0.187 0.210 0.260 0.238 0.246 0.289 0.317 0.491 0.
PAGE 210
Viega PureFlow Press test plug Smart Connect technology -- Polymer -- Press connection Model V5656 P ⅜ ½ ¾ 1 1¼ 1½ 2 Wt [lb] 0.011 0.015 0.022 0.038 0.082 0.095 0.154 Quantity 25 25 25 10 5 5 1 Part No 49722 49723 49744 49765 49770 49780 49790 DG 6 6 6 6 6 6 6 Manifold -- Equipped with air bleeder Model 2878.914, purge valve Model 2878.915, supply flow meter valve Model 2878.920, supply shutoff balancing valve Model 2878.
PAGE 211
Heating and Cooling Solutions Manifold expansion set -- For stainless steel manifold shutoff / balancing -- Suitable for manifold ball valve set Model 2877.2, manifold Model 2879 -- Stainless steel -- Union connection, female pipe thread Components (2) 1¼" MPT x 1" MPT adapter, (2) gaskets, (2) expansion nipples Model 2877.4 d Union FPT Outlet(s) 1¼ 1¼ 1 1 Expansion nipple -- For connecting stainless steel manifolds -- Nickel-plated brass -- Male pipe thread Model 2878.922 DG 4 Wt [lb] 0.
PAGE 212
4.
PAGE 213
Heating and Cooling Solutions Manifold -- Equipped with shutoff / balancing valve Model 2834.7US -- Type L copper -- Solder inlet connection, PureFlow Press outlet connection Components Brass valves Model 2834.9US Outlet(s) 12 12 12 12 d 1½ 1½ 2 2 P ⅝ ¾ ⅝ ¾ gpm 32 32 45 45 Wt [lb] 14.116 13.906 16.295 15.721 Quantity 1 1 1 1 Part No 17223 17224 17204 17205 DG 4 4 4 4 Manifold -- Equipped with shutoff valve Model 2834.
PAGE 214
Manifold cabinet -- Suitable for manifold Model 2804, 2879 -- Galvanized steel, epoxy powder-coated finish Model 2879.6US Lock assembly -- Suitable for manifold cabinet Model 2879.6US Components (2) keys Note Part No 15802 requires two locks. Model 2857.7US W [in] 21 27 45 H [in] 30 30 30 D [in] 4½ 4½ 4½ Wt [lb] 25.993 31.991 45.987 Quantity 1 1 1 Part No 15800 15801 15802 DG 4 4 4 Wt [lb] 0.150 Quantity Part No 1 15217 DG 4 Wt [lb] 3.
PAGE 215
Heating and Cooling Solutions Pump and boiler relay Components 120 VAC supply, 24 VAC transformer, control pump and boiler contact outputs with dry or powered input signal Model 2876.0US Wt [lb] 1.040 Quantity Part No 1 18033 DG 4 V 24 Wt [lb] 0.250 Quantity Part No 1 18050 DG 4 L [ft] 10 Wt [lb] 0.200 Quantity Part No 1 18051 DG 4 Thermostat Heat/cool non programmable -- For 1 stage heat / 1 stage cool -- Suitable for zone control Model 2874.7US, powerhead Model 2877.
PAGE 216
Powerhead -- Suitable for manifold Model 2804, digital thermostat M odel 2874.5US, zone control Model 2874.7US, thermostat heat/cool non programmable Model 2878.6, thermostat heat/cool programmable Model 2878.7, thermostat m ultistage heat/cool programmable Model 2878.8, manifold Model 2879 Model 2877.7 Wire 2 4 4.1 Powerhead -- Suitable for manifold Model 2804, 2879 Model 2877.8 V 0‑10VDC Wt [lb] 0.300 0.350 Quantity Part No 1 15070 1 15069 DG 4 4 Wt [lb] 0.
PAGE 217
Heating and Cooling Solutions New Wi-Fi Snow Melt Control -- For use with snow/ice sensor and snow/ice sensor housing, slab sensor and aerial snow sensor, or slab sensor only -- Mobile app for iOS and Android, automatic storm prediction via weather data, automatic software updates via the cloud, zoning (priority, tracking) Components Microcontroller, outdoor sensor, two universal sensors Model 2872.5US Snow/Ice sensor -- Spare part for Wi-Fi Snow Melt Control Model 2872.
PAGE 218
Multi-run access panel -- For5/16" Viega Barrier PEX, multiple supply and return lines -- Suitable for Viega Barrier PEX tubing Part No 11400, 11405 -- Plywood panel Model 2810.71U L [in] 12 W [in] 7 Wt [lb] 0.562 Quantity Part No 6 14055 DG 4 Multi-run ninety panel -- For5/16" Viega Barrier PEX, multiple supply and return lines -- Suitable for Viega Barrier PEX tubing Part No 11400, 11405 -- Plywood panel Model 2810.72U L [in] 12 W [in] 12 Wt [lb] 1.
PAGE 219
Heat transfer plate -- Suitable for Viega Barrier PEX tubing Part No 11415, 11418, 11425, 11427, 11428, 11430, 11435, 11436, 11440 -- Aluminum Model 2857US L [in] 19 19 Wt [lb] 0.186 0.180 Quantity Part No 100 15205 100 15206 DG 4 4 d 5/16 Wt [lb] 0.002 Quantity Part No 100 15112 DG 4 Viega Climate Mat -- For in slab applications -- Pre-engineered CAN/ULC S101, CAN/ULC S102.2 Model 2809.1US d O.C.
PAGE 220
Hydronic mixing block -- Circulator, control, mixing valve Components 3-speed circulator, control, air vent, adapter fittings, bracket and two sensors Model 2887.3 Wt [lb] 8.488 Quantity Part No 1 56160 DG 4 Mixing valve Three way -- Female pipe thread -- Regulates supply fluid temperature to the system from the source, manual or electric control Model 2876.3US FPT ¾ 1 1¼ 1½ 2 Wt [lb] 1.095 1.631 2.374 3.884 5.
PAGE 221
Heating and Cooling Solutions Viega PureFlow Press hand tool -- Ratcheting design, color coded handles Model 2882US d 5/16 ⅜ ½ ⅝ ¾ 1 Version black green yellow red blue orange Wt [lb] 3.394 3.446 3.409 3.459 3.344 4.549 Quantity 1 1 1 1 1 1 Part No 60010 50000 50020 50030 50040 50060 DG 4 6 6 4 6 6 Viega PureFlow Press starter tool set -- Color coded handles Components Viega Pureflow Press hand tool sizes ½" and ¾", tubing cutter Model 2880.2 for d ½, ¾ Wt [lb] 14.
PAGE 222
RP 340 standard press tool -- For Viega PureFlow Press connections ½" to 2", Viega ProPress connections ½" to 4", Viega MegaPress connections ½" to 4" Components Ridgid 340 tool, battery, battery charger, hard case Model 2980.71 for d Jaws not included Wt [lb] 22.854 Quantity Part No 1 56024 DG 16 PureFlow press jaw Compact -- For Viega P ressgun Picco 6, Ridgid compact tools, PEX tubing -- Steel Model 2884.7US Press Jaws ⅜ ½ ⅝ ¾ 1 1¼ 1½ Wt [lb] 2.434 2.359 2.299 2.359 1.600 2.664 2.
PAGE 223
Heating and Cooling Solutions Stapler -- For foam board insulation -- Suitable for staple Model 2890.0US, 2890.3US -- Manual Model 2891.1US Wt [lb] 8.947 Quantity Part No 1 21432 DG 4 Staple -- Suitable for stapler Model 2891.1US -- Plastic Note Smallest sellable quantity is 1 box of 300. Model 2890.0US L [in] 2½ Wt [lb] 0.006 Quantity Part No 300 15312 DG 4 Staple -- Suitable for stapler Model 2891.1US -- Plastic Note Smallest sellable quantity is 1 box of 300. Model 2890.
PAGE 224
Blade -- Suitable for Viega PureFlow PEX tubing cutter Model V5055 -- Steel Model V5055.1 Wt [lb] 0.075 Quantity Part No 1 21317 DG 5 Circulator -- Cast iron -- 3-speed, direct drive, wet rotor, inline Model 2801.1US Circulator low head Wt [lb] 7.248 Quantity Part No 1 12126 DG 4 Circulator -- Cast iron -- 3-speed, direct drive, wet rotor, inline Model 2801.9US Circulator high head Wt [lb] 10.247 Quantity Part No 1 12127 DG 4 d ¾ 1 1¼ 1½ Wt [lb] 2.234 2.209 1.915 1.
PAGE 225
Heating and Cooling Solutions Pressure differential valve -- Brass -- Female pipe thread Model 2871.8US FPT 1 1¼ Wt [lb] 2.209 2.611 Quantity Part No 1 20102 1 20103 DG 4 4 Wt [lb] 0.015 Quantity Part No 1 15171 DG 4 Wt [lb] 0.280 Quantity Part No 1 16432 DG 4 Temp [°F] 32–176 Wt [lb] 0.090 Quantity Part No 1 15175 DG 4 Wt [lb] 0.090 Quantity Part No 1 15176 DG 4 Wt [lb] 0.330 Quantity Part No 1 15177 DG 4 Wt [lb] 0.
PAGE 226
Return valve seat Short -- For stainless steel manifold shutoff / balancing -- Spare part for manifold Model 2879 -- Nickel-plated brass -- Male pipe thread, SVC Model 2878.917 SVC Supply valve seat -- For stainless steel manifold shutoff / balancing / flow meter -- Spare part for manifold Model 2804 -- Nickel-plated brass -- Male pipe thread, SVC Model 2878.
PAGE 227
Heating and Cooling Solutions Purge valve -- For 1½" and 1" brass manifolds -- Brass -- National Pipe Thread, hose connection Model 1069SV NPT ½ Wt [lb] 0.234 Quantity Part No 1 15032 DG 4 Air vent -- For 1½" and 1" brass manifolds -- Brass Components Air vent, air bleeder Model 1028SV MPT ⅜ Wt [lb] 0.476 Quantity Part No 1 15033 DG 4 Wt [lb] 0.335 Quantity Part No 1 16017 DG 4 Wt [lb] 0.100 Quantity Part No 1 16018 DG 4 L [ft] 6 Wt [lb] 0.
PAGE 228
iega ProPress b V imetallic thermometer Thermometer -- Use with Viega ProPress drain valve and temperature port Model 2934.8ZL Note Only for use with Viega ProPress drain valve and temperature port Model 2876.6US Wt [lb] 0.230 Quantity Part No 1 13266 DG 4 Wt [lb] 0.140 Quantity Part No 1 13267 DG 4 Wt [lb] 0.160 Quantity Part No 1 15003 DG 4 Wt [lb] 0.136 Quantity Part No 1 15004 DG 4 Wt [lb] 0.258 Quantity Part No 1 15005 DG 4 Wt [lb] 0.
PAGE 229
Hydronic mixing block supply fitting #1 -- For replacement of hydronic mixing block supply fitting #1 -- Spare part for hydronic mixing block Model 2887.3 -- Plastic Note Order gasket and O-ring separately Model 2887.31 Hydronic mixing block return fitting #2 -- For replacement of hydronic mixing block return fitting #2 -- Spare part for hydronic mixing block Model 2887.3 -- Plastic Note Order gasket and O-ring separately Model 2887.
PAGE 230
Hydronic mixing block T&P sensor -- Spare part for hydronic mixing block Model 2887.3 Note Order T&P sensor O-ring seperately Model 2887.34 Hydronic mixing block T&P sensor O-ring -- For T&P sensor -- Spare part for hydronic mixing block Model 2887.3, hydronic mixing block T&P sensor Model 2887.34 Model 2887.35 Terminal block -- For use with hydronic mixing block -- Spare part for hydronic mixing block Model 2887.3 -- Plastic Model 2887.4 4.
PAGE 231
4.
PAGE 232
GeoFusion Viega GeoFusion socket fusion fittings are a reliable, high-quality option for ground-source heat-exchange applications. With 25 years of experience in socket-fusion-fitting production, Viega GeoFusion fittings provide installers with the superior products they need to connect open- and closed-loop geothermal and hydronic distribution piping systems.
PAGE 233
GeoFusion Index 232 232 233 234 234 234 4.
PAGE 234
Elbows Viega GeoFusion 90° elbow -- High density polyethylene (HDPE) -- Socket fusion Model V9016 IPS1 ¾ 1 1 1¼ 1¼ 1¼ 1½ 2 2 IPS2 ¾ ¾ 1 ¾ 1 1¼ 1½ 1¼ 2 Wt [lb] 0.075 0.071 0.122 0.188 0.185 0.200 0.240 0.471 0.525 Quantity 75 50 50 100 100 75 50 25 25 Part No 39060 39061 39062 39063 39064 39065 39067 39068 39069 DG 11 11 11 11 11 11 11 11 11 Viega GeoFusion 90° elbow -- High density polyethylene (HDPE) -- Socket fusion, male pipe thread Model V9016.
PAGE 235
GeoFusion Viega GeoFusion header tee -- High density polyethylene (HDPE) -- Socket fusion, stub socket fusion Model V9018.2 IPS1 1 1 1¼ 1¼ 1¼ 1¼ Stub 1 1 1 1 1¼ 1¼ IPS2 ¾ 1 ¾ 1 ¾ 1 Wt [lb] 0.269 0.263 0.315 0.309 0.333 0.313 Quantity 25 25 25 25 25 50 Part No 39140 39141 39142 39143 39144 39145 DG 11 11 11 11 11 11 Viega GeoFusion adapter tee -- High density polyethylene (HDPE) -- Socket fusion, male nominal thread Model V9018.8 IPS1 1¼ IPS2 1¼ MNT 1 Wt [lb] 0.
PAGE 236
Viega GeoFusion swivel adapter -- High density polyethylene (HDPE) -- Socket fusion, swivel nut Model V9049 IPS ¾ 1 1¼ Swivel 1 1 1 Wt [lb] 0.320 0.354 0.463 Quantity 25 25 25 Part No 39180 39181 39182 DG 11 11 11 Viega GeoFusion swivel adapter -- Brass -- Male pipe thread, swivel nut Model V9013.1 MPT 1 1 1 Swivel ¾ 1 1¼ Wt [lb] 0.306 0.385 0.460 Quantity 10 10 50 Part No 50648 50647 48420 DG 11 11 11 Wt [lb] 0.051 0.038 0.049 0.157 0.
PAGE 237
5.
PAGE 238
Flushing Systems Viega extends its excellent reputation for providing high-quality behind-the-wall piping systems with a concealed flushing system. Our products in front of the wall are also of exceptional quality, because Viega stands for tried-and-tested engineering and intelligent, versatile solutions. Viega has teamed with renowned designers to develop a wide range of flush plates that utilize multiple materials and finishes.
PAGE 239
Flushing Systems Index 238 240 246 5.
PAGE 240
Carriers iega Eco Plus WC carrier V 2 x 6, reduced flush -- For Visign flush plates, manual or touchless actuation -- Flush actuation from the front, dual flush technology, adjustable ceramic height, barrier-free Components Powder-coated steel frame, concealed cistern, 3" PP drain elbow, fernco coupling, mounting hardware for 2 x 6 wood or metal studs, bowl mounting kit, trim guards Cistern Components Pre-mounted angle stop with ½ NPT supply connection, fill valve set, flush valve kit Technical Data sm
PAGE 241
Flushing Systems iega Eco Plus WC carrier V 2x4 -- For Visign flush plates, manual or touchless actuation -- Flush actuation from the front, dual flush technology, adjustable ceramic height, barrier-free Components Powder-coated steel frame, concealed cistern, 3" PP drain elbow, fernco coupling, mounting hardware for 2 x 4 wood or metal studs, bowl mounting kit, trim guards Cistern Components Pre-mounted angle stop with ½ NPT supply connection, fill valve set, flush valve kit Technical Data sm.
PAGE 242
iega Eco Plus bidet carrier V -- For wall-mounted bidet Components Powder-coated steel frame, height adjustable drain, mounting hardware for wood or metal studs, adjustable bowl height and bowl mounting hardware, adjustable drain elbow holder Model 8167.6US Wt [lb] 22.073 Quantity Part No 1 52740 DG 13 Wt [lb] 0.771 0.756 0.793 Quantity 1 1 1 Part No 54660* 54665* 54670* DG 13 13 13 Wt [lb] 0.677 0.701 0.659 0.
PAGE 243
Flushing Systems Flush plate touchless Visign for Style -- Plastic -- With glow in the dark finish -- Touchless flush actuation from front or top, dual flush technology, with Viega Hygiene+ function Components Bowden cable unit, power pack (cable length 41"), mounting frame, mounting hardware Technical Data sm. flush vol. factory setting approx. 0.8 gallon full flush vol. factory setting approx. 1.6 gallon V 100–240 V AC/50–60 Hz Model 8315.3US cover plate jet black plastic Wt [lb] 2.
PAGE 244
Flush plate Visign for More 104 -- Metal -- Manual flush actuation from front, dual flush technology Components Bowden cable unit, mounting frame, mounting hardware Note Shown in Stainless Steel Model 8354.1US cover plate chrome colored aluminum aluminum matte chrome stainless steel colored aluminum actuator chrome colored aluminum aluminum matte chrome stainless steel colored aluminum Wt [lb] 2.314 2.211 2.237 Quantity 1 1 1 Part No 54770 54775 54780 DG 13 13 13 Wt [lb] 2.612 2.612 2.
PAGE 245
Flushing Systems Flush plate touchless Visign for More 100 -- Glass -- Touchless flush actuation from front or top, dual flush technology, with Viega Hygiene+ function Components Bowden cable unit, mounting frame, mounting hardware, battery compartment, 4 AA batteries Technical Data sm. flush vol. factory setting approx. 0.8 gallon full flush vol. factory setting approx. 1.6 gallon Note Shown in Black Glass Model 8352.3US cover plate black glass light gray glass Wt [lb] 3.161 3.
PAGE 246
Flush plate Visign for More 100 -- Use with Viega Eco Plus urinal carrier Model 8164.5US -- Metal, glass -- Manual flush actuation from front Components Flush plate, cartridge valve, mounting frame, mounting hardware Note Shown in Black Glass Model 8351.2US cover plate chrome colored aluminum aluminum matte chrome chrome colored aluminum chrome colored aluminum actuator chrome colored aluminum aluminum matte chrome light gray glass black glass Wt [lb] 2.034 1.990 1.929 1.
PAGE 247
Flushing Systems Cover panel Visign for Public -- Metal -- Can be screwed at 2 sides, vandalism proof, without function Components Mounting frame, mounting hardware Model 8326.9US cover plate brushed stainless steel Wt [lb] 1.444 Quantity Part No 1 54585 DG 13 Installation frame Visign for More -- For tile-level installation of the urinal flush plate -- Suitable for flush plate Visign for More 100 Model 8352.1US, flush plate Visign for More 104 Model 8354.
PAGE 248
Spare parts Protective plug -- For drain elbow -- Plastic Model 8010.2US DN 90 Protective plug -- For flushing pipe elbow -- Plastic Model 8310.5US d 4 d 2 Trim guard -- Plastic Components Protective cover Model 8310.6US W [in] 9½ H [in] 4½ Version yellow Wt [lb] 0.143 Quantity Part No 1 54690 DG 13 Wt [lb] 0.073 Quantity Part No 1 54840 DG 13 Wt [lb] 0.326 Quantity Part No 1 54835* DG 13 Wt [lb] 0.
PAGE 249
Flushing Systems Seal set -- For Viega concealed cisterns Components O-ring set for drain socket of concealed cistern, o-ring for corner valve, seals for flush valve, seals for flush valve seat, filling valve and flushing pipe elbow Model 8310.2US Fill valve set -- Suitable for Viega Eco Plus WC carrier 2 x 6 reduced flush Model 8108.4US, Viega Eco Plus WC carrier 2 x 6 Model 8180US -- Plastic Components Fill valve, flexible hose, fill valve bracket Model 8310.
PAGE 250
Actuating pin set -- For manual flush plates -- Spare part for flush plate Standard 1 Model 8180.1US, flush plate Visign for Style 10 Model 8315.1US, flush plate Visign for Style 13 Model 8333.1US, flush plate Visign for Style 14 Model 8334.1US Model 8310.3US M 8 Power pack -- Spare part for flush plate Visign for Public 5 Model 8326.1US, flush plate touchless Visign for More 100 Model 8352.2US Technical Data V 100–240 V AC/50–60 Hz Model 8350.
PAGE 251
Flushing Systems Connection set -- For height adjustment up to 25 mm -- Plastic Components Flushing pipe with flush pipe connector, toilet connection supports with lip seal, threaded bolts Note Without warranty, can lead to reduced, non-standard flush and drainage performance! Model 8094US DN 90 Wt [lb] 1.591 Quantity Part No 1 54675 DG 13 Flushing Systems 90° connection elbow Toilet -- PE Components EPDM sealing element Model 3816.1US DN 90 Wt [lb] 0.
PAGE 252
PAGE 253
6.
PAGE 254
Tools Viega offers a variety of press tools and jaws for every fitting size across every system. Save 50 to 90 percent on labor costs and system downtime by using a battery-powered press tool to make connections in seconds. With Viega, you’ll get a whole solution from start to finish including fittings, jaws/rings and press tools. Tool kits are available with batteries, chargers and cases. Tools come in standard or compact sizes, depending on usage and needs.
PAGE 255
Tools Index 256 257 259 260 261 261 262 6.
PAGE 256
VIEGA TOOL MATRIX Viega Pressgun Picco 6 Ridgid 240/241 Jaws ‘C1’ Actuator and Rings ProPress* ½" - 1¼" ½" - 1¼" MegaPress* ½" - ¾" PureFlow Press ⅜" - 1½" Viega Hand Tools 5/16" - 1" ‘P1’ Actuator and Rings SeaPress 12-35 mm This chart lists all the tools, jaws, actuators and rings available through Viega LLC that are compatible with Viega products.
PAGE 257
Viega Pressgun 6 Jaws ‘V1’ Actuator and Rings ‘V2’ Actuator and Rings Jaws ‘V2’ Actuator and Rings ½" - 2" ½" - 1¼" 1½" - 4” ½" - 2" 1½" - 4" 1¼" - 2" ½" - 1" ½" - 1" Milwaukee M18 Force Logic Long Throw* Ridgid 340 ½" - 2" Booster ‘Z3’ Actuator and Rings 1¼" - 2" 2½" - 4" 2½" - 4" ½" - 2" ‘Z1’ Actuator and Rings ‘Z2’ Actuator and Rings ‘Z1’ Actuator and Rings ‘Z2’ Actuator and Rings 12-35 mm 42-108 mm 12-35 mm 42-108 mm *ProPress includes: ProPress, ProPress 304 FKM, ProPress
PAGE 258
Power Tools New 6.1 New 256 Pressgun 6 pressing tool -- For Viega PureFlow Press connections ½" to 2", Viega ProPress connections ½" to 4", Viega MegaPress connections ½" to 2" -- Not for use with MegaPress XL PressBooster and Viega MegaPress Z3 Actuator Components Pressgun 6, battery, battery charger Model 2995.
PAGE 259
Tools RP 241 compact press tool kit, ProPress or Pureflow -- For Viega ProPress connections ½" to 1¼", Viega PureFlow Press connections ⅜" to 1½" Components Ridgid RP 241, ProPress jaw sizes ½" to 1¼" OR PureFlow jaw sizes ⅜ to 1½, battery, battery charger, branded soft-sided case Model 2880.7US Press Jaws ProPress Viega PureFlow Press for d ½, ¾, 1, 1¼ ⅜, ½, ¾, 1, 1¼, 1½ Wt [lb] 19.195 19.
PAGE 260
New V2 Actuator press jaw set -- For Ridgid standard tools, Viega MegaPress connections ½" to 2" Components V2 actuator, MegaPress jaw sizes ½" to 1", MegaPress rings sizes 1 ¼" to 2", branded soft-sided case Model 2880.71 for d ½–2 Wt [lb] 48.986 Quantity Part No 1 56013 DG 16 XL-C ProPress ring kit -- For Ridgid standard tools, Viega ProPress connections 2½" to 4" -- Phosphated steel Components V2 actuator, ProPress XL-C rings sizes 2½" to 4", hard case Model 2999.
PAGE 261
Tools Z2 actuator press ring set (3) -- Phosphated steel -- Metric size Components Z2 actuator, (3) press rings, case Note Use with Ridgid press tools RP 320, RP 330, RP 340 Model 2497.3XL for d 76.1–108 Wt [lb] 38.283 Quantity Part No 1 562 854 DG 7 Wt [lb] 10.138 Quantity Part No 1 622 664 DG 7 Wt [lb] 44.300 Quantity Part No 1 362 959 DG 7 P1 actuator press ring set -- Phosphated steel -- Metric size Components P1 actuator, (6) press rings sizes 12 mm to 35 mm, case Model 2496.
PAGE 262
Viega PureFlow Press starter tool set -- Color coded handles Components Viega Pureflow Press hand tool sizes ½" and ¾", tubing cutter Model 2880.2 for d ½, ¾ Wt [lb] 14.716 Quantity Part No 1 56000 DG 6 Viega PureFlow Press complete heating tool set -- Color coded handles Components Viega Pureflow Press hand tool sizes ⅜" to 1", prep tool Model 2880.5US for d ⅜, ½, ⅝, ¾, 1 Wt [lb] 26.992 Quantity Part No 1 56030 DG 4 for d ⅜, ½, ¾, 1 Wt [lb] 25.
PAGE 263
Tools Coilers Decoiler drum and base -- For use with Viega Barrier PEX tubing sizes ½" to ¾" and lengths 800' to 2000' Note Does not include Viega PureFlow PEX tubing Model 2875.6US max d ¾ Wt [lb] Quantity Part No 129.963 1 21310 DG 4 Decoiler Compact -- For use with Viega Barrier PEX tubing sizes 5/16" to ¾" and lengths 250' to 1200' -- Folds for easy transport Model 2889.6US max d ¾ Wt [lb] 31.991 Quantity Part No 1 21316 DG 4 Wt [lb] 70.
PAGE 264
Accessories XL PressBooster Hard case -- For use with MegaPress XL PressBooster and Viega MegaPress Z3 Actuator -- Spare part for Viega MegaPress XL PressBooster Model 4896.2XL -- Foam lined lid Model 2201US Wt [lb] Quantity Part No 1 26935 DG 16 Wt [lb] Quantity Part No 1 26940 DG 16 Wt [lb] Quantity Part No 1 26945 DG 16 Wt [lb] Quantity Part No 1 26950 DG 16 Wt [lb] Quantity Part No 1 26965 DG 16 Wt [lb] 0.
PAGE 265
Tools Press-In B ranch Connector adapter SDS-plus drive -- Spare part for Press-In Branch Connector tool kit M odel 4878.5 -- Steel Model 4878.91 Press-In B ranch Connector tool -- For installing V iega MegaPress press-in branch connectors -- Spare part for Press-In Branch Connector tool kit M odel 4878.5 -- Steel Model 4878.9 Press-In B ranch Connector bolt -- Spare part for Press-In Branch Connector tool kit M odel 4878.
PAGE 266
Staple -- Suitable for stapler Model 2891.1US -- Plastic Note Smallest sellable quantity is 1 box of 300. Model 2890.3US 6.1 Staple -- Suitable for pneumatic staple gun Model 2889.7US -- Galvanized steel Note Smallest sellable quantity is 1 box of 10000. Model 2889.8US 264 L [in] 1½ W [in] 1 D [in] 1¼ Wt [lb] 0.005 Quantity Part No 300 15313 DG 4 Wt [lb] 0.
PAGE 267
PART NO. MODEL NO.
PAGE 268
MODEL NO. Model No. 0103 0107XL 0108 0108XL 0113.1XL 0113.1XL 0113.3 0113.3 0186XL 0186XL 0186XL 0311 0311.5 0312 0312.5 0315 0315.1 0315.1XL 0315.3 0315.5XL 0315XL 0316 0316.1 0316.1XL 0316XL 0317.2 0317.2XL 0317.5 0318 0318XL 0326 0326.1 0326.1XL 0326XL 0359.3 0359.3XL 0365 0365.5 0511 0512 0515 0515.1 0515.1XL 0515.2 0515.2XL 0515.5 0515.5XL 0515XL 0515XL 0516 0516.1 0516.1XL 0516XL 0516XL 0517.2 0517.2XL 0518 0518XL 0518XL 0526 0526.1 0526.1XL 0526XL 0559 0559.
PAGE 269
2926.1 2928 2928.7ZL 2934.8ZL 2934.8ZL 2946 2947 2947 2956 2957ZL 2957ZL 2959.5ZL 2959.7 2959.7 2959.7 2959.7 2959.7 2959.7 2959.7 2959.7 2960ZL 2962ZL 2963.9 2963.9 2965ZL 2967ZL 2969 2970.80 2970.80 2970.96 2971.1ZL 2971.3ZL 2971.4ZL 2971.6ZL 2971.8 2971.96 2973 2973.1 2973.3 2973.8 2973.96 2974ZL 2975.2 2976.1ZL 2980.7 2980.7 2980.7 2980.7 2980.71 2980.71 2980.71 2980.71 2980.71 2980.71 2980.71 2980.71 2980.71 2980.71 2980.71 2980.71 2980.71 2980.71 2981.3ZL 2981.3ZL 2986 2986 2986 2989 2989 2989 2989.
PAGE 270
MODEL NO. Model No. V5001.5 V5002 V5002 V5002.5 V5002.5 V5003 V5003 V5003.5 V5003.5 V5004 V5004 V5009 V5009 V5009.1 V5009.1 V5009.5 V5009.5 V5009.51 V5009.51 V5009.7 V5009.7 V5009.8 V5009.8 V5011ZL V5012ZL V5014ZL V5015ZL V5016ZL V5017ZL V5018ZL V5019.9 V5020 V5021 V5023ZL V5024ZL V5026ZL V5027ZL V5030.5 V5030.51 V5031.2 V5031.22 V5031.5 V5032ZL V5032ZL V5033ZL V5033ZL V5034ZL V5036.10 V5036.10 V5036.30 V5036.31 V5037ZL V5038 V5038 V5039.1 V5039.7 V5039.7 V5041.0 V5041.1 V5041.2 V5041.2 V5041.
PAGE 271
11400 11405 11415 11418 11425 11427 11428 11430 11435 11436 11440 11445 11450 11455 11457 11458 11460 11462 11465 11470 11475 11480 11485 11500 11505 11510 11515 11520 12121 12123 12125 12126 12127 12128 12151 12152 12153 13265 13266 13267 14005 14021 14025 14035 14050 14055 14060 14543 14568 15003 15004 15005 15032 15033 15044 15053 15054 15055 15056 15060 15063 15065 15066 15068 15069 15070 15104 15106 15106 15106 15107 15107 15107 15108 15108 15108 15111 15111 15111 15112 15116 15117 15118 15170 15171 15
PAGE 272
PART NO. Part No.
PAGE 273
26575 26580 26585 26590 26595 26600 26605 26610 26615 26620 26625 26630 26635 26640 26645 26650 26655 26660 26665 26670 26675 26680 26685 26690 26695 26700 26705 26710 26715 26720 26725 26730 26735 26740 26745 26750 26755 26760 26765 26770 26775 26780 26785 26800 26805 26810 26815 26820 26825 26830 26830 26835 26835 26837 26837 26840 26840 26845 26845 26850 26850 26855 26855 26860 26865 26870 26875 26880 26885 26890 26890 26895 26895 26900 26900 26905 26905 26910 26910 26915 26915 26920 26920 26925 26925 26
PAGE 274
PART NO. Part No.
PAGE 275
49357 49358 49358 49363 49366 49378 49378 49398 49398 49402 49402 49403 49403 49404 49404 49405 49405 49407 49407 49408 49408 49409 49409 49410 49414 49416 49418 49433 49433 49434 49434 49443 49443 49453 49473 49520 49520 49533 49533 49535 49535 49540 49540 49543 49543 49544 49544 49545 49545 49553 49553 49554 49554 49560 49560 49570 49570 49580 49580 49590 49590 49607 49722 49722 49723 49723 49744 49744 49754 49754 49755 49755 49765 49765 49770 49770 49774 49774 49775 49775 49780 49780 49790 49790 49854 49
PAGE 276
PART NO. Part No.
PAGE 277
79850 79855 79860 79875 79876 79901 79901 79902 79902 79903 79903 79920 79923 79925 79928 79930 79933 79935 79938 79940 79943 79948 79950 79970 79975 79980 80010 80015 80020 80025 80030 80035 80040 80045 80050 80055 80060 80061 80063 80064 80065 80067 80068 80069 80070 80071 80073 80074 80075 80076 80077 80078 80080 80081 80082 80083 80085 80090 80092 80095 80100 80105 80110 80115 80120 80125 80126 80127 80160 80165 80170 80175 80180 80185 80190 80195 80200 80205 80210 80215 80220 80225 80230 80235 80240 80
PAGE 278
PART NO. Part No.
PAGE 279
89408 89409 89410 89413 90005 90010 90015 90020 90025 90030 90035 90040 90045 90050 90055 90060 90065 90070 90075 90080 90085 90090 90095 90100 90105 90110 90115 90120 90125 90130 90135 90140 90145 90150 90155 90160 90165 90170 90175 90180 90185 90190 90195 90200 90205 90210 90215 90220 90225 90230 90235 90240 90245 90250 90255 90260 90265 90270 90275 90280 90285 90290 90295 90300 90305 90310 90315 90320 90325 90330 90335 90340 90345 90350 90355 90360 90365 90370 90375 90380 90385 90390 90395 90400 90405 90
PAGE 280
PART NO. Part No.
PAGE 281
F O L L O W U S O N S O C I A L @ V I E G A L L C
PAGE 282
viega.us Connected in quality.
PAGE 283
Viega Terms and Conditions The following standard terms and conditions apply to all sales of products by Viega LLC unless otherwise modified in the order confirmation or delivery note. Any contrary terms in purchase orders or purchaser standard terms and conditions are rejected and acceptance of the order by Viega LLC is conditioned upon these terms and conditions or as set out specifically in the Viega order confirmation. Terms of Payment: Terms are net 30 days. Payable in U.S.
PAGE 284
Zero Lead identifies Viega products meeting the lead-free requirements of NSF 61 through testing under NSF/ANSI 372 (0.25% or less maximum weighted average lead content). 01098_EN_USA_0120_1 Viega products are designed to be installed by licensed and trained plumbing and mechanical professionals who are familiar with our products’ proper use and installation. Installation by non-professionals may void Viega LLC’s warranty. Viega LLC 585 Interlocken Blvd.