Instruction manual

I/O Panel and Connections VIDRE LCD Monitors
8.2.8 RCA 2p Audio connector
The pin assignment of the Audio I/O follows the standard.
The table below list the pin out.
Pin No. Function Pin No. Function
L / out Audio left output L / in Audio left input
R / out Audio right output R / in Audio right input
!!! This inputs are not available at VT series monitors !!!
8.2.9 Dsub 9p Remote connector
The pin assignment of the Remote I/O follows the standard.
The table below list the pin out.
Pin No. Function Pin No. Function
1 NC 6 NC
2 Receive data (RD) 7 NC
3 Transmit data (TD) 8 NC
4 NC 9 NC
5 Ground
!!! This inputs are not available at VT series monitors !!!
8.2.10 USB connector
The pin assignment of the USB I/O follows the standard.
Using the USB connections the built-in USB hub can be used to connect external USB powered
devices to the monitor.
!!! The USB port is not assigned to control or operate the VT series monitors !!!
Operation Manual Page 39 of 44