Product Overview

Tech Data
Viega Stainless Manifold Shut-O󶈴 /
Balancing
Viega LLC
585 Interlocken Blvd.
Broom󶈵eld, CO 80021
Phone [phone]
www.viega.us
TD-HC 1119 Stainless Manifold Shut-Off - Balancing
Description
Stainless manifolds are to be used in closed
loop hydronic heating, cooling and snow
melting systems. These preassembled
1¼" diameter stainless supply and return
manifolds come attached to two 6⅝"
spacing brackets for compact remote
mounting. This stainless manifold provides
shut-o󶈴 and balancing valves for each circuit. Manifolds used
with 󶈶ow rates up to 2 gpm per circuit, maximum of 18 gpm
per manifold. The air bleeder and purge valve are connected
and factory tested. Has 1¼" union connection, 1" NPT
removable end caps. SVC circuit connection 󶈵ttings are sold
separately.
Speci󶈵cations
■ 1¼" 304 Stainless Header Stock
■ Factory Installed Air Bleeder
■ Mounting Brackets
■ Max. Operating Temperature: 180°F (short periods of 200°F)
■ Max. Operating Pressure: 100 psi
■ Return Valve C
v
: 2.98
■ Supply Valve C
v
: 3.35
The return manifold is 󶈵tted with shut-o󶈴 valves which are
suitable to receive optional 24V powerheads for control
over each circuit via thermostat.
This document is subject to updates. For
the most current Viega technical literature
please visit www.viega.us.
Viega products are designed to be installed by
licensed and trained plumbing and mechanical
professionals who are familiar with Viega
products and their installation. Installation by
non-professionals may void Viega LLC’s warranty.
Manifold
Width
Just
Manifold
(in)
Width With Ball
Valve Set and
Adapter Fitting
(in)
Width With Ball
Valve Set and
Fittings For Flow
Through (in)
2 outlets 8.71 12.96 14.96
3 outlets 10.7 14.95 16.95
4 outlets 12.7 16.95 18.95
5 outlets 14.6 18.85 20.85
6 outlets 16.6 20.85 22.85
7 outlets 18.6 22.85 24.85
8 outlets 20.5 24.75 26.75
9 outlets 22.5 26.75 28.75
10 outlets 24.5 28.75 30.75
11 outlets 26.4 30.65 32.65
12 outlets 28.4 32.65 34.65
Height 12.1
Depth 3.6
Depth
with ball
valve set
handles
4.26
3.40"
6.69"
5.90"
12.26"
11.42"
5.32"
12.20"
Note: Use part numbers 5070 and 15069
with this manifold
Dimensions
* When extending the manifold, Viega requires using thread sealant
paste on the 1" NPT manifold end connection.