Product specifications

TM
17
Connecting Your VidyoRoom for Your HD-100 Rev C System Connecting Your VidyoRoom for Your HD-100 Rev C System
Sony EVI-HD3V
OR
Front Back
1. Power
3. Primary Display
3. Secondary Display
(For Data Share viewing only)
2. Ethernet
DVI/DVI
for Sony
Capture
Card
DCONNECTION
USB TO SERIAL
VGA
HDMI
Audio Device
Video Device
4.
4c.
4a. VISCA
CAM CTRL
4b.
AUX USB port
Chat 50
Chat 150
OR
OR
5.
Konftel 300
Use only one audio device
between the above
VGA2USB (optional)
For 720p set to #3
Minrray HDCAM90-S-VY
DVI/HDMI
for Minrray
Audio Device
Power button
Do not power on the HD-100 unit until Display(s) and Camera are fully
connected and powered on.
1. Connect Power cable.
2. Connect Ethernet cable to ETH-O and to your network.
3. Connect to TV using HDMI to HDMI cable on
HDMI-to-TV.
NOTE: A second screen can be connected to the VGA port
(2
nd
display is for Data Share viewing only).
4. Connect camera:
* For video connection use HDMI/DVI cable for Sony or
HDMI/HDMI cable for Minrray
* For Camera Control connection:
a. Connect VISCA cable to camera
b. Connect VISCA cable to USB 2.0/Serial DB9 cable
c. Connect USB/Serial DB9 cable to the CAM CTRL port on
the unit
5. Connect USB SpeakerPhone cable to an available
USB 2.0 port.
Initial VidyoRoom Setup for HD-100 Rev. C
Do Not Remove
Do Not Remove