User guide

2. Installing the VidyoRoom

HD-50 REV. C

Do not power on the HD-50 until the display(s) and camera are fully connected and powered on.

1. Connect the power cable.

2. Connect an Ethernet cable to ETH-o and to your network.

3. Connect to the display using an HDMI-HDMI cable.

Note: You can connect a second display to the VGA port.

(The second display is for data share viewing only.)

4. Connect a USB Webcam camera cable to an available USB port.

5. Connect a USB speakerphone cable to an available USB port.