Instruction manual

General Rules VIDRE LCD Monitors
1.2.2 Notice
All information in this manual is subject to change without notice. The information in this
manual is published for informational use only .
1.3 EMC
The EMC regulations are observed only under the following condition:
• use high quality shielded cables at data inputs and outputs.
1.3.1 FCC Emission Information
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
Changes or modifications not expressly approved by PTV Professional TeleVision GmbH can
effect emission compliance and could void the user’s authority to operate this equipment.
1.3.2 CE Declaration
We, PTV Professional TeleVision GmbH, declare under our sole responsibility that the VIDRE
LCD Monitors meets the intent of the following directives, standards and specifications:
• 89/336/EEC Electromagnetic Compatibility
• EN 50081-1 Emissions, EN 55022, EN 55103-1
• EN 50082-1 Immunity, EN 55024,EN 55103-2
1.4 Care and Cleaning
Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD
monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass
cleaners.
Slots and openings on the back or top of the cabinet are for ventilation. They must not be
blocked or covered. Your monitor should never be placed near or over a radiator or heat
source, or in a built-in installation unless proper ventilation is provided.
Never push objects or spill liquid of any kind into this product.
1.5 Contacting Support
For further information please contact your local dealer or contact PTV Professional TeleVision
GmbH for sales or technical support. Use any of the following methods:
PTV Professional TeleVision GmbH
Kirchweg 62 B
D-24558 Henstedt-Ulzburg
tel +49 - 4193 - 997 80
fax +49 - 4193 - 997 820
sales email info @ vidre.de
support email support @ vidre.de
web www.vidre.de
When calling for support, have all information on the product (serial number etc.) at hand
Operation Manual Page 7 of 44