Product specifications

TM
10
Initial VidyoRoom Setup for HD-220 Rev A
4. Connect camera:
* For video connection use HDMI/DVI cable for Sony
or HDMI/HDMI cable for Minrray
* For Camera Control connection:
a. Connect VISCA cable to camera
b. Connect VISCA cable to USB/Serial DB9 cable
c. Connect USB/Serial DB9 cable to the CAMCTRL port on
the unit
5. Connect a USB SpeakerPhone cable to an available
USB port.
NOTE: Stands must be used when placing the unit vertically.
Do not power on the HD-220 unit until Display(s) and Camera are fully con-
nected and powered on.
1. Connect Power cable.
2. Connect Ethernet cable to ETH-O and to your network.
3. Connect the TV using HDMI/DVI cable to DVI Display
dongle and then connect to an available display port.
* Repeat for the second display
Front Back
1. Power
3. Primary & Secondary
Display
Adapter,
Display Port/DVI
2. Ethernet
DBCONNECTION
USB TO SERIAL
VISCA
4a.
4b.
4c.
5.
Yamaha PJP-20UR
VGA2USB (optional)
Konftel 300
OR
Use only one audio device
between the above
Audio Device
Video Device
4.
OR
OR
Minrray HDCAM90-S-VY
(1080p@30fps)
Sony EVI-HD7V
(1080p@30fps)
Preferred
Sony EVI-HD3V
(720p@60fps)
HDMI/DVI
for Sony
HDMI/HDMI
for Minrray
Power Button