Product Overview

5 of 11
Viega... The global leader in plumbing, heating and pipe joining systems
301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: [phone] • www.viega.com
©2011, ProPress
®
, FostaPEX
®
, Seapress
®
, MegaPress
®
, MegaPressG
®
and Viega
®
are registered trademarks of Viega GmbH & Co. PureFlow
®
, Smart Connect
®
, Climate Panel
®
, Climate Mat
®
, Climate Trak
®
,
MANABLOC
®
, Radiant Wizard
®
, S-no-Ice
®
, Snap Panel
®
, XL
®
and XL-C
®
are registered trademarks of Viega LLC. MiniBloc
™
, ProRadiant
™
, PolyAlloy
™
, SmartLoop
™
and Zero Lead
™
are trademarks of Viega LLC;
GeoFusion
™
, ProPressG
™
and ViegaPEX
™
are trademarks of Viega GmbH & Co. KG.
Product
Instructions
PI-PR-561051 0312 (Enhanced Mixing Station)
Technical Data
167 °F (75 °C) 0.75 psi (0.05 bar)
194 °F (90 °C) 4.06 psi (0.28 bar)
230 °F (110 °C) 15.7 psi (1.08 bar)
Liquid temperature Min. inlet pressure
Supply voltage: 1x115V +/-10 %, 60Hz.
Motor protection: The pump requires no external
motor protection.
Enclosure class: Indoor use only, IP42.
CSA Enclosure Type 2.
Insulation class: F.
Relative air humidity: Maximum 95 %.
Maximum discharge pressure: 150 psi (10.34 bar).
Inlet pressure:
Sound pressure level: 43 dB (A).
To avoid condensation in the control box and stator,
the liquid temperature must always be higher than the
ambient temperature.
+32 °F
(0 °C)
+50 °F
(+10 °C)
+68 °F
(+20 °C)
+86 °F
(+30 °C)
+95 °F
(+35 °C)
+104 °F
(+40 °C)
Liquid temperature
Ambient
temperature
[°F (°C) ] Min. [°F (°C) ] Max. [°F (°C) ]
+36 °F
(+2 °C)
+50 °F
(+10 °C)
+68 °F
(+20 °C)
+86 °F
(+30 °C)
+95 °F
(+35 °C)
+104 °F
(+40 °C)
+230 °F
(+110 °C)
+230 °F
(+110 °C)
+230 °F
(+110 °C)
+230 °F
(+110 °C)
+194 °F
(+90 °C)
+158 °F
(+70 °C)
Maximum glycol concentrations:
50 % glycol @ 36 °F (2 °C).
Hydraulic performance change can be expected.
Watt readings: Accuracy +/-1 Watt.
Flow indicator:
Provides a relative indication of ow — should
not be used in lieu of a ow meter.
Check valve:
Use of check valve may reduce pump hydraulic
performance (up to -10%). Use check valve in
parallel pumping applications.
Curve conditions:
Test liquid: Airless water.
Curves apply to a density of 983.2 kg/m3 and a
liquid temperature of +140 °F (+60 °C).
All curves show average values and should not be
used as guarantee curves. If a specic minimum
performance is required, individual measurements
must be made.
Curves apply to a kinematic viscosity of 0.474 cSt.
Approximate power usage:
High xed speed 39W 45W
Medium xed speed 15W 30W
Low xed speed 5W 8W
Constant pressure 8W 45W
Constant pressure 14W 45W
Constant pressure 22W 45W
AutoADAPT 5W 45W
Speed Setting Min. Max.
III
II
I
III
II
I
III
II
I
III
II
I
III
II
I
III
II
I
III
II
I