User guide

2. Installing the VidyoRoom
8
HD-110 REV. C
Note: Stands must be used when placing the unit
vertically.
Do not power on the HD-110 unit until display(s) and
camera are fully connected and powered on.
1. Connect the power cable.
2. Connect an Ethernet cable to ETH-0 and to your
network.
3. Connect a display using an HDMI-DVI cable to
the DVI display converter and then connect to an
available display port.
Repeat for the second display.
4. Connect the camera.
Use DVI/DVI cable for Sony or DVI/HDMI cable
for Minrray.
For the Camera Control connection:
a. Connect VISCA cable to camera.
b. Connect VISCA cable to USB/Serial DB9
cable.
c. Connect USB/Serial DB9 cable to the
CAMCTRL port on the unit.
5. Connect a USB speakerphone cable to an
available USB port. (Don’t use the USB 3.0
ports.)