User guide
2. Installing the VidyoRoom
9
HD-100 REV. C
Note: Stands must be used when placing the unit
vertically.
Do not power on the HD-100 until the display(s) and
camera are fully connected and powered on.
1. Connect the power cable.
2. Connect an Ethernet cable to ETH-0 and to your
network.
3. Connect to a display using an HDMI-HDMI cable
to HDMI-to-TV.
You can connect a second display to the VGA
port. (The second display is for data share
viewing only.)
4. Connect the camera.
Use DVI/DVI cable for Sony or DVI/HDMI cable for
Minrray.
For the Camera Control connection:
a. Connect VISCA cable to camera.
b. Connect VISCA cable to USB/Serial DB9 cable.
c. Connect USB/Serial DB9 cable to the CAM
CTRL port on the unit.
5. Connect a USB speakerphone cable to an
available USB port
.