User guide

Appendix A 1080p Configuration with Sony Cameras
72
Switch Position
Video Format
Sony EVI-3V / EVI-7V
7
VISCA Control
Both
8
1080p / 50 fps
7V Only
9
1080p / 25 fps
7V Only
A
1080i / 50 fps
7V Only
B
720p / 50 fps
Both
C
720p / 25 fps
Both
If you don’t have a VISCA cable and you want to set the configuration for 1080p/30fps, set the Sony EVI-
HD7V camera to capture in 1080i/59.94 mode. The correct setting for this option is position 2 on the
SYSTEM SELECT dial.
Note: After configuring the camera, reset it to activate the new video format setting.
CONFIGURING THE SETTINGS FOR 1080P
When you have completed configuring the camera, you should set the video settings as described in the
“Changing Video Settings” section on page 48. For example, for the HD-220, you should select these
options:
 In the Display Resolution field, select 1080p.
 In the Max Tx Bandwidth field, select 2M or faster.
Also note that it’s possible to increase the call video rate while in an active call by pressing 9# on
the VidyoRoom remote control.
 In the Transmit Resolution field, select 1080P30.
Note: If a VidyoRoom HD-100 or HD-50 systems are to receive a 1080p/30 video format from the HD-220
systems, the display resolution on those systems must be configured for 1080p resolution.