Instruction manual

General Rules VIDRE LCD Monitors

1 General Rules

1.1 Safety Instructions

1.1.1 General rules

Only use the device as directed in a dry atmosphere. Treat the VIDRE LCD Monitor with the

same care as other studio devices. Please follow the advice in the following operators manual.

Damages in transit If the device shows obvious damages from transit the shipper in question

must be notified and the dealer must be informed.

1.1.2 Repairs

The VIDRE LCD Monitors does not require any extra maintenance. There are no user

serviceable parts at the device. Repairs should be sent to an authorized service partner.

1.1.3 Servicing

Do not attempt to service this product yourself, as opening or removing covers may expose

you to dangerous voltages or other risks. If any of the above mentioned misuse or other

accident such as dropping or mishandling occurs, contact qualified service personnel for

servicing.

1.1.4 Power Safety

The AC plug isolates this equipment from the AC supply.

The power supply cord serves as a power disconnect device for pluggable equipment. The

socket outlet should be installed near the equipment and be easily accessible.

This product should be operated from the type of power indicated on the marked label. If you

are not sure of the type of power available, consult your dealer or local power company.

1.2 Trademarks

VIDRE and the VIDRE logo are trademarks of PTV Professional TeleVision GmbH. GeFei, MIO

and Gra-Vue logos are trademarks of Gefei Tech. Co. Ltd.All other trademarks are the property

of their respective holders.

1.2.1 Copyright

No part of this document may be reproduced, translated into another language, stored in a

retrieval system, or transmitted, in any form or by any means, electronic or mechanical,

including photocopying or recording, or otherwise without the express written permission of

PTV Professional TeleVision GmbH.

Technical changes are reserved. All brand and product names mentioned herein are used for

identification purposes only, and are trademarks or registered trademarks of their respective

holders.

Information in this publication replaces all previously published information. PTV Professional

TeleVision GmbH assumes no responsibility for errors or omissions.

Neither is any liability assumed for damages resulting from the use of the information

contained herein. Whenever it is likely that safe operation is impaired, the instrument must be

made inoperative and secured against unintended operation. The appropriate service authority

must then be informed.

Operation Manual Page 6 of 44