User guide

8. Using the Web Configuration Pages
58
Device
Band-
width
360p30
450p30
540p30
720p30
720p60
1080p15
1080p30
HD-110/
HD-220
384 Kbps
  
HD-110/
HD-220
512 Kbps
  
HD-110/
HD-220
768 Kbps
  
HD-110/
HD-220
1 Mbps
   
HD-110/
HD-220
2 Mbps
  
HD-110/
HD-220
3 Mbps
 
HD-110/
HD-220
4 Mbps
 
1
Available only on Web Configuration pages; not available from end-user Settings page.
Note: If you change the Tx Bandwidth or Transmit Resolution, you can click the Apply button to
apply the changes. If the VidyoRoom is in a conference, the changes will not take effect until
the next conference.
f. If the Camera Control field is present for your VidyoRoom model, you can reset the camera or
compensate for backlighting.
g. If the Anti Flicker field is present for your VidyoRoom model, select 50Hz for Europe or 60Hz for
North America (one of these settings will work correctly in most of the world). If your users use
webcams that don’t have the anti-flicker feature, you can enable this setting.
8. In the Other Prefs section:
a. In the IR Receiver field, select between using an internal IR receiver or an external IR receiver.
b. In the Auto Answer field, select On if you want the VidyoRoom to automatically answer incoming
calls.
c. In the Join/Exit tones field, select On if you want to hear a tone every time someone joins or
leaves the conference.
You might want to select Off when you’re in a conference with hundreds of endpoints.
d. In the Far end camera control field, you can determine whether or not other users in a
conference with your VidyoRoom can control your camera. For FECC to work, the camera in your
room must be capable of electronic tilt and pan (such as the Sony EVI-HD1).
e. In the Auto Adjust Microphone Level field, select On to increase the microphone’s sensitivity
when a soft-spoken person speaks and decrease it a bit when things get loud.