Product specifications

Note: The VidyoRoom system must be version 2.0.3 or higher to support 1080p

encode resolutions.

To enable the 1080p/30fps transmit format for calls on the VidyoRoom HD220

system, you must properly conﬁgure both the camera and the room system.

Prior to connecting the Sony EVI-HD3V or EVI-7V camera to the VidyoRoom,

select the resolution desired and conﬁgure the camera to output that video for-

mat. To set the camera’s resolution, locate the POT screw control dial in the rear

of the camera marked SYSTEM SELECT. The numbers on the POT dial correspond

to the video resolution and frame rates output from the camera to the VidyoR-

oom HD220 system.

The Minrray camera is set via VISCA, so VISCA must be connected.

Setting Video Formats\

You set video formats on the back of the camera as shown below:

Video Format Table

Switch Position Video Format EVI-3V / EVI-7V

0 1080p / 60 fps 7V Only

1 1080p / 30 fps 7V Only

2 1080i / 60 fps 7V Only

3 720p / 60 fps Both

4 720p / 30 fps Both

5 VGA/60 fps (Letterbox) Both

8 1080p / 50 fps 7V Only

9 1080p / 25 fps 7V Only

A 1080i / 50 fps 7V Only

B 720p / 50 fps Both

C 720p / 25 fps Both

For conﬁguration supporting 1080p/30fps, set the Sony EVI-HD7V camera to

capture in 1080i/59.94 mode. The correct setting for this option is position #2

on the SYSTEM SELECT POT dial control.

1080p Conﬁguration with the VidyoRoom HD220 Appendix