Instruction manual

I/O Panel and Connections VIDRE LCD Monitors
8.2.2 DVI-D 24p connector
The pin assignment of the DVI I/O follows the standard.
The table below list the pin out.
Pin No. Function Pin No. Function
1 TMDS data 2- 13 NC
2 TDMS data 2+ 14 +5 V DC
3 TDMS data 2 ground 15 Ground
4 NC 16 Hot plug detect
5 NC 17 TMDS data 0-
6 Clock line SCL 18 TDMS data 0+
7 Data line SDA 19 TDMS data 0 ground
8 NC 20 NC
9 TMDS data 1- 21 NC
10 TDMS data 1+ 22 TMDS clock ground
11 TDMS data 1 ground 23 TMDS clock +
12 NC 24 TMDS clock -
8.2.3 BNC 2p HDSDI connector
The pin assignment of the HDSDI I/O follows the standard.
The table below list the pin out.
Pin No. Function Pin No. Function
outer Ground inner HDSDI 4:2:2 1.5 Gbit/s 0.8 Vpp 75 Ohms
8.2.4 HDMI 18p HDMI connector
The pin assignment of the HDSDI I/O follows the standard.
The table below list the pin out.
Pin No. Function Pin No. Function
1 TDMS data 2+ 11 TMDS clock shield
2 TMDS data 2 shield 12 TMDS clock -
3 TMDS data 2- 13 CEC
4 TDMS data 1+ 14 NC
5 TMDS data 1 shield 15 DDC
Operation Manual Page 37 of 44