User guide

8. Using the Web Configuration Pages
57
3. In the UPD Port Range section, enter the appropriate values in the UDP Start and UDP End fields if
you want to define a range of UDP ports for use with your VidyoRoom.
4. In the Proxy section, select whether you want to use a VidyoProxy.
5. In the Web Proxy section, enter the PAC script address for use with the VidyoRoom in the Proxy
Auto-Configuration Script field.
Vidyo supports PAC scripts only; static web proxy addresses and auto-detection of web proxies are
not supported. If you enter a web proxy address that requires authentication, a pop-up appears,
and you must enter the web proxy username and password. You then have to reboot the system.
6. In the Audio section, drag the sliders to change the maximum sensitivity of the mic and volume of
the speakers.
7. In the Video section:
a. In the Displays field, select either Single or Dual displays to match your configuration.
b. In the Display Resolution field, select 720p or 1080p resolution.
If your display can only do 720p, there’s no advantage in selecting 1080p. If your display can do
1080p, you can choose 720p if you want to use less bandwidth.
c. In the Overscan field, select the overscan percentage or leave it set to the default.
d. In the Maximum Tx Bandwidth field, select the maximum bandwidth at which you want the
VidyoRoom to transmit.
The options available vary depending on your VidyoRoom model.
e. In the Transmit Resolution field, choose your transmit resolution.
The options available vary depending on your VidyoRoom model and Maximum Tx Bandwidth
(for example, 1080p30 won’t be available if your Maximum Tx Bandwidth is set to less than 2
Mbps). These resolutions are now available:
Device
Band-
width
360p30
450p30
540p30
720p30
720p60
1080p15
1080p30
HD-50
384 Kbps



HD-50
512 Kbps



HD-50
768 Kbps



HD-50
1 Mbps



HD-50
2 Mbps



HD-100
384 Kbps




HD-100
512 Kbps




HD-100
768 Kbps




HD-100 1 Mbps


1
  
HD-100 2 Mbps


1
  